instead of axq_link.
This (among a bunch of uncommitted work) is required for EDMA chips
to correctly transmit frames on the CABQ.
Tested:
* AR9280, hostap mode
* AR9380/AR9580, hostap mode (staggered beacons)
TODO:
* This code only really gets called when burst beacons are used;
it glues multiple CABQ queues together when sending to the hardware.
* More thorough bursted beacon testing! (first requires some work with
the beacon queue code for bursted beacons, as that currently uses the
link pointer and will fail on EDMA chips.)
the descriptor link pointer, rather than directly.
This is needed on AR9380 and later (ie, EDMA) NICs so the multicast queue
has a chance in hell of being put together right.
Tested:
* AR9380, AR9580 in hostap mode, CABQ traffic (but with other patches..)
In physio, check if device can handle unmapped IO and pass an
appropriately mapped buffer to the driver strategy routine. The
only driver in the tree that can handle unmapped buffers is one
exposed by GEOM, so mark it as such with the new flag in the
driver cdevsw structure.
This fixes insta-panics on hosts, running dconschat, as /dev/fwmem
is an example of the driver that makes use of physio routine, but
bypasses the g_down thread, where the buffer gets mapped normally.
Discussed with: kib (earlier version)
Merge change from illumos:
1694 Add type-aware print() action
This is a very nice feature implemented in upstream Dtrace.
A complete description is available here:
http://dtrace.org/blogs/eschrock/2011/10/26/your-mdb-fell-into-my-dtrace/
This change bumps the DT_VERS_* number to 1.9.0 in
accordance to what is done in illumos.
While here also include some minor cleanups to ease further merging
and appease clang with a fix by Fabian Keil.
Illumos Revisions: 13501:c3a7090dbc16
13483:f413e6c5d297
Reference:
https://www.illumos.org/issues/1560https://www.illumos.org/issues/1694
Tested by: Fabian Keil
Obtained from: Illumos
MFC after: 1 month
size and usage in hrStorageAllocationUnits. If the file system has
more than 2^31 allocations it can not be shown correctly and the
meters are useless.
In such cases follow net-snmp behaviour and increase
hrStorageAllocationUnits so the values fit under INT_MAX.
PR: bin/177183
Submitted by: Eugene Grosbein egrosbein rdtc.ru
MFC after: 2 weeks
Merge changes from illumos:
1451 DTrace needs toupper()/tolower() subroutines
1457 lltostr() D subroutine should take an optional base
This change bumps the DT_VERS_* number to 1.8.1 in
accordance to what is done in illumos.
The test suite we currently include is outdated and
doesnt support some updates in tst.subr.d which had to
be left out for now.
Illumos Revisions: r13458 5e394d8db762
r13459 c3454574dd1a
Reference:
https://www.illumos.org/issues/1451https://www.illumos.org/issues/1457
Tested by: Fabian Keil
Obtained from: Illumos
MFC after: 1 month
It is already done in SSIF interface code.
This reduces contention/spinning reported by many users.
PR: kern/172166
Submitted by: Eric van Gyzen <eric at vangyzen.net>
MFC after: 2 weeks
for migrating callouts to new CPU. This value is passed to
callout_cc_add() in order to update properly precision field in case of
rescheduling/migration.
Reviewed by: mav
extra read from PxCI/PxSACT registers. If only NCQ commands are running, we
don't really need PxCI. If only non-NCQ commands are running we don't need
PxSACT. Mixed set may happen only on controllers with FIS-based switching
when port multiplier is attached, and then we have to read both registers.
MFC after: 1 month
- Replace single done mutex with per-disk ones. On system with several
disks on several HBAs that removes small, but measurable lock congestion.
- Modify disk destruction process to not destroy the mutex prematurely.
- Remove some extra pointer derefences.
In some other shells, things like $((a);(b)) are command substitutions.
Also, there are shells that have an extension ((ARITH)) that evaluates an
arithmetic expression and returns status 1 if the result is zero, 0
otherwise. This extension may lead to ambiguity with two subshells starting
in sequence.
Merge change from illumos:
1455 DTrace tracemem() should take an optional size argument
Our local enhancements to dt_print_bytes were equivalent to
those in illumos but we made it match the illumos version
to ease further code merges.
For now leave out tst.smallsize.d and tst.smallsize.d.out
since those don't seem to work cleanly on FreeBSD.
This change bumps the DT_VERS_* number to 1.7.1 in accordance
to what is done in illumos.
Illumos Revision: 13457:571b0355c2e3
Reference:
https://www.illumos.org/issues/1455
Tested by: Fabian Keil
Obtained from: Illumos
MFC after: 1 month
that could never be reached in vm_radix_insert(). (If the pointer being
checked by the panic call were ever NULL, the immmediately preceding loop
would have already crashed on a NULL pointer dereference.)
