and constants related to the BIOS Enhanced Disk Drive Specification.
- Use this header instead of magic numbers and various duplicate structure
definitions for doing I/O.
- Use an actual structure for the request to fetch drive parameters in
drvsize() rather than a gross hack of a char array with some magic
size. While here, change drvsize() to only pass the 1.1 version of
the structure and not request device path information. If we want
device path information you have to set the length of the device
path information as an input (along with probably checking the actual
EDD version to see which size one should use as the device path
information is variable-length). This fixes data smashing problems
from passing an EDD 3 structure to BIOSes supporting EDD 4.
Reviewed by: avg
Tested by: Dennis Koegel dk neveragain.de
MFC after: 1 week
- Decompress assembled gang block data if compressed.
- Verify checksum of a gang header.
- Verify checksum of assembled gang block data.
- Verify checksum of uber block.
Submitted by: avg
MFC after: 3 days
physical block size declared in bp may not always be what we want.
For example in case of gang block header physical block size declared
in bp is much larger than SPA_GANGBLOCKSIZE (512 bytes) and checksum
calculation failed. This bug could lead to accessing unallocated
memory and resets/failures during boot.
MFC after: 3 days
handled by lower layers like vdev_raidz, which uses bp for checksum
verification. This bug could lead to NULL pointer reference and resets
during boot.
MFC after: 3 days
- update xlp_machdep.c to read arguments from FDT if FDT support is
compiled in.
- define rmi_uart_bus_space, and use it as fdtbus_bs_tag
- update conf files for FDT support
- add default dts file xlp-basic.dts
gpt and zfs boot blocks are not nearly as size-constrained as boot2
from which they inherited their current optimization and anti-optimization
options. As such the current options do not provide any benefit, but
make debugging of the code much harder.
Also, it has been demonstrated that combination of -mrtd and
-fno-unit-at-a-time may result in mis-compilation of the boot code
with the current base gcc.
Additionally, intermediate assembly file filtering is removed for
zfsboot.
The new boot blocks are all compile- and boot- tested using qemu.
gptzfsboot is tested with real hardware.
Reported by: Peter Jeremy <peterjeremy@acm.org> [miscompilation]
Discussed with: bde, jhb
Tested by: Sebastian Chmielewski <chmielsster@gmail.com> [gptzfsboot]
Approved by: re (kib)
MFC after: 3 weeks
The utility is not connected to the build, so it should be safe
to update it.
To do: move the utility to tools/.
Some code is provided by Peter Jeremy <peterjeremy@acm.org>
Tested by: Sebastian Chmielewski <chmielsster@gmail.com>,
Peter Jeremy <peterjeremy@acm.org> (earlier versions)
Approved by: re (kib)
MFC after: 4 days
pre-r222417 state. The behavior was essentially reversed in r222417
which can cause confusion.
PR: 159775
Submitted by: Devin Teske
Approved by: re (kib)
default/loader.conf
This should help people installing ${OS} to USB devices, where there are
frequently cases where kernel tries to mount root before actual umass sensing
is finished.
Reviewed by: mav
Approved by: re (kib)
MFC after: 1 week
large (>= 10^10) numbers. In theory, 20 characaters should be enough,
but bump the buffer to 32 characters, so we have some room for the
future.
Reviewed by: pjd
Approved by: re (kib)
containing a kernel under /boot and that it's default value is "kernel"
not "/boot/kernel/kernel".
PR: docs/158992
Reported by: Wayne Mitchell wayne.mitchell.iz at gmail
Approved by: re (kib)
MFC after: 1 week
CFLAGS having '-g' in it, clang outputs several assembly directives that
are too new for our version of binutils.
Therefore, assemble the resulting .s files with clang instead. A more
general solution can be implemented when a GNU as-compatible driver for
clang's integrated assembler appears.
Reported by: dougb
we can find a way to get the information from petitboot or to guess it, so
the current algorithm is:
1. See if ps3disk3p1 (first GPT slice on OtherOS partition) exists, and if
so try to boot it.
