So, it turns out that the AR8327 has 7 ports internally:
* GMAC0 / external (CPU) MAC0
* GMAC1 / port1 -> GMAC5 / port5: external switch port PHYs
* GMAC6 / external (CPU) MAC1
Now, depending upon how things are wired up, the second CPU port (MAC1)
can be wired to either the switch (port6), or through port5's PHY, bypassing
the GMAC+switch entirely. Ie, it can pretend to be a boring PHY, saving
system designers from having to include a separate PHY for a "WAN" port.
Here's the rub - the AP135 board (QCA955x SoC) hooks up arge0 to
the second CPU port on the AR8327, but it's hooked up as RGMII.
So, in order to hook it up to the rest of the switch, it isn't configured
as a separate PHY - OpenWRT has it setup as connected via RGMII to
GMAC6 and (I'm guessing) it's set to be a WAN port by configuring up
port-based VLANs or something.
Thus, with a port mask of 0x3f, GMAC6 was never allowed to receive traffic
from any other port. It could transmit fine, but not receive anything.
So, now it works enough for me to continue doing board bootstrapping.
Note, this isn't enough to make the QCA955x + AR8327 work - there's
a bunch of uncommitted work to both the platform SoC (interrupt handling,
ethernet, etc) and the ethernet switch (register access space, setup, etc)
that needs to happen. However, this particular change is also relevant to
other SoCs, like the AR934x and AR7161, both of which can be glued to
this switch.
Tested:
* AP135 development board
TODO:
* Figure out whether I can somehow abuse another port mode to have this
be a pass-through PHY, or whether I should just create some more boot
time hints to explicitly set up port-based isolation so this works
in a more useful way by default.
The main purpose of this feature is to be able to unload a KMS driver.
When going back from the current vt(4) backend to the previous backend,
the previous backend is reinitialized with the special VDF_DOWNGRADE
flag set. Then the current driver is terminated with the new "vd_fini"
callback.
In the case of vt_fb and vt_vga, this allows the former to pass the
vgapci device vt_fb used to vt_vga so the device can be rePOSTed.
Differential Revision: https://reviews.freebsd.org/D687
expected to return the data in the memory location pointed at by target
after the operation. The FreeBSD atomic functions previously used return
either 0 or 1 to indicate if the comparison succeeded or not respectively.
With this change these functions only support ARMv6 and later are supported
by these functions.
Sponsored by: ABT Systems Ltd
There's a lot more to come - the QCA955x has a bunch more GPIO MUX
configuration, reminiscent of what the ARM chips let you do - but
it'll have to come later.
Change the numeric value of IPI_STOP_HARD so it doesn't occupy a valid IPI
slot. This can be done because IPI_STOP_HARD is actually delivered via NMI.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D1983
Pass all SR-IOV configuration to the kernel using an nvlist. The
main benefit that this offers is flexibility. It allows a driver
to accept any number of parameters of any type supported by the
SR-IOV configuration infrastructure with having to make any
changes outside of the driver.
It also offers the user very fine-grained control over the
configuration of the VFs -- if they want, they can have different
configuration applied to every VF.
Differential Revision: https://reviews.freebsd.org/D82
Reviewed by: jhb
MFC after: 1 month
Sponsored by: Sandvine Inc.
Add a function that validates that the user-provided SR-IOV
configuration is valid. This includes basic checks that the
structure of the configuration is correct (e.g. all required
configuration nodes are present) as well as validating against
a configuration schema.
The schema validation consists of:
- Ensuring that all required config parameters are present.
- If the schema defines a default value for a parameter,
adding the default value if the parameter is not set.
- Ensuring that no parameters are specified in the config
that are not defined in the schema.
- Ensuring that have the correct type defined in the schema.
- Ensuring that no configuration nodes are present for devices
that do not exist. For example, if 2 VFs are configured,
then we validate that a node called VF-5 does not exist.
Differential Revision: https://reviews.freebsd.org/D81
Reviewed by: jhb
MFC after: 1 month
Sponsored by: Sandvine Inc.
When creating VFs, we must size each SR-IOV BAR on the PF and
allocate a configuous I/O memory window large enough for every VF.
However, the window only needs to be aligned to a boundary equal
to the size of the window for a single VF.
When a VF attempts to allocate an I/O memory resource, we must
intercept the request in the pci driver and pass it off to the
SR-IOV code, which will allocate the correct window from the
pre-allocated memory space for the PF.
Inform the pci driver about the size and address of the BARs on
the VF when the VF is created. This is required by pciconf -b and
bhyve.
Differential Revision: https://reviews.freebsd.org/D78
Reviewed by: jhb
MFC after: 1 month
Sponsored by: Sandvine Inc.
The SR-IOV standard requires VFs to read all-ones when the VID
and DID registers are read. The VMM (hypervisor) is required to
emulate them instead. Make pci_read_config() do this emulation.
Change pci_user.c to use pci_read_config() to read config space
registers instead of going directly to the pcib so that the
emulated VID/DID registers work correctly on VFs. This is
required both for pciconf and bhyve PCI passthrough.
Differential Revision: https://reviews.freebsd.org/D77
Reviewed by: jhb
MFC after: 1 month
Sponsored by: Sandvine Inc.
Implement the interace to create SR-IOV Virtual Functions (VFs).
When a driver registers that they support SR-IOV by calling
pci_setup_iov(), the SR-IOV code creates a new node in /dev/iov
for that device. An ioctl can be invoked on that device to
create VFs and have the driver initialize them.
