Commit Graph

110149 Commits

Author SHA1 Message Date
Julian Elischer
6e6281a3dc Small formatting change..
Move a declaration to the same place as in NetBSD.

Obtained from:	NetBSD
MFC after:	1 week
2004-12-14 03:54:08 +00:00
Nate Lawson
edd84e4843 Checkpoint reworking the man page to be more useful to non-developers,
document some debug output variables, etc.  Mdoc assistance welcome.
2004-12-14 01:07:44 +00:00
Nate Lawson
276cd9216d Unify ACPI_DEBUG support for all OEM drivers under ACPI_OEM. Since more than
one will never be supported on the same platform, this does not hurt
debugging.

MFC after:	3 days
2004-12-13 23:31:46 +00:00
Warner Losh
93c22173bd The format of the MLINKS entries is pairwise, not MLINKS += wise. So
list kernel_mount.9 the required number of times to allow make
installworld to complete.
2004-12-13 23:09:19 +00:00
Roman Kurakin
f41d84e53a Make code MPSAFE.
You could turn this off by debug.mpsafenet=0 for full network
stack or via debug.{cp|cx|ctau}.mpsafenet for cp(4), cx(4) and
ctau(4) accordingly.

MFC after:	10 days
2004-12-13 22:07:23 +00:00
Andrew Gallatin
aee409b987 Make kttcp work in -stable (and -current)
- Removed kttcp_sosend() and kttcp_soreceive() in favor of using
  sosend() / soreceive() with UIO_NOCOPY.  The locking changes in the
  socket layer make merging the kttcp_so* and the so* routines a real
  pain.  It was a lot easier to just use the integrated routines.

- Eliminated KTTCP_MAX_XMIT restrictions on send and receive sizes
  because I encountered no problems with streams larger than MAX_INT.
  MAX_INT bytes is only good for a few seconds at 4Gb/sec ;)

- Removed Giant from send / recv routines.

- Fixed character device protos, cdevsw init, etc, to work in 5.x /
  6.x

Reviewed by: sam
MFC after: 1 week
2004-12-13 20:40:16 +00:00
Tom Rhodes
fe10ebf1f4 Add kernel_mount.9 and appropriate MLINKS to the build. 2004-12-13 19:29:40 +00:00
Tom Rhodes
610b07d6a3 Add a manual page to document phk's mount work.
Reviewed by:	phk (content), brueffer (grammar and markup)
2004-12-13 19:25:30 +00:00
Sam Leffler
1034272d55 correct module dependency 2004-12-13 18:26:13 +00:00
Sam Leffler
169b73b33a correct module dependency 2004-12-13 18:12:26 +00:00
Brian Somers
1f82daa58f Add ``enable echo''. 2004-12-13 17:54:30 +00:00
Warner Losh
7a7e867742 LINT defines things which compile in code that as referring to the old
a_desc element.  change this to the new a_gen.a_desc to reflect
changes to vnode_if.h generation.

Noticed by: tinderbox, phk
2004-12-13 17:53:20 +00:00
Brian Somers
71c1c49abb Mention the necessity for ``enable echo'' in ppp(8). 2004-12-13 17:52:10 +00:00
Jeff Roberson
3ef6ac3361 - If delivering a signal will result in killing a process that has a
nice value above 0, set it to 0 so that it may proceed with haste.
   This is especially important on ULE, where adjusting the priority
   does not guarantee that a thread will be granted a greater time slice.
2004-12-13 16:45:57 +00:00
Suleiman Souhlal
3d96167a54 Exporting of NTFS filesystem broke in rev 1.70. Fix it.
Approved by:	phk, grehan (mentor)
2004-12-13 16:21:48 +00:00
David E. O'Brien
b8e19b78df Back the warnings down from 9 to 6, since that is the highest we have. If
we added a WARNS 7 level, it shouldn't be assumed this code will pass it.
2004-12-13 15:42:46 +00:00
Brian Somers
cf4bdb6e94 Handle select() returning -1/EINTR - fairly common in these KSE days.
PR:		74972
MFC after:	3 days
2004-12-13 14:50:13 +00:00
Jeff Roberson
2d59a44dc0 - Take up a 'slot' while we're on the assigned queue, waiting to be
posted to another processor.  Otherwise, kern_switch() gets confused
   and tries to sched_add(NULL).
2004-12-13 13:09:33 +00:00
Pawel Jakub Dawidek
89dd8e5326 bioq_insert_head() function is already in subr_disk.c. 2004-12-13 13:02:06 +00:00
Pawel Jakub Dawidek
bf4843166f Add bioq_insert_head() function.
OK'd by:	phk
2004-12-13 12:57:21 +00:00
Brian Somers
125eb366ea Implement an ``enable/disable echo'' option, defaults to off.
This allows LCP ECHOs to be enabled independently of LQR reports.

