SDHCI_TRNS_ACMD12 is to be set only for multiple-block read/write
commands without data length information, so don't unconditionally
set this bit. The result matches what e. g. Linux does.
- Section 2.2.19 of the SDHCI specification version 4.20 states that
SDHCI_ACMD12_ERR should be only valid if SDHCI_INT_ACMD12ERR is set
and hardware may clear SDHCI_ACMD12_ERR when SDHCI_INT_ACMD12ERR is
cleared (differing silicon behavior is specifically allowed, though).
Thus, read SDHCI_ACMD12_ERR before clearing SDHCI_INT_ACMD12ERR.
While at it, use the 16-bit accessor rather than the 32-bit one for
reading the 16-bit SDHCI_ACMD12_ERR.
- SDHCI_INT_TUNEERR isn't one of the ROC bits in SDHCI_INT_STATUS so
clear it explicitly.
- Add missing prototypes and sort them.
netfront_backend_changed() is called from the xenwatch_thread(), which means
that the curvnet is not set. We have to set it before we can call things like
arp_ifinit().
PR: 230845
Due to hardware limitation AMD I2C controller can't trigger pending
interrupt if interrupt status has been changed after clearing
interrupt status bits. So, I2C will lose the interrupt and IO will be
timed out. Implements a workaround to disable I2C controller interrupt
and re-enable I2C interrupt before existing interrupt handler.
Submitted by: rajfbsd@gmail.com
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D16720
The original NVMe API used bit-fields to represent fields in data
structures defined by the specification (e.g. the op-code in the command
data structure). The implementation targeted x86_64 processors and
defined the bit fields for little endian dwords (i.e. 32 bits).
This approach does not work as-is for big endian architectures and was
changed to use a combination of bit shifts and masks to support PowerPC.
Unfortunately, this changed the NVMe API and forces #ifdef's based on
the OS revision level in user space code.
This change reverts to something that looks like the original API, but
it uses bytes instead of bit-fields inside the packed command structure.
As a bonus, this works as-is for both big and little endian CPU
architectures.
Bump __FreeBSD_version to 1200081 due to API change
Reviewed by: imp, kbowling, smh, mav
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D16404
As discussed on the MLs drm2 conflicts with the ports' version and there
is no upstream for most if not all of drm. Both have been merged in to
a single port.
Users on powerpc, 32-bit hardware, or with GPUs predating Radeon
and i915 will need to install the graphics/drm-legacy-kmod. All
other users should be able to use one of the LinuxKPI-based ports:
graphics/drm-stable-kmod, graphics/drm-next-kmod, graphics/drm-devel-kmod.
MFC: never
Approved by: core@
became unused in FreeBSD 12.x as a side-effect of the NUMA-related
changes.)
Reviewed by: kib, markj
Discussed with: jeff, re@
Differential Revision: https://reviews.freebsd.org/D16825
This is an amalgam of a patch by Doug Ambrisko to
generalize uart_acpi_find_device, imp moving the
ACPI table to uart_dev_ns8250.c and advice by jhb
to work around a bug in the EPYC 3151 BIOS
(the BIOS incorrectly marks the serial ports as
disabled)
Reviewed by: imp
MFC after: 8 weeks
Differential Revision: https://reviews.freebsd.org/D16432
Without this patch, some CS4614 cards will need users to reload the driver manually or
the hardware won't be initialised properly. Something like:
# kldload snd_csa
# kldunload snd_csa
# kldload snd_csa
Tested with: Terratec SiXPack 5.1+
I was not aware Warner was making or planning to make forward progress in
this area and have since been informed of that.
It's easy to apply/reapply when churn dies down.
Inspired by r338025, just remove the element size parameter to the
MODULE_PNP_INFO macro entirely. The 'table' parameter is now required to
have correct pointer (or array) type. Since all invocations of the macro
already had this property and the emitted PNP data continues to include the
element size, there is no functional change.
Mostly done with the coccinelle 'spatch' tool:
$ cat modpnpsize0.cocci
@normaltables@
identifier b,c;
expression a,d,e;
declarer MODULE_PNP_INFO;
@@
MODULE_PNP_INFO(a,b,c,d,
-sizeof(d[0]),
e);
@singletons@
identifier b,c,d;
expression a;
declarer MODULE_PNP_INFO;
@@
MODULE_PNP_INFO(a,b,c,&d,
-sizeof(d),
1);
$ rg -l MODULE_PNP_INFO -- sys | \
xargs spatch --in-place --sp-file modpnpsize0.cocci
(Note that coccinelle invokes diff(1) via a PATH search and expects diff to
tolerate the -B flag, which BSD diff does not. So I had to link gdiff into
PATH as diff to use spatch.)
