the default partition, eMMC v4.41 and later devices can additionally
provide up to:
1 enhanced user data area partition
2 boot partitions
1 RPMB (Replay Protected Memory Block) partition
4 general purpose partitions (optionally with a enhanced or extended
attribute)
Of these "partitions", only the enhanced user data area one actually
slices the user data area partition and, thus, gets handled with the
help of geom_flashmap(4). The other types of partitions have address
space independent from the default partition and need to be switched
to via CMD6 (SWITCH), i. e. constitute a set of additional "disks".
The second kind of these "partitions" doesn't fit that well into the
design of mmc(4) and mmcsd(4). I've decided to let mmcsd(4) hook all
of these "partitions" up as disk(9)'s (except for the RPMB partition
as it didn't seem to make much sense to be able to put a file-system
there and may require authentication; therefore, RPMB partitions are
solely accessible via the newly added IOCTL interface currently; see
also below). This approach for one resulted in cleaner code. Second,
it retains the notion of mmcsd(4) children corresponding to a single
physical device each. With the addition of some layering violations,
it also would have been possible for mmc(4) to add separate mmcsd(4)
instances with one disk each for all of these "partitions", however.
Still, both mmc(4) and mmcsd(4) share some common code now e. g. for
issuing CMD6, which has been factored out into mmc_subr.c.
Besides simply subdividing eMMC devices, some Intel NUCs having UEFI
code in the boot partitions etc., another use case for the partition
support is the activation of pseudo-SLC mode, which manufacturers of
eMMC chips typically associate with the enhanced user data area and/
or the enhanced attribute of general purpose partitions.
CAVEAT EMPTOR: Partitioning eMMC devices is a one-time operation.
- Now that properly issuing CMD6 is crucial (so data isn't written to
the wrong partition for example), make a step into the direction of
correctly handling the timeout for these commands in the MMC layer.
Also, do a SEND_STATUS when CMD6 is invoked with an R1B response as
recommended by relevant specifications. However, quite some work is
left to be done in this regard; all other R1B-type commands done by
the MMC layer also should be followed by a SEND_STATUS (CMD13), the
erase timeout calculations/handling as documented in specifications
are entirely ignored so far, the MMC layer doesn't provide timeouts
applicable up to the bridge drivers and at least sdhci(4) currently
is hardcoding 1 s as timeout for all command types unconditionally.
Let alone already available return codes often not being checked in
the MMC layer ...
- Add an IOCTL interface to mmcsd(4); this is sufficiently compatible
with Linux so that the GNU mmc-utils can be ported to and used with
FreeBSD (note that due to the remaining deficiencies outlined above
SANITIZE operations issued by/with `mmc` currently most likely will
fail). These latter will be added to ports as sysutils/mmc-utils in
a bit. Among others, the `mmc` tool of the GNU mmc-utils allows for
partitioning eMMC devices (tested working).
- For devices following the eMMC specification v4.41 or later, year 0
is 2013 rather than 1997; so correct this for assembling the device
ID string properly.
- Let mmcsd.ko depend on mmc.ko. Additionally, bump MMC_VERSION as at
least for some of the above a matching pair is required.
- In the ACPI front-end of sdhci(4) describe the Intel eMMC and SDXC
controllers as such in order to match the PCI one.
Additionally, in the entry for the 80860F14 SDXC controller remove
the eMMC-only SDHCI_QUIRK_INTEL_POWER_UP_RESET.
OKed by: imp
Submitted by: ian (mmc_switch_status() implementation)
We should be more verbose about read errors from biosdisk, except filter
out the floppy controller errors, which apparently are resulting from
read attempt from device without the media present.
Reviewed by: allanjude
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D10032
D8376 extended softfloat/hardfloat support, but used a macro that never
actually gets set except in libc and msun's Makefile.inc. So libc and libm
got built correctly, but any program including fenv.h itself assumed it was
on a hardfloat systen and emitted inline fpu instructions for
fedisableexcept() and friends.
Using __mips_soft_float makes everything work in all cases, since it's a
compiler-internal macro that is always set correctly for the target
PR: 217845
Submitted by: Dan Nelson <dnelson_1901@yahoo.com>
MFC after: 1 week
Fix the regex used to find vmprot table entries and add the missing include.
This fixes kdumps output of PFLT arguments which would previously look like:
5202 101546 ktrace PFLT 0x5ae000 0x2<><invalid>2
They now display correctly:
5202 101546 ktrace PFLT 0x5ac000 0x2<VM_PROT_WRITE>
MFC after: 1 week
pairwise to support the FreeBSD way of pushing and popping the page
fault flags. Ensure this by requiring every occurrence of pagefault
disable function call to have a corresponding pagefault enable call.
