Formerly, it was possible for the file to be created between the check if it
existed and the open; the contents would then be lost.
Because this must use O_EXCL, noclobber > will not create a file through a
symlink anymore. This agrees with behaviour of other shells.
Approved by: ed (mentor) (implicit)
getgroups for ibcs emulation. It seems vanishingly likely any
programs will actually be affected since they probably assume a much
lower value and use a static array size.
pointer to the containing mbuf. This eliminates a strong assumption
about the layout of network buffer memory, giving us greater
flexibility to revise mbuf semantics in the future.
reassembly but failed to be modernized over time:
- Use queue(9).
- Specifically allocate queue entries of type M_SPXREASSQ to point at
member mbufs, rather than casting mbuf data to 'spx_q'.
- Maintain the mbuf pointer as part of the queue entry so that we can
later free the mbuf without using dtom().
Intel agrees with my reading of the docs, make it so for all G4X chips.
The new register also has a 32 bit width as opposed to 24 bits. Fix
things up so that the counters roll over properly.
MFC after: 3 days
Now that we start to use credentials on character devices more often
(because of MPSAFE TTY), move the prison-checks that are in place in the
TTY code into devfs.
Instead of strictly comparing the prisons, use the more common
prison_check() function to compare credentials. This means that
pseudo-terminals are only visible in devfs by processes within the same
jail and parent jails.
Even though regular users in parent jails can now interact with
pseudo-terminals from child jails, this seems to be the right approach.
These processes are also capable of interacting with the jailed
processes anyway, through signals for example.
Reviewed by: kib, rwatson (older version)
altered through their .init code. This might happen if init
vector calls dlopen on its own and that dlopen causes some not
yet initialized object to be initialized earlier as part of that
dlopened DAG.
Do not reset module reference counts to zero on final fini vector
run when process is exiting. Just add an additional parameter to
force fini vector invocation regardless of current reference count
value if object was not destructed yet. This allows dlclose called
from fini vector to proceed normally instead of failing with handle
validation error.
Reviewed by: kib
Reported by: venki kaps
not in cpu_exit(). The latter is called after td_md.md_highfp_mtx
has been destroyed, which results in a race condition when another
thread wants to use the high FP registers on the CPU that still has
the high FP registers in question.
- remove mbuf iovec - useful, but adds too much complexity when isolated to
the driver
- remove driver private caching - insufficient benefit over UMA to justify
the added complexity and maintenance overhead
- remove separate logic for managing multiple transmit queues, with the
new drbr routines the control flow can be made to much more closely resemble
legacy drivers
- remove dedicated service threads, with per-cpu callouts one can get the same
benefit much more simply by registering a callout 1 tick in the future if there
are still buffered packets
- remove embedded mbuf usage - Jeffr's changes will (I hope) soon be integrated
greatly reducing the overhead of using kernel APIs for reference counting
clusters
- add hysteresis to descriptor coalescing logic
- add coalesce threshold sysctls to allow users to decide at run-time
between optimizing for forwarding / UDP or optimizing for TCP
- add once per second watchdog to effectively close the very rare races
occurring from coalescing
- incorporate Navdeep's changes to the initialization path required to
convert port and adapter locks back to ordinary mutexes (silencing BPF
LOR complaints)
- enable prefetches in get_packet and tx cleaning
Reviewed by: navdeep@
MFC after: 2 weeks
Output quoted suitable for re-input to the shell occurs in
various cases such as 'set', 'trap'.
Bugfix: *, ? and [ must be quoted (except sole [)
Bugfix: ~ and # must be quoted (really only sometimes, but keep it simple)
Bugfix: space, tab and newline must always be quoted
Shortening: other IFS characters do not need quoting
Bugfix: send to correct output file, not hard-coded stdout
Shortening: avoid unnecessary '' with \'
Approved by: ed (mentor)
below key_setsaval().
Without that, the lookup for the SA had failed as we were looking for
a SA with the new, updated port numbers instead of the old ones and
were comparing the ports in key_cmpsaidx().
This makes updating the remote -> local SA on the initiator work again.
Problem introduced with: p4 changeset 152114
Add necessary changes to the kernel for this (basically introduce a
bpf_zero_counters() function). As well, update the man page.
MFC after: 1 month
Discussed with: rwatson
- Reduce scope where return value can be referenced.