Tinderbox'd (-DMAKE_JUST_KERNELS).
instead of the size of the whole bge_devs array.
This should stop kldxref searching beyond the end of .rodata when it
processes relocations, and emitting "unhandled relocation type" errors,
at least on i386.
This is very primitive code to inspect the PCI error state and AER
error state, dump the log and clear errors, from ddb.
pci_print_faulted_dev() is made external to allow calling it from
other places. It was called from NMI handler but this chunk is not
included.
Also there is a tunable-controlled code to clear AER on device attach,
disabled by default.
All this code was useful to me when I debugged ACPI_DMAR failures (not
faults) long time ago.
Reviewed by: cem, imp (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D7813
Summary:
PowerISA 3.0 adds a 'darn' instruction to "deliver a random number". This
driver was modeled after (rather, copied and gutted of) the Ivy Bridge
rdrand driver.
This uses the "Conditional Random Number" behavior to remove input bias.
From the ISA reference the 'darn' instruction, and the random number
generator backing it, conforms to the NIST SP800-90B and SP800-90C
standards, compliant to the extent possible at the time the hardware was
designed, and guarantees a minimum 0.5 bits of entropy per bit returned.
Reviewed By: markm, secteam (delphij)
Approved by: secteam (delphij)
Differential Revision: https://reviews.freebsd.org/D16552
hashfilters. Two because the driver needs to look up a hashfilter by
its 4-tuple or tid.
A couple of fixes while here:
- Reject attempts to add duplicate hashfilters.
- Do not assume that any part of the 4-tuple that isn't specified is 0.
This makes it consistent with all other mandatory parameters that
already require explicit user input.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
The libkqueue tests have several places that leak memory by using an
idiom like:
puts(kevent_to_str(kevp));
Rework to save the pointer returned from kevent_to_str() and then
free() it after it has been used.
Reported by: asomers (pointer to Coverity), Coverity
CID: 1296063, 1296064, 1296065, 1296066, 1296067, 1350287, 1394960
Sponsored by: Dell EMC
r330951 by smh fixed the mps driver to avoid deadlocks when panicing.
The same code is needed for mpr, so port it here, along with the fix
which allows the CCBs scheduled to complete avoiding at least a scary
message and likely other unintended consequences.
Sponsored by: Netflix
Differential Review: https://reviews.freebsd.org/D16663
When we're shutting down, we send a number of start/stop commands to
the known targets. We have to wait for them to complete. During a
panic, the interrupts are off, and using pause to wait for them to
fire and complete won't work: we have to poll after pause returns so
the completion routines of the CCBs run so we decrement work
outstanding counts.
Sponsored by: Netflix
Differential Review: https://reviews.freebsd.org/D16663
Move evdev_ev_kbd_event() helper from evdev to kbd.c as otherwise evdev
unconditionally requires all keyboard and console stuff to be compiled
into the kernel. This dependency happens as evdev_ev_kbd_event() helper
references kbdsw global variable defined in kbd.c through use of
kbdd_ioctl() macro.
While here make all keyboard drivers respect evdev_rcpt_mask while setting
typematic rate and LEDs with evdev interface.
Requested by: Milan Obuch <bsd@dino.sk>
Reviewed by: hselasky, gonzo
Differential Revision: https://reviews.freebsd.org/D16614
Now softc should be retrieved from struct edvev * pointer
with evdev_get_softc() helper.
wmt(4) is a sample of driver that support both KPI.
Reviewed by: hselasky, gonzo
Differential Revision: https://reviews.freebsd.org/D16614
Newer chips may require assert/deassert after power down for proper
startup. Check respective flag in DEVIDLE_CTRL and perform operation
if neccesssary.
PR: 221777
Submitted by: marc.priggemeyer@gmail.com
Obtained from: DragonFly BSD
Tested on: Thinkpad T470
Updates in the format described in section 9.11 of the Intel SDM can
now be applied as one of the first steps in booting the kernel. Updates
that are loaded this way are automatically re-applied upon exit from
ACPI sleep states, in contrast with the existing cpucontrol(8)-based
method. For the time being only Intel updates are supported.
Microcode update files are passed to the kernel via loader(8). The
file type must be "cpu_microcode" in order for the file to be recognized
as a candidate microcode update. Updates for multiple CPU types may be
concatenated together into a single file, in which case the kernel
will select and apply a matching update. Memory used to store the
update file will be freed back to the system once the update is applied,
so this approach will not consume more memory than required.
Reviewed by: kib
MFC after: 6 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D16370