Obtained from: kmacy @
MFC after: 1 week
Sponsored by: Mellanox Technologies
codes. This will be used to fix bright colors.
Improve teken_256to8(). Use a lookup table instead of calculations. The
calculations were inaccurate since they used indexes into the xterm-256
6x6x6 color map instead of actual xterm colors. Also, change the threshold
for converting to a primary color: require the primary's component to be
2 or more higher instead of just higher. This affects about 1/5 of the
table entries and gives uniformly distributed colors in the 6x6x6 submap
except for greys (35 entries each for red, green, blue, cyan, brown and
magenta, instead of approx. only 15 each for the mixed colors). Even
more mixed colors would be better for matching colors, but uniform
distribution is best for preserving contrast.
For teken_256to16(), bright colors are just the ones with luminosity >=
60%. These are actually light colors (more white instead of more
saturation), while xterm bright colors except for white itself are
actually saturated with no white, so have luminosity only 50%.
These functions are layering violations. teken cannot do correct
conversions since it shouldn't know the color maps of anything except
xterm. Translating through xterm-16 colors loses information. This
gives bugs like xterm-256 near-brown -> xterm-16 red -> VGA red.
The ptrace() user has the option of discarding the signal. In such a
case, p_ptevents should not be modified. If the ptrace() user decides to
send a SIGKILL, ptevents will be cleared in ptracestop(). procfs events
do not have the capability to discard the signal, so continue to clear
the mask in that case.
Reviewed by: jhb (initial revision)
MFC after: 1 week
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D9939
As we provide the disk size verification and correction via disk_ioctl
and disk state provided by disk_open(), we can not share the partition
state in disk_devdesc structure. Also the sharing does make a lot of sense
with ufs, as only one partition is open at any given time, but zfs pools
do keep the disk devices open.
To make sure we do get the correct information about the open device,
just remove the cache.
Reviewed by: allanjude, smh
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D9757
Support is implemented by mapping Linux's "struct net" into FreeBSD's
"struct vnet". Currently only vnet0 is supported by ibcore.
MFC after: 1 week
Sponsored by: Mellanox Technologies
Ignore them like it's done in the MADT parser. This allows booting on a box
with SRAT and APIC IDs > 255.
Reported by: Wei Liu <wei.liu2@citrix.com>
Tested by: Wei Liu <wei.liu2@citrix.com>
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: Citrix Systems R&D
Fix this by using more dynamic initialization with simpler ifdefs for
the machine dependencies. Find a frame buffer address in a more
portable way that at least compiles on sparc64.
This commit replaces calloc calls, which called calloc() as if it were
malloc() by allocating a multiple of objects as a sizeof multiplied by
the number of objects. The patch rectifies this by calling calloc() as
it was meant to be called.
This commit also replaces realloc() with reallocarray() in a similar
fashion as above. Instead of calculating the memory to reallocated
(changed) by multiplying sizeof by the number of objects, the sizeof
and number are passed as separate arguments to reallocarray(), letting
reallocarray() do the multiplication instead. Like the calloc()
adjustment above, this is approach is cleaner and more elegant than
than the previous code.
This has been tested on my production firewall and a laptop (also
running ipfilter).
Submitted by: pfg
MFC after: 6 weeks
I noticed after commit that kvm_dpcpu_setcpu was defined in the manpage.
Thus, the correct macro for the function reference is .Fn, not .Xr.
MFC after: 1 week
X-MFC with: r315363
Sponsored by: Dell EMC Isilon
Otherwise, recent Linux guests will use these instructions, resulting
in #UD exceptions since bhyve doesn't implement MONITOR/MWAIT exits.
This fixes boot-time hangs in recent Linux guests on Ryzen CPUs
(and probably Bulldozer aka AMD FX as well).
Reviewed by: kib
MFC after: 1 week
This is being done for the following reasons:
- kvm_open(3), etc says they will return NULL.
- NULL by definition is (void*)0 per POSIX, but can be redefined,
depending on the compiler, etc.
MFC after: 1 week
Sponsored by: Dell EMC Isilon
While there, parse u-boot provided command line arguments
for supported switches and update boothowto appropriately.
Also support setting kenv variables from the kernel comman
line.
PR: 216831 (modified)
Previously, the offset in a system call description specified the
array index of the start of a system call argument. For most system
call arguments this was the same as the index of the argument in the
function signature. 64-bit arguments (off_t and id_t values) passed
on 32-bit platforms use two slots in the array however. This was
handled by adding (QUAD_SLOTS - 1) to the slot indicies of any
subsequent arguments after a 64-bit argument (though written as ("{
Quad, 1 }, { Int, 1 + QUAD_SLOTS }" rather than "{ Quad, 1 }, { Int, 2
+ QUAD_SLOTS - 1 }"). If a system call contained multiple 64-bit
arguments (such as posix_fadvise()), then additional arguments would
need to use 'QUAD_SLOTS * 2' but remember to subtract 2 from the
initial number, etc. In addition, 32-bit powerpc requires 64-bit
arguments to be 64-bit aligned, so if the effective index in the array
of a 64-bit argument is odd, it needs QUAD_ALIGN added to the current
and any subsequent slots. However, if the effective index in the
array of a 64-bit argument was even, QUAD_ALIGN was omitted.
