to make sure the pipe is ready. Some devices apparently don't support
the clear stall command however. So what happens when you issue such
devices a clear stall command? Typically, the command just times out.
This, at least, is the behavior I've observed with two devices that
I own: a Rio600 mp3 player and a T-Mobile Sidekick II.
It used to be that after the timeout expired, the pipe open operation
would conclude and you could still access the device, with the only
negative effect being a long delay on open. But in the recent past,
someone added code to make the timeout a fatal error, thereby breaking
the ability to communicate with these devices in any way.
I don't know exactly what the right solution is for this problem:
presumeably there is some way to determine whether or not a device
supports the 'clear stall' command beyond just issuing one and waiting
to see if it times out, but I don't know what that is. So for now,
I've added a special case to the error checking code so that the
timeout is once again non-fatal, thereby letting me use my two
devices again.
passing along socket information. This is required to work around a LOR with
the socket code which results in an easy reproducible hard lockup with
debug.mpsafenet=1. This commit does *not* fix the LOR, but enables us to do
so later. The missing piece is to turn the filter locking into a leaf lock
and will follow in a seperate (later) commit.
This will hopefully be MT5'ed in order to fix the problem for RELENG_5 in
forseeable future.
Suggested by: rwatson
A lot of work by: csjp (he'd be even more helpful w/o mentor-reviews ;)
Reviewed by: rwatson, csjp
Tested by: -pf, -ipfw, LINT, csjp and myself
MFC after: 3 days
LOR IDs: 14 - 17 (not fixed yet)
This changes the naming of USB serial devices to: /dev/ttyU%d and
/dev/cuaU%d for call-in and call-out devices respectively. (Please
notice: capital 'U')
Please also note that we now have .init and .lock devices for USB
serial ports. These are not persistent across device removal. devd(8)
can be used to configure them on attachment time.
These changes also improve the chances of the system surviving if
the USB device is unplugged at an inconvenient time. At least we
do not rip things apart while there are any threads in the device
driver anymore.
Remove cdevsw, rely on the tty generic one.
Don't make_dev(), use ttycreate() which does all the magic.
In detach, do close procesing if we ripped things apart
while the device was open. Call ttyfree() once we're done
cleaning up.
generic way. This code will allow a similar amount of code to be
removed from most if not all serial port drivers.
Add generic cdevsw for tty devices.
Add generic slave cdevsw for init/lock devices.
Add ttypurge function which wakes up all know generic sleep
points in the tty code, and calls into the hw-driver if it
provides a method.
Add ttycreate function which creates tty device and optionally
cua device. In both cases .init/.lock devices are created
as well.
Change ttygone() slightly to also call the hw driver provided
purge routine.
Add ttyfree() which will purge and destroy the cdevs.
Add ttyconsole mode for setting console friendly termios
on a port.
is one, detect mbuf loops and stop, add an extra arg so you can only print
the first x bytes of the data per mbuf (print all if arg is -1), print
flags using %b (bitmask)...
No code in the tree appears to use m_print, and it's just a maner of adding
-1 as an additional arg to m_print to restore original behavior..
MFC after: 4 days
select(2), and discovered to my horror that ugen(4)'s bulk in/out support
is horribly lobotomized. Bulk transfers are done using the synchronous
API instead of the asynchronous one. This causes the following broken
behavior to occur:
- You open the bulk in/out ugen device and get a descriptor
- You create some other descriptor (socket, other device, etc...)
- You select on both the descriptors waiting until either one has
data ready to read
- Because of ugen's brokenness, you block in usb_bulk_transfer() inside
ugen_do_read() instead of blocking in select()
- The non-USB descriptor becomes ready for reading, but you remain blocked
on select()
- The USB descriptor becomes ready for reading
- Only now are you woken up so that you can ready data from either
descriptor.
The result is select() can only wake up when there's USB data pending. If
any other descriptor becomes ready, you lose: until the USB descriptor
becomes ready, you stay asleep.
The correct approach is to use async bulk transfers, so I changed
the read code to use the async bulk transfer API. I left the write
side alone for now since it's less of an issue.
Note that the uscanner driver has the same brokenness in it.
to 7422 since it appears that the 8169S can't transmit anything larger..
The 8169S can receive full jumbo frames, but we don't have an mru to let
the upper layers know this...
add fixup so that this driver should work on alignment constrained platforms
(!i386 && !amd64)
MFC after: 5 days
MAXWIN to the register window manipulation functions - rwindow_load()
calls rwindow_save() so this one addition should take care of both.