- Add a dummy access to timestamp to silence warning.
Submitted by: Mingyan Guo <guomingyan gmail com>
NGROUPS_MAX, eliminate ABI dependencies on them, and raise the to 1024
and 1023 respectively. (Previously they were equal, but under a close
reading of POSIX, NGROUPS_MAX was defined to be too large by 1 since it
is the number of supplemental groups, not total number of groups.)
The bulk of the change consists of converting the struct ucred member
cr_groups from a static array to a pointer. Do the equivalent in
kinfo_proc.
Introduce new interfaces crcopysafe() and crsetgroups() for duplicating
a process credential before modifying it and for setting group lists
respectively. Both interfaces take care for the details of allocating
groups array. crsetgroups() takes care of truncating the group list
to the current maximum (NGROUPS) if necessary. In the future,
crsetgroups() may be responsible for insuring invariants such as sorting
the supplemental groups to allow groupmember() to be implemented as a
binary search.
Because we can not change struct xucred without breaking application
ABIs, we leave it alone and introduce a new XU_NGROUPS value which is
always 16 and is to be used or NGRPS as appropriate for things such as
NFS which need to use no more than 16 groups. When feasible, truncate
the group list rather than generating an error.
Minor changes:
- Reduce the number of hand rolled versions of groupmember().
- Do not assign to both cr_gid and cr_groups[0].
- Modify ipfw to cache ucreds instead of part of their contents since
they are immutable once referenced by more than one entity.
Submitted by: Isilon Systems (initial implementation)
X-MFC after: never
PR: bin/113398 kern/133867
package rather than expecting our top level package to get all of
the dependencies correct.
Previously, the code depended on the top level package having all
of the pkgdep lines in +CONTENTS correct and in the right order,
but that doesn't always happen due to code such as this (in
security/gnutls/Makefile):
.if (defined(WITH_LZO) || exists(${LOCALBASE}/lib/liblzo2.so)) && !defined(WITHOUT_LZO)
LIB_DEPENDS+= lzo2:${PORTSDIR}/archivers/lzo2
....
With such conditional dependencies, my 'sophox-packages' package won't
install. The dependency tree looks like this:
sophox-packages
...
x11/gnome2
x11/gnome-applets
net/libgweather
devel/libsoup
security/gnutls
security/libgcrypt
security/libgpg-error
...
x11/gnome2
archivers/file-roller
archivers/gtar
archivers/lzop
archivers/lzo2
...
gnutls doesn't depend on lzo2 initially, but lzo2 is dragged into the
mix via other dependencies and is built by the initial 'make'. The
subsequent package generation for gnutls adds a pkgdep line for lzo2
to gnutls' +CONTENTS but the pkgdeps in sophox-packages' +CONTENTS
has gnutls *before* lzo2.
As a result, sophox-packages cannot install; gnutls fails because lzo2
is missing, 82 more packages fail because gnutls is missing and the
whole thing spirals into a super-confusing mess!
MFC after: 3 weeks
system callers of getgroups(), getgrouplist(), and setgroups() to
allocate buffers dynamically. Specifically, allocate a buffer of size
sysconf(_SC_NGROUPS_MAX)+1 (+2 in a few cases to allow for overflow).
This (or similar gymnastics) is required for the code to actually follow
the POSIX.1-2008 specification where {NGROUPS_MAX} may differ at runtime
and where getgroups may return {NGROUPS_MAX}+1 results on systems like
FreeBSD which include the primary group.
In id(1), don't pointlessly add the primary group to the list of all
groups, it is always the first result from getgroups(). In principle
the old code was more portable, but this was only done in one of the two
places where getgroups() was called to the overall effect was pointless.
Document the actual POSIX requirements in the getgroups(2) and
setgroups(2) manpages. We do not yet support a dynamic NGROUPS, but we
may in the future.
MFC after: 2 weeks
(Eyes of the daemon not synced and the motd not displayed properly
on black-on-white screens): The first one was not valid anymore
since the text and logo were swapped already, the second one is
fixed by resetting the whole colourscheme instead of only the
background colour.
(also removed svn:keywords from motd since it doesn't have the
string $FreeBSD$ in it)
PR: misc/15876
Submitted by: peter.jeremy@ALCATEL.COM.AU
MFC after: 1 week