This approach was messy and error prone. This commit replaces it with
automated pre-processing of the system call table to do fixups for
64-bit argument offsets. The offset in a system call description now
indicates the index of an argument in the associated function call's
signature. A fixup function is run against each decoded system call
description during startup on 32-bit platforms. The fixup function
maintains an 'offset' value which holds an offset to be added to each
remaining system call argument's index. Initially offset is 0. When
a 64-bit system call argument is encountered, the offset is first
aligned to a 64-bit boundary (only on powerpc) and then incremented to
account for the second argument slot used by the argument. This
modified 'offset' is then applied to any remaining arguments. This
approach does require a few things that were not previously required:
1) Each system call description must now list arguments in ascending
order (existing ones all do) without using duplicate slots in the
register array. A new assert() should catch any future
descriptions which violate this rule.
2) A system call description is still permitted to omit arguments
(though none currently do), but if the call accepts 64-bit
arguments those cannot be omitted or incorrect results will be
displated on 32-bit systems.
Tested on: amd64 and i386
From the manpage:
When set to a nonempty string, prevents modifications of the PLT slots
when doing bindings. As result, each call of the PLT-resolved
function is resolved. In combination with debug output, this provides
complete account of all bind actions at runtime.
Same feature exists on Linux and Solaris.
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
The boot1.efi immediate issue from PR216964 is that we are reading into
too small buffer, from UEFI spec 2.6:
The size of the Buffer in bytes. This must be a multiple of the intrinsic block size of the device.
The secondary issue is that LBA calculation does not check reminder from
division.
This fix does check the provided buffer size and if we read less than
media sector size or the read offset is not aligned to sector boundary,
we allocate bounce buffer and perform the read by single sector.
PR: 216964
Reported by: Sergey Kozlov
Reviewed by: allanjude, Sergey Kozlov
Approved by: allanjude (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D9870
inpcb. t4_tom detaches the inpcb from the toepcb as soon as the
hardware is done with the connection (in final_cpl_received) but the
socket is around as long as the cm_id and the rest of iWARP state is.
This fixes an intermittent NULL dereference during abort.
Submitted by: KrishnamRaju ErapaRaju @ Chelsio
MFC after: 3 days
Sponsored by: Chelsio Communications
This patch fixes typo which results in extra bits of PMU control register.
PR: 217782
Submitted by: Svyatoslav <razmyslov at viva64.com>
Found by: PVS-Studio
uma_zcreate()'s alignment argument is supposed to be sizeof(foo) - 1,
and uma.h provides a set of helper macros for common types. Passing
sizeof(void *) results in all of the members being misaligned triggering
unaligned access faults on certain architectures (notably MIPS).
Reported by: brooks
Obtained from: CheriBSD
MFC after: 3 days
Sponsored by: DARPA / AFRL
- main(..): free memory assigned to fdsr before calling die(..).
- allowaddr(..): free memory assigned to ap before returning from the
function early. Add a `err` goto label to reduce freeaddrinfo/free(ap)
logic duplication.
MFC after: 1 week
X-MFC notes: some of this is dependent on refactoring not MFCed
Reported by: clang static analyzer, Coverity
CID: 1367750 (ap leakage in allowaddr(..))
Submitted by: Tom Rix <trix@juniper.net>
Reviewed by: ngie
Sponsored by: Dell EMC Isilon, Juniper
Differential Revision: D10004
This change contains several negative and positive tests for:
- cam_open_device
- cam_close_device
- cam_getccb
- cam_freeccb
This also contains a test for the failure case noted in bug 217649,
i.e., O_RDWR must be specified because pass(4) requires it.
This test unfortunately cannot assume that cam-capable devices are
present, so the user must explicitly provide a device via
`test_suites.FreeBSD.cam_test_device`. In the future, a test kernel
module might be shipped, or ctl(4) might be used, as a test device
when testing out libcam, which will allow the tests to do away with
having to specify an explicit test device.
Reviewed by: asomers, ken (earlier diff)
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: D9928
reviewing all uses of OFF_TO_IDX(), I observed that
vm_object_page_noreuse() is requiring an exclusive lock on the object
when, in fact, a shared lock suffices.
Reviewed by: kib, markj
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D10011