2. Otherwise, netboot.
Submitted by: glevand <geoffrey.levand at mail dot ru >
bogusly casts its contents around causing alignment faults on sparc64 and
most likely also on at least powerpc. Fix this by copying the contents
bytewise instead as partly already done here. Solving this the right way
costs some space, i.e. 148 bytes with GCC and 16 bytes with clang on x86
there are still some bytes left there though, and an acceptable hack which
tricks the compiler into only using a 2-byte alignment instead of the native
one when accessing the contents turned out to even take up more space that.
the TLBs in order to get rid of the user mappings but instead traverse
them an flush only the latter like we also do for the Spitfire-class.
Also flushing the unlocked kernel entries can cause instant faults which
when called from within cpu_switch() are handled with the scheduler lock
held which in turn can cause timeouts on the acquisition of the lock by
other CPUs. This was easily seen with a 16-core V890 but occasionally
also happened with 2-way machines.
While at it, move the SPARC64-V support code entirely to zeus.c. This
causes a little bit of duplication but is less confusing than partially
using Cheetah-class bits for these.
- For SPARC64-V ensure that 4-Mbyte page entries are stored in the 1024-
entry, 2-way set associative TLB.
- In {d,i}tlb_get_data_sun4u() turn off the interrupts in order to ensure
that ASI_{D,I}TLB_DATA_ACCESS_REG actually are read twice back-to-back.
Tested by: Peter Jeremy (16-core US-IV), Michael Moll (2-way SPARC64-V)
floppies, so it will not be used as the start of an emulated floppy
image on a bootable CD which is what the fake BPB was used for.
- Only check that EDD packet mode is available once at the start of
zfsldr rather than for each disk sector now that we read data in one
sector at a time. As a result, collapse the remaining bits of read
up into nread and rename nread to read.
- Restore a return at the end of putstr that I removed in the previous
revision.
Tested by: Henri Hennebert (earlier version)
MFC after: 1 week
unhappy (probably they don't handle crossing the 64k boundary, etc.).
Fix this by changing zfsldr to use a loop reading from the disk one
sector at a time. To avoid trashing the saved copy of the MBR which is
used for disk I/O, read zfsboot2 at address 0x9000. This has the
advantage that BTX no longer needs to be relocated as it is read into
the correct location. However, the loop to relocate zfsboot2.bin can
now cross a 64k boundary, so change it to use relative segments instead.
(This will need further work if zfsboot2.bin ever exceeds 64k.)
While here, stop storing a relocated copy of zfsldr at 0x700. This was
only used by the xread hack which has recently been removed (and even
that use was dubious). Also, include the BIOS error code as hex when
reporting read errors to aid in debugging.
Much thanks to Henri Hennebert for patiently testing various iterations
of the patch as well as fixing the zfsboot2.bin relocation to use
relative segments.
MFC after: 1 week
Some of loader filesystems are very ill equipped to handle seeking
backwards within the file. Namely, tftp requires trasfer to be
restarted from the start of the file every time we go backwards.
Discussed on hackers and recommended for inclusion into 9.0 at the devsummit.
All support email to devin dteske at vicor dot ignoreme dot com .
Submitted by: dteske at vicor dot ignoreme dot com
Reviewed by: me and many others
Some files keep the SUN4V tags as a code reference, for the future,
if any rewamped sun4v support wants to be added again.
Reviewed by: marius
Tested by: sbruno
Approved by: re
boot2 calls back into boot1 to perform disk reads. The ZFS MBR boot blocks
do not have the same space constraints, so remove this hack for ZFS.
While here, remove commented out code to support C/H/S addressing from
zfsldr. The ZFS and GPT bootstraps always just use EDD LBA addressing.
MFC after: 2 weeks
- Mark getc() as inline, this has no effect on gcc but helps clang.
- Move getc() body before xgetc() so gcc does not emit a warning about
function having no body.
This modifies CFLAGS and tweaks sio.S to use the new calling convention.
The sio_init() and sio_putc() prototypes are modified so that other
users of this code know the correct calling convention.
This makes the code smaller when compiled with clang.
Reviewed by: jhb
Tested by: me and Freddie Cash <fjwcash gmail com>
to the l_load() method in the file_formats structure, while being passed
an address as an argument (dest). With file_load() calling arch_loadaddr()
now, this bug is a little bit more significant.