This should help find places that pcb_nsaved doesn't get initialized
properly.
Suggested by: jake
but it is possible:
1. Read data from good component for synchronization.
2. Write data to the same area.
3. Write synchronization data, which are now stale.
Found by: tegge (for gmirror)
on anything but DEVFS and in this case it was not even used (see below).
Put the NFS4 vop method for fifo's behind "#if 0" because it is unused.
Add a XXX comment to say that I think the unusedness is a bug.
for the new thread. The rest of the fields in the pcb wind up being
written to before they're read as a normal part of the pcb usage but
this field may be read upon return to userland, having it be uninitialized
garbage is bad.
Submitted by: Andrew Belashov (bel at orel dot ru)
Reviewed by: jake
MFC after: 3 days
but it is possible:
1. Read data from good component for synchronization.
2. Write data to the same area.
3. Write synchronization data, which are now stale.
Found by: tegge
mutexes instead.
This closes the last (known) race issues in ATA which should fix
the various hangs etc seen on heavy loaded systems.
Change from using timeout functions to using callout functions in
the timeout code. This together with above closes the race that could
happen if timeout and device interrupt occured simultaniously.
Also fix the possible recursion in ata_reinit() on very dodgy
devices that could take us down in the probe.
the trapframe via kdb_frame, but kdb_frame was not initialized until
after the call to kdb_cpu_trap(). Ergo: kdb_cpu_trap() was moved too
far up.
Pointy hat: marcel
the mbuf due to use of m_pulldown. Discarding the result because of this
does not make sense as no subsequent code depends on the entire msg being
linearized (only the individual pieces). It's likely something else is wrong
here but for now this appears to get things back to a working state.
Submitted by: Roselyn Lee
I have from Broadcom does not give much information on these devices,
so the Broadcom Linux driver was used for clues to what these chips
support. It turns out they are similar to the 5705 with the 5751
being the PCI-Express version and needing special work-arounds and
settings.
Use kthread_exit() instead of falling through the end of the worker
thread's main function. Since kthread_exit() wakeup(9)s everyone
sleeping on the thread handle, drop the superfluous wakeup() call.
When net.inet.ip.check_interface was MFCed to RELENG_4 3+ years ago in
rev. 1.130.2.17 ip_input.c it was 1 by default but shortly changed to
0 (accidently?) in rev. 1.130.2.20 in RELENG_4 only. Among with the
fact this knob is not documented it breaks POLA especially in bridge
environment.
OK'ed by: andre
Reviewed by: -current
frobbing the cdevsw.
In both cases we examine only the cdevsw and it is a good question if we
weren't better off copying those properties into the cdev in the first
place. This question will be revisited.
dev_refthread() will return the cdevsw pointer or NULL. If the
return value is non-NULL a threadcount is held which much be released
with dev_relthread(). If the returned cdevsw is NULL no threadcount
is held on the device.
use <machine/efi.h> for the necessary definitions. This makes the EFI
code in sys/boot/efi totally unused, except for pure EFI loaders. As
such, maintenance and porting (to IA-32) of the EFI code is made as easy
as possible.
because it was mostly irrelevant - except for the silly BIOS_PADDRTOVADDR
etc macros. Along the way of working around this, I missed a few things.
* Make syscons properly inherit the bios capslock/shiftlock/etc state like
i386 does. Note that we cannot inherit the bios key repeat rate because
that requires a bios call (which is impossible for us).
* Give syscons the ability to beep on amd64. Oops.
While here, make bios.c compile and add it to files.amd64.
PHYSADDR : Address of the physical memory
KERNPHYSADDR : Physical address where the kernel starts
KERNVIRTADDR : Virtual address of the kernel
STARTUP_PAGETABLE_ADDR : Where to put the page table at bootstrap
+ Xscale specific options
work out of the box too, but I have no hardware to test.
It works well enough to go multiuser. Network works, SATA does not, as I have
no drive to test.
Thanks to Intel for sending such a board.
Obtained from: NetBSD
Remove the cache state logic : right now, it provides more problems than it
helps.
Add helper functions for mapping devices while bootstrapping.
Reorganize the code a bit, and remove dead code.
Obtained from: NetBSD (partially)
tree:
- td_standin is (k + a) as it is only touched by either curthread or when
a thread is being created.
- td_upcall is (k + j)
- td_sticks is (k) rather than the earlier (j) note.
- td_uuticks and td_usticks are both (k).
- td_intrval is (j)
- Neither kg_nextupcall or kg_upquantum seem to be locked and that seems
to be on purpose, so mark those as (n).