Reviewed by: attilio (an earlier version)
Sponsored by: EMC / Isilon Storage Division
Use destroy_dev_sched_cb() to not wait for device destruction while holding
GEOM topology lock (that actually caused deadlock). Use request counting
protected by mutex to properly wait for outstanding requests completion in
cases of device closing and geom destruction. Unlike r227009, this code
does not block taskqueue thread for indefinite time, waiting for completion.
more topology change done that may require its attention. Add few missing
g_do_wither() calls in respective places to signal it.
This fixes potential infinite loop here when some provider is withered, but
still opened or connected for some reason and so can not be destroyed. For
example, see r227009 and r227510.
on signed integer overflow wrapping. Otherwise mktime(3) and timegm(3)
can hang, in case the timestamp passed in struct tm is not representable
in a time_t. Specifically, any timestamp after 2038-01-19 03:14:07, in
combination with a 32-bit time_t.
Note that it would be better to change the code to not rely on undefined
behaviour, but it is contributed code, and it is not entirely trivial to
fix the issue properly.
MFC after: 3 days
related issues.
Moving the TX locking under one lock made things easier to progress on
but it had one important side-effect - it increased the latency when
handling CABQ setup when sending beacons.
This commit introduces a bunch of new changes and a few unrelated changs
that are just easier to lump in here.
The aim is to have the CABQ locking separate from other locking.
The CABQ transmit path in the beacon process thus doesn't have to grab
the general TX lock, reducing lock contention/latency and making it
more likely that we'll make the beacon TX timing.
The second half of this commit is the CABQ related setup changes needed
for sane looking EDMA CABQ support. Right now the EDMA TX code naively
assumes that only one frame (MPDU or A-MPDU) is being pushed into each
FIFO slot. For the CABQ this isn't true - a whole list of frames is
being pushed in - and thus CABQ handling breaks very quickly.
The aim here is to setup the CABQ list and then push _that list_ to
the hardware for transmission. I can then extend the EDMA TX code
to stamp that list as being "one" FIFO entry (likely by tagging the
last buffer in that list as "FIFO END") so the EDMA TX completion code
correctly tracks things.
Major:
* Migrate the per-TXQ add/removal locking back to per-TXQ, rather than
a single lock.
* Leave the software queue side of things under the ATH_TX_LOCK lock,
(continuing) to serialise things as they are.
* Add a new function which is called whenever there's a beacon miss,
to print out some debugging. This is primarily designed to help
me figure out if the beacon miss events are due to a noisy environment,
issues with the PHY/MAC, or other.
* Move the CABQ setup/enable to occur _after_ all the VAPs have been
looked at. This means that for multiple VAPS in bursted mode, the
CABQ gets primed once all VAPs are checked, rather than being primed
on the first VAP and then having frames appended after this.
Minor:
* Add a (disabled) twiddle to let me enable/disable cabq traffic.
It's primarily there to let me easily debug what's going on with beacon
and CABQ setup/traffic; there's some DMA engine hangs which I'm finally
trying to trace down.
* Clear bf_next when flushing frames; it should quieten some warnings
that show up when a node goes away.
Tested:
* AR9280, STA/hostap, up to 4 vaps (staggered)
* AR5416, STA/hostap, up to 4 vaps (staggered)
TODO:
* (Lots) more AR9380 and later testing, as I may have missed something here.
* Leverage this to fix CABQ hanling for AR9380 and later chips.
* Force bursted beaconing on the chips that default to staggered beacons and
ensure the CABQ stuff is all sane (eg, the MORE bits that aren't being
correctly set when chaining descriptors.)
to stuck beacons.
* Set the cabq readytime (ie, how long to burst for) to 50% of the total
beacon interval time
* fix the cabq adjustment calculation based on how the beacon offset is
calculated (the SWBA/DBA time offset.)
This is all still a bit magic voodoo but it does seem to have further
quietened issues with missed/stuck beacons under my local testing.
In any case, it better matches what the reference HAL implements.
Obtained from: Qualcomm Atheros
held. The ttm_buffer_object_transfer() does not need the mutex locked
at all, except for the call to the driver sync_obj_ref() method.
Reported and tested by: dumbbell
MFC after: 2 weeks
Limit write requests to at most INT_MAX.
This prevents a certain common programming error (passing -1 to write)
from leading to other problems deeper in the library.
References:
https://github.com/libarchive/libarchive/commit/22531545514043e0
Reported by: Xin Li <delphij@FreeBSD.org>
Obtained from: libarchive (master branch)
With some recent busdma refactoring, sometimes it happens that a sync
op gets called when bus_dmamap_load() never got called, which results
in a spurious warning about a map mismatch when no sync operations will
actually happen anyway. Now the check is done only if a sync operation
is actually performed, and the result of the check is a panic, not just
a printf.
Reviewed by: cognet (who prevented me from donning a point hat)