At this point, allocating memory I/O windows (BARs) is not
supported.
Differential Revision: https://reviews.freebsd.org/D76
Reviewed by: jhb
MFC after: 1 month
Sponsored by: Sandvine Inc.
Allow the ppt driver to attach to devices that were hinted to be
passthrough devices by the PCI code creating them with a driver
name of "ppt".
Add a tunable that allows the IOMMU to be forced to be used. With
SR-IOV passthrough devices the VFs may be created after vmm.ko is
loaded. The current code will not initialize the IOMMU in that
case, meaning that the passthrough devices can't actually be used.
Differential Revision: https://reviews.freebsd.org/D73
Reviewed by: neel
MFC after: 1 month
Sponsored by: Sandvine Inc.
Refactor PCI resource allocation code to allow a request for a
memory-mapped I/O window that is a multiple of a requested size.
This is needed by the SR-IOV code because the VF BARs are all
allocated contiguously. We can't just allocate a resource that is
a multiple of a single VF BAR because the size of an allocation
implies its alignment requirement.
Differential Revision: https://reviews.freebsd.org/D71
Reviewed by: jhb
MFC after: 1 month
Sponsored by: Sandvine Inc.
Refactor creation of PCI devices into helper methods that can be
used by the VF creation code.
Differential Revision: https://reviews.freebsd.org/D67
Reviewed by: jhb
MFC after: 1 month
Sponsored by: Sandvine Inc.
watchdog.c does an #ifdef DDB but does not #include "opt_ddb.h".
Fixing this turned up a missing include file.
MFC after: 1 week
X-MFC-With: r261495, r279410
When sendfile_getobj() is called on a DTYPE_SHM file, it never
initializes error, which is eventually returned to the caller.
Differential Revision: https://reviews.freebsd.org/D1989
Reviewed by: kib
Reported by: Brainy Code Scanner, by Maxime Villard.
property for devices that doesn't descend directly from gpiobus.
The parser supports multiple pins, different GPIO controllers and can use
arbitrary names for the property (to match the many linux variants:
cd-gpios, power-gpios, wp-gpios, etc.).
Pass the driver name on ofw_gpiobus_add_fdt_child(). Update gpioled to
match.
An usage example of ofw_gpiobus_parse_gpios() will follow soon.
x2APIC mode is detected and enabled. Current theory is that switching
the APIC mode while an IPI is in flight might be the issue.
Postpone switching to x2APIC mode until we are guaranteed that all
starting IPIs are already send and aknowledged. Use aps_ready signal
as an indication that the BSP is done with us.
Tested by: adrian
Sponsored by: The FreeBSD Foundation
MFC after: 2 months
Do not ever return doomed vnode from lookup. This could happen, if
not checked, since dvp is relocked in the 'looking up ourselves' case.
In the other case, since dvp is relocked, mount point might go away
while fdesc_allocvp() is called. Prevent the situation by doing
vfs_busy() before unlocking dvp. Reuse the vn_vget_ino_gen() helper.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
I2C real-time clock (RTC).
The DS3231 has an integrated temperature-compensated crystal oscillator
(TXCO) and crystal.
DS3231 has a temperature sensor, an independent 32kHz output (which can be
turned on and off by the driver) and another output that can be used as
interrupt for alarms or as a second square-wave output, which frequency and
operation mode can be set by driver sysctl(8) knobs.
Differential Revision: https://reviews.freebsd.org/D1016
Reviewed by: ian, rpaulo
Tested on: Raspberry pi model B
The current GSO implementation in netback is broken and causes errors on the
guest tx path. While this is fixed disable GSO in order to have a working
netback.
Sponsored by: Citrix Systems R&D
Discussed with: gibbs
The optimization made in r239940 is valid for struct mbuf's current structure
and size in FreeBSD, but hardcodes assumptions about sizes of struct mbuf,
which are unfortunately broken if additional data is added to the beginning of
struct mbuf
X-MFC note (discussed with rwatson):
This change requires the MPKTHSIZE definition, which is only available after
head@r277203 and will not be MFCed as it breaks mbuf(9) KPI.
A direct commit to stable/10 and merges to other branches to add the necessary
definitions to work with the code as-is will be done to facilitate this MFC
PR: 194314
MFC after: 2 weeks
Approved/Reviewed by: erj, jfv
Sponsored by: EMC / Isilon Storage Division
currently a spin lock. Apparently, the only reason for this is that
umtx_thread_exit() is called under the process spinlock, which put the
requirement on the umtx_lock. Note that the witness static order list
is wrong for the umtx_lock, umtx_lock is explicitely before any thread
lock, so it is also before sleepq locks.
Change umtx_lock to be the sleepable mutex. For the reason above, the
calls to umtx_thread_exit() are moved from thread_exit() earlier in
each caller, when the process spin lock is not yet taken.
Discussed with: jhb
Tested by: pho (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
from the git tree. This merges a lot that we're not using, but there's
too many files to be selective and have a hope of catching everything.
If there are conflicts with the rest of the tree, we'll resolve them
on a case by case basis.
MFC after: 2 weeks
Sponsored by: Netflix, Inc.
This will override the resource allocation of simplebus, and also
merge the resource allocation code which was in xlp_pci.c.
With this change the SoC devices that does not have proper PCI
resources will be on the FDT simplebus. We can remove
sys/mips/nlm/dev/cfi_pci_xlp.c and sys/mips/nlm/dev/uart_pci_xlp.c
