Mave the grant table code into the dev/xen folder in preparation for turning
it into a device using the newbus interface. This is just code motion, no
functional changes.
Sponsored by: Citrix Systems R&D
_p and _w are adjusted to account for the partial write (if any).
However, _p and _w should not be unconditionally adjusted and should only
be changed when we actually wrote some bytes, or the accumulated accounting
error will eventually result in a heap buffer overflow.
Reported by: adrian and alfred (Norse Corporation)
Security: FreeBSD-SA-14:27.stdio
Security: CVE-2014-8611
can't do a timeout bigger than 15 seconds. The code wasn't checking for
this and because bitmasking was involved the requested timeout was
basically adjusted modulo-16. That led to things like a 128 second
timeout actually being a 9 second timeout, which accidentally worked fine
until watchdogd was changed to only pet the dog once every 10 seconds.
When running as a Xen PVH Dom0 we need to add custom buses that override
some of the functionality present in the ACPI PCI Bus and the PCI Bus. We
currently override the ACPI PCI Bus, but not the PCI Bus, so add a new
override for the PCI Bus and share the generic functions between them.
Reported by: David P. Discher <dpd@dpdtech.com>
Sponsored by: Citrix Systems R&D
conf/files.amd64:
- Add the new files.
x86/xen/xen_pci_bus.c:
- Generic file that contains the PCI overrides so they can be used by the
several PCI specific buses.
xen/xen_pci.h:
- Prototypes for the generic overried functions.
dev/xen/pci/xen_pci.c:
- Xen specific override for the PCI bus.
dev/xen/pci/xen_acpi_pci.c:
- Xen specific override for the ACPI PCI bus.
o Move similar block/networking methods to common file
o Follow r275640 and correct MMIO registers width
o Pass value to MMIO platform_note method.
Sponsored by: DARPA, AFRL
Overrunning buffer pointed to by (caddr_t)&oip->i_db[0] of 48 bytes by
passing it to a function which accesses it at byte offset 59 using
argument 60UL.
The issue was inherited from an older FFS implementation and
fixed there with by merging UFS2 in r98542. We follow the
FFS fix.
Discussed with: bde
CID: 1007665
MFC after: 3 days
If the SCI is remapped to a non-ISA global interrupt notify the ACPI
subsystem about the override.
Reported by: David P. Discher <dpd@dpdtech.com>
Sponsored by: Citrix Systems R&D
There are two main parts to get it to work, 1) most of the register
accesses need to be word sized, other than the config register which
needs to be byte aligned, and 2) we don't need the platform driver
for this to work on the Foundation Model, allow it to be NULL.
Differential Revision: https://reviews.freebsd.org/D1240
Reviewed by: bryanv
Sponsored by: The FreeBSD Foundation
Since VFS does not/cannot stop writes, sync might run indefinitely, or
be a wrong thing to do at all. E. g. NFS ignores VFS_SYNC() for
forced unmounts, since non-responding server does not allow sync to
finish. On the other hand, filesystems can and do stop writes using
fs-specific facilities, and should already fully flush caches in
VFS_UNMOUNT() due to the race.
Adjust msdosfs tp sync in unmount for forced call, to accomodate the
new behaviour. Note that it is still racy, since writes are not
stopped.
Discussed with: avg, bjk, mckusick
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
This will fix installation with differing host targets in installworld, so
one can build i386/i386 on an amd64 host, then install to an i386/i386 target
Reported by: alfred
Phabric: D1280
MFC after: 1 week
to be called before suspension and after resume, correspondingly. The
syncer_suspend() ensures that all filesystems dirty data and metadata
are saved to the permanent storage, and stops kernel threads which
might modify filesystems. The syncer_resume() restores stopped
threads.
For now, only syncer is stopped. This is needed, because each sync
loop causes superblock updates for UFS.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
the vnode owning the buffer is not locked. More, it cannot be locked
safely, since getnewbuf_reuse_bp() is called from newbuf(), and some
other vnode is already locked, for which reused buffer will be
reassigned.