Spotted by: nyan@ (nice catch!)
boundaries. For good measure, align all other objects to cache
lines boundaries.
Use the new arch_loadseg I/F to keep track of kernel text and
data so that we can wire as much of it as is possible. It is
the responsibility of the kernel to link critical (read IVT
related) code and data at the front of the respective segment
so that it's covered by TRs before the kernel has a chance to
add more translations.
Use a better way of determining whether we're loading a legacy
kernel or not. We can't check for the presence of the PBVM page
table, because we may have unloaded that kernel and loaded an
older (legacy) kernel after that. Simply use the latest load
address for it.
1. arch_loadaddr - used by platform code to adjust the address at which
the object gets loaded. Implement PC98 using this new interface instead
of using conditional compilation. For ELF objects the ELF header is
passed as the data pointer. For raw files it's the filename. Note that
ELF objects are first considered as raw files.
2. arch_loadseg - used by platform code to keep track of actual segments,
so that (instruction) caches can be flushed or translations can be
created. Both the ELF header as well as the program header are passed
to allow platform code to treat the kernel proper differently from any
additional modules and to have all the relevant details of the loaded
segment (e.g. protection).
Add support for Pre-Boot Virtual Memory (PBVM) to the loader.
PBVM allows us to link the kernel at a fixed virtual address without
having to make any assumptions about the physical memory layout. On
the SGI Altix 350 for example, there's no usuable physical memory
below 192GB. Also, the PBVM allows us to control better where we're
going to physically load the kernel and its modules so that we can
make sure we load the kernel in memory that's close to the BSP.
The PBVM is managed by a simple page table. The minimum size of the
page table is 4KB (EFI page size) and the maximum is currently set
to 1MB. A page in the PBVM is 64KB, as that's the maximum alignment
one can specify in a linker script. The bottom line is that PBVM is
between 64KB and 8GB in size.
The loader maps the PBVM page table at a fixed virtual address and
using a single translations. The PBVM itself is also mapped using a
single translation for a maximum of 32MB.
While here, increase the heap in the EFI loader from 512KB to 2MB
and set the stage for supporting relocatable modules.
sizes are not supported.
o Map the PBVM page table.
o Map the PBVM using the largest possible power of 2 that is less than
the amount of PBVM used and round down to a valid page size. Note
that the current kernel is between 8MB and 16MB in size, which would
mean that 8MB would be the typical size of the mapping, if only 8MB
wasn't an invalid page size. In practice, we end up mapping the first
4MB of PBVM in most cases.
between kernel virtual address and physical address anymore. This so
that we can link the kernel at some virtual address without having
to worry whether the corresponding physical memory exists and is
available. The PBVM uses 64KB pages that are mapped to physical
addresses using a page table. The page table is at least 1 EFI page
in size, but can grow up to 1MB. This effectively gives us a memory
size between 32MB and 8GB -- i.e. enough to load a DVD image if one
wants to.
The loader assigns physical memory based on the EFI memory map and
makes sure that all physical memory is naturally aligned and a power
of 2. At this time there's no consideration for allocating physical
memory that is close to the BSP.
The kernel is informed about the physical address of the page table
and its size and can locate all PBVM pages through it.
The loader does not wire the PBVM page table yet. Instead it wires
all of the PBVM with a single translation. This is fine for now,
but a follow-up commit will fix it. We cannot handle more than 32MB
right now.
Note that the loader will map as much of the loaded kernel and
modules as possible, but it's up to the kernel to handle page faults
for references that aren't mapped. To make that easier, the page
table is mapped at a fixed virtual address.
o bunch of variables are turned into uint8_t
o initial setting of namep[] in lookup() is removed
as it's only overwritten a few lines down
o kname is explicitly initialized in main() as BSS
in boot2 is not zeroed
o the setting and reading of "fmt" in load() is removed
o buf in printf() is made static to save space
Reviewed by: jhb
Tested by: me and Fabian Keil <freebsd-listen fabiankeil de>
This patch shrinks boot2 a little.
o It switches kname to be just a pointer instead of an array.
o It changes ioctl to unsigned from uint8_t.
o It changes the second keyhit limit to 3 seconds from 5.
o It removes bi_basemem/bi_extmem/bi_memsizes_valid setting.
o It switches kname to be just a pointer instead of an array
thus avoiding a couple of memcpy()s.
o It changes ioctl to unsigned from uint8_t.
o It changes the second keyhit limit to 3 seconds from 5
so that constant propagation can take place.
o It changes the ticks overflow computation as suggested by bde@.
o It removes bi_basemem/bi_extmem/bi_memsizes_valid setting from
bootinfo as it is unused.