Note: This introduces a change in the default behaviour (search for lqr and
echo in the man page).  I'll update UPDATING to reflect this.

PR:		74821
2004-12-13 12:51:19 +00:00
Niels Heinen
8a7a5b487d Add myself to the committers' birthday calendar
Approved by nectar (mentor)
2004-12-13 12:22:28 +00:00
Poul-Henning Kamp
5cb471d04d Don't forget to bypass vnodes in corner cases.
Found by:	kkenn and ports/shell/zsh
Thanks to:	jeffr
2004-12-13 10:07:57 +00:00
Julian Elischer
1cc7d59e34 Might as well get the right $NetBSD$ string while we are at it.
MFC after:	1 week
2004-12-13 08:12:06 +00:00
Julian Elischer
cd015c5e87 Diff reduction to NetBSD.
Now only things that are different between us and NetBSD show up.
Means that these files are more of NetBSD style in some places but
since thay are NetBSD files, um, that's ok.

Obtained from:	NetBSD
MFC after: 1 week
2004-12-13 08:08:57 +00:00
Julian Elischer
18b5fd62f9 MFNetBSD
Whitespace diff reduction, formatting fixes and one actual
arithmetic error that NetBSD have fixed.

Obtained from:	NetBSD
MFC after: 1 week
2004-12-13 07:45:02 +00:00
Poul-Henning Kamp
1dc4727ea3 Another FNONBLOCK -> O_NONBLOCK.
Don't unconditionally set IO_UNIT to device drivers in write:  nobody
checks it, and since it was always set it did not carry information anyway.
2004-12-13 07:41:19 +00:00
Poul-Henning Kamp
ab9caf9d67 Use O_NONBLOCK instead of FNONBLOCK alias. 2004-12-13 07:37:29 +00:00
Warner Losh
57c75b8f1a Rather than casting through a (void *) to avoid the aliasing warning,
do things correctly from an aliasing perspective.  Put the
vop_generic_args element as the first element for all the vop_*_args
and adjust the code to take the address of that instead of the
structure.

OK'd based on a vague description by: phk
2004-12-13 07:23:34 +00:00
Poul-Henning Kamp
f0d5cba935 Explicit panic in vop_read/vop_write for devices 2004-12-13 07:13:21 +00:00
Warner Losh
1239b0391a We don't need vnode.h, but do need uio.h in these files. vnode.h
shouldn't be included in drivers, generally, so remove them.

OK'd by: phk
2004-12-13 07:09:54 +00:00
Scott Long
5662cf3c92 Remove a stray critical_exit().
Submitted by: johan
2004-12-13 07:08:44 +00:00
Warner Losh
a9557e2194 Add sys/uio.h explicitly, and move sys/vnode.h include to be more
alphabetical.

# vnode.h should not be included here, but it is required for proper decoding
# of the flags args.  This may change in the future...
2004-12-13 07:08:22 +00:00
Poul-Henning Kamp
dce357b112 Explicitly panic vop_read/vop_write on fifos. 2004-12-13 07:07:50 +00:00
Nate Lawson
6c69283ca8 Re-enable link programming on resume. It appears the previous bounds
error had caused the hang and it has been corrected now.
2004-12-13 06:59:34 +00:00
Warner Losh
317ccb1fc3 sys/vnode.h is inappropriate for a driver. Use sys/uio.h instead. 2004-12-13 06:26:23 +00:00
Alan Cox
db24060c25 Correct the handling of two unusual cases by the zero-copy receive path,
specifically, vm_pgmoveco():
1. If vm_pgmoveco() sleeps on a busy page, it must redo the look up
because the page may have been freed.
2. If the receive buffer is copy-on-write due to, for example, a fork,
then although the first vm object in the shadow chain may not contain
a page there may still be one from a backing object that is mapped.
Thus, a pmap_remove() is required for the new page rather than the
backing object's page to been seen by the application.