As the consequence, reclamation of the owning vnode could go in
parallel, in particular, the call to vnode_destroy_vobject(), which
deallocates the vm object and zeroes the v_bufobj->bo_object. Note
that the pages wired by the buffer are left wired and can be safely
freed by the vfs_vmio_release() without the need for the vm object
lock. Also, seeing stale pointer to the v_object is safe due to vm
object type stability.
Check for bo_bufobj != NULL and cache the value in local variable to
avoid trying to lock NULL vm object.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This is not correct at least for the stop requests. Check for stop
conditions and suspend threads if requested.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
preparation for the global stop commit.
Move the code to weed suspended or sleeping threads into the
appropriate state, into the helper weed_inhib(). Current code already
has deep nesting and hard to follow [1].
Add currently useless helper remain_for_mode(), which returns the
count of threads which are allowed to run, according to the
single-threading mode.
In thread_single_end(), do not save curthread into local variable, it
is unused after, except to find curproc.
Remove stray empty line.
Requested by: avg [1]
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
for the suspension.
Currently, the loop performs uninterruptible cv_wait(9) call, which
prevents suspension until child allows further execution of parent.
If child is stopped, suspension or single-threading is delayed
indefinitely.
Create a helper thread_suspend_check_needed() to identify the need for
a call to thread_suspend_check(). It is required since call to the
thread_suspend_check() cannot be safely done while owning the child
(p2) process lock. Only when suspension is needed, drop p2 lock and
call thread_suspend_check(). Perform wait for cv with timeout, in
case suspend is requested after wait started; I do not see a better
way to interrupt the wait.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
multithreaded status of the process.
The stopped state must be cleared before P_WEXIT is set. A stop
signal delivered just before first PROC_LOCK() block in exit1(9) would
put the process into pending stop with P_WEXIT set or assertion
triggered. Also recheck for the suspension after failed
thread_single(9) call, since process lock could be dropped.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Introduce strtolinenum to properly check line numbers while parsing:
no signs, no spaces, just digits, 0 <= x <= LONG_MAX
Properly validate line ranges supplied in diff file to prevent overflows.
Also fixes an out of boundary memory access because the resulting values
are used as array indices.
PR: 195436
Obtained from: OpenBSD (CVS pch.c rev 1.45, 1,46, common.h rev 1.28)
MFC after: 1 week
This will unbreak the build when "env MK_CXX=no make delete-old" has been run
on the build host post-r272849
Tested with the following commands:
/bin/sh
export __MAKE_CONF=/dev/null SRCCONF=/dev/null
export MK_CLANG=no MK_CLANG_BOOTSTRAP=no MK_GCC=yes MK_GCC_BOOTSTRAP=yes
export MK_GNUCXX=yes TARGET=armv6 TARGET_ARCH=arm make xdev
make toolchain
make xdev-build
sudo -E make xdev-install
/usr/armv6-freebsd/usr/bin/cc -dumpmachine | grep arm
X-MFC with: r272849
Reported by: Dan Raymond <draymond@foxvalley.net>, gjb
if/when MK_CXX == no and make delete-old has been run on the build host,
post-r272849
Tested with the following command:
% sudo env MK_CLANG=no MK_CLANG_BOOTSTRAP=no MK_GCC=yes MK_GCC_BOOTSTRAP=yes \
MK_GNUCXX=yes make xdev
Without this fix, a kernel with VIMAGE + Infiniband will panic on bootup.
Certain necessary #include statements require LIST_HEAD.
Add these includes to ofed/include/linux/list.h, because
LIST_HEAD is specifically overridden in this file.
PR: 191468
Differential Revision: D1279
Reviewed by: hselasky
When importing a pool, don't assume that the passed pool configuration
at vdev_load is always vaild. It's possible that a stale configuration
that comes with extra vdevs, where metaslab_init() would fail because
of lower layer returns error.
Change the code to make metaslab_init() handle and return errors from
lower layer and pass it back to upper layer and handle it there.
Illumos issue:
5213 panic in metaslab_init due to space_map_open returning ENXIO
MFC after: 2 weeks
number of races which could cause double frees or use-after-frees when
performing DAD on an address. In particular, an IPv6 address can now only be
marked as a duplicate from the DAD callout.
Differential Revision: https://reviews.freebsd.org/D1258
Reviewed by: ae, hrs
Reported by: rstone
MFC after: 1 month