Reviewed by: jhb
Few new things available from now on:
- Data deduplication.
- Triple parity RAIDZ (RAIDZ3).
- zfs diff.
- zpool split.
- Snapshot holds.
- zpool import -F. Allows to rewind corrupted pool to earlier
transaction group.
- Possibility to import pool in read-only mode.
MFC after: 1 month
It used to choke on the notation "inb (%dx),%al" for "inb %dx,%al"; GNU
as accepts both forms. Which notation is more 'correct' is an open
question. :)
In sys/boot/i386/boot2/boot2.c, change the type of the 'opts' variable
from uint16_t back to uint32_t. The actual option bitmasks (RB_* and
RBX_*) assume at least a 32 bit variable.
Submitted by: rdivacky
x86 CPU support, better support for powerpc64, some new directives, and
many other things. Bump __FreeBSD_version, and add a note to UPDATING.
Thanks to the many people that have helped to test this.
Obtained from: projects/binutils-2.17
on space for clang and a.out support is only needed for /boot/loader,
they are excess bytes that serve no useful purpose other than to
support really old kernels (FreeBSD < 3.2 or so). Prefer clang
support over support for these old kernels and remove this code. We
gain about 100 bytes of space this way.
Reviewed by: rdivacky@
little further. This gets us further on the way to be able to build it
successfully with clang. Using in-tree gcc, this shrinks boot2.bin with
60 bytes, the in-tree clang shaves off 72 bytes, and ToT clang 84 bytes.
Submitted by: rdivacky
Reviewed by: imp
available on firmwares 3.15 and earlier.
Caveats: Support for the internal SATA controller is currently missing,
as is support for framebuffer resolutions other than 720x480. These
deficiencies will be remedied soon.
Special thanks to Peter Grehan for providing the hardware that made this
port possible, and thanks to Geoff Levand of Sony Computer Entertainment
for advice on the LV1 hypervisor.
The controller is commonly found on DM&P Vortex86 x86 SoC. The
driver supports all hardware features except flow control. The
flow control was intentionally disabled due to silicon bug.
DM&P Electronics, Inc. provided all necessary information including
sample board to write driver and answered many questions I had.
Many thanks for their support of FreeBSD.
H/W donated by: DM&P Electronics, Inc.
much space as needed for the mode buffer. Use strcmp, relying on OF giving
back NULL terminated strings.
Submitted by: marius
Approved by: nwhitehorn (mentor)
virtual mode. In virtual mode we have to do memory mapping. On PowerMacs it is
usually false while on pSeries we have found that it is true. The real-mode?
property is not available on sparc64.
Approved by: nwhitehorn (mentor)
BIOS does not support ACPI. The other options in the menu retain their
existing numbers, option 2 is simply blanked out (and '2' is ignored).
MFC after: 1 month
This is the same change that was made in rev 1.33 of boot/i386/btx/btx/btx.S
PR: i386/91871
Submitted by: Bjorn Konig <bkoenig at cs.tu-berlin.de>
MFC after: 1 week
to move the .IA_64.unwind and .IA_64.unwind_info input sections into
separate output sections.
Otherwise ld will complain about it (".data has both ordered
[`.IA_64.unwind'] and unordered [`.IA_64.unwind_info'] sections").
This makes ia64 buildworld run to full completion.
was incorrect as further down the road cons_probe() calls malloc() so the
former can't be called before init_heap() has succeed. Instead just exit
to the firmware in case init_heap() fails like OF_init() does when hitting
a problem as we're then likely running in a very broken environment where
hardly anything can be trusted to work.