Also, add some comments to vm_pgmoveco() and update some assertions.

Tested by: ken@
2004-12-13 06:24:14 +00:00
Warner Losh
98a67cd840 Cast from the specific vop_*_args to vop_generic_args via a (void *)
pointer to eliminate the hundreds of warnings that we have in tree at
the moment.

# Chances are good that all the struct vop_*_args should have, as its
# first element, the struct vop_generic_args, and when necessary to
# reference it, we just take its address rather than going through
# this double case.
2004-12-13 06:13:52 +00:00
Warner Losh
da5c87ba08 Crank down the lame-o-matic a notch by moving the = inside the /* */ rather
than outside to fix the build.
2004-12-13 05:41:33 +00:00
Warner Losh
1336b18228 Make this compile when you don't have /sys. 2004-12-13 04:59:35 +00:00
Sam Leffler
472f08ca8f cover up the landmine until there's a proper solution 2004-12-13 04:26:36 +00:00
Scott Long
e9948397f9 Remove the addition of ACPI_DEBUG that was accidentally added in the last
commit.
2004-12-13 03:23:08 +00:00
Scott Long
82d4da0f73 Allow the acpi_ibm module to be built with ACPI_DEBUG. 2004-12-13 03:22:11 +00:00
Julian Elischer
d0a9f61fea Try make code for teh M$ Intellimouse less obtrusive
when not using such a device.
2004-12-13 02:20:48 +00:00
Scott Long
e97cb7b11f Make sure that opt_ddb.h exists so that this will compile with ACPI_DEBUG 2004-12-13 02:13:08 +00:00
Julian Elischer
22c2b56594 Don't export the 'dt' field as that would break the exisiting ABI.
keep the code but comment it out so that if the ABI changes we
can see easily what should be done.

Submitted by:	iedowse
2004-12-13 01:23:49 +00:00
Marcel Moolenaar
26e8ef3fe8 Unbreak the MAKEOBJDIRPREFIX variable check by avoiding bugs in make(1).
When make flags are passed to make in the environment, the string is
chopped up in an (argc,argv) vector. This happens in brk_string() and
the chopped up string is stored in static buffer. When this includes
something like "-V BINMAKE", then a pointer into the static buffer is
put on the variables list for evaluation later. However, brk_string()
is used for more than just chopping up the MAKEFLAGS env. variable, so
it's very likely that the static buffer is clobbered. In fact, this is
exactly what happens.
The result is that _MAKEOBJDIRPREFIX gets assigned whatever garbage
the child make happens to emit, causing the test to fail. Like this:

pluto2% cd /usr/src
pluto2% make -V BINMAKE
"/q/6.x/src/Makefile", line 94: MAKEOBJDIRPREFIX can only be set in environment, not as a global (in /etc/make.conf) or command-line variable.
pluto2% make -dv -V BINMAKE | & grep _MAKEOBJDIRPREFIX
Global:_MAKEOBJDIRPREFIX = }

The fix is to not use MAKEFLAGS for this, but simple pass the flags
as arguments. Ideally make(1) should be fixed but that's beyond the
scope of my attention span.

This fixes release.
2004-12-13 00:49:52 +00:00
Julian Elischer
0e7470486d Revert addition of Lide scanner entry..
It's a duplicate of an already exisiting entry. (with another name).
2004-12-13 00:25:03 +00:00
Warner Losh
caf7668334 Bump revision of FreeBSD for 802.11 framework update. 2004-12-12 22:42:17 +00:00
Warner Losh
6c5c0a5ac1 Separate mse driver into a core driver and a bus attachments. Separate out
the ISA and CBUS (called isa on pc98) attachments.  Eliminate all PC98
ifdefs in the process (the driver in pc98/pc98/mse.c was a copy of the one
in i386/isa/mse.c with PC98 ifdefs).  Create a module for this driver.

I've tested this my PC-9821RaS40 with moused.  I've not tested this on i386
because I have no InPort cards, or similar such things.  NEC standardized
on bus mice very early, long before ps/2 mice ports apeared, so all PC-98
machines supported by FreeBSD/pc98 have bus mice, I believe.

Reviewed by: nyan-san
2004-12-12 20:05:50 +00:00