should be set to VM_PAGE_BITS_ALL before returning, to ensure that
neither vm_pager_get_pages nor vm_fault calls vm_page_zero_invalid
after dev_pager_getpages has returned.
Submitted by: tegge
so that they know whether the allocation is supposed to be able to sleep
or not.
* Allow uma_zone constructors and initialation functions to return either
success or error. Almost all of the ones in the tree currently return
success unconditionally, but mbuf is a notable exception: the packet
zone constructor wants to be able to fail if it cannot suballocate an
mbuf cluster, and the mbuf allocators want to be able to fail in general
in a MAC kernel if the MAC mbuf initializer fails. This fixes the
panics people are seeing when they run out of memory for mbuf clusters.
* Allow debug.nosleepwithlocks on WITNESS to be disabled, without changing
the default.
Both bmilekic and jeff have reviewed the changes made to make failable
zone allocations work.
those architectures without pmap locking.
- Eliminate the acquisition and release of Giant from vm_map_protect().
(Translation: mprotect(2) runs to completion without touching Giant on
alpha, amd64, i386 and ia64.)
maps. We always acquire the sx lock exclusively here, but we can't
use a mutex because we want to be able to sleep while holding the
lock. This is completely equivalent to what we were doing with the
lockmgr(9) locks before.
Approved by: alc
- Enable recursion on the page queues lock. This allows calls to
vm_page_alloc(VM_ALLOC_NORMAL) and UMA's obj_alloc() with the page
queues lock held. Such calls are made to allocate page table pages
and pv entries.
- The previous change enables a partial reversion of vm/vm_page.c
revision 1.216, i.e., the call to vm_page_alloc() by vm_page_cowfault()
now specifies VM_ALLOC_NORMAL rather than VM_ALLOC_INTERRUPT.
- Add partial locking to pmap_copy(). (As a side-effect, pmap_copy()
should now be faster on i386 SMP because it no longer generates IPIs
for TLB shootdown on the other processors.)
- Complete the locking of pmap_enter() and pmap_enter_quick(). (As of now,
all changes to a user-level pmap on alpha, amd64, and i386 are performed
with appropriate locking.)
- zone_large_init() stays pretty much the same.
- zone_small_init() will try to stash the slab header in the slab page
being allocated if the amount of calculated wasted space is less
than UMA_MAX_WASTE (for both the UMA_ZONE_REFCNT case and regular
case). If the amount of wasted space is >= UMA_MAX_WASTE, then
UMA_ZONE_OFFPAGE will be set and the slab header will be allocated
separately for better use of space.
- uma_startup() calculates the maximum ipers required in offpage slabs
(so that the offpage slab header zone(s) can be sized accordingly).
The algorithm used to calculate this replaces the old calculation
(which only happened to work coincidentally). We now iterate over
possible object sizes, starting from the smallest one, until we
determine that wastedspace calculated in zone_small_init() might
end up being greater than UMA_MAX_WASTE, at which point we use the
found object size to compute the maximum possible ipers. The
reason this works is because:
- wastedspace versus objectsize is a see-saw function with
local minima all equal to zero and local maxima growing
directly proportioned to objectsize. This implies that
for objects up to or equal a certain objectsize, the see-saw
remains entirely below UMA_MAX_WASTE, so for those objectsizes
it is impossible to ever go OFFPAGE for slab headers.
- ipers (items-per-slab) versus objectsize is an inversely
proportional function which falls off very quickly (very large
for small objectsizes).
- To determine the maximum ipers we'll ever need from OFFPAGE
slab headers we first find the largest objectsize for which
we are guaranteed to not go offpage for and use it to compute
ipers (as though we were offpage). Since the only objectsizes
allowed to go offpage are bigger than the found objectsize,
and since ipers vs objectsize is inversely proportional (and
monotonically decreasing), then we are guaranteed that the
ipers computed is always >= what we will ever need in offpage
slab headers.
- Define UMA_FRITM_SZ and UMA_FRITMREF_SZ to be the actual (possibly
padded) size of each freelist index so that offset calculations are
fixed.
This might fix weird data corruption problems and certainly allows
ARM to now boot to at least single-user (via simulator).
Tested on i386 UP by me.
Tested on sparc64 SMP by fenner.
Tested on ARM simulator to single-user by cognet.
vm/vm_object.c revision 1.88) and vm_object_sync() (originating in
vm/vm_map.c revision 1.36): When descending a chain of backing objects,
both use the wrong object's backing offset. Consequently, both may
operate on the wrong pages.
Quoting Matt, "This could be responsible for all of the sporatic madvise
oddness that has been reported over the years."
Reviewed by: Matt Dillon
- Push down Giant into shmexit(). (Giant is acquired only if the vmspace
contains shm segments.)
- Eliminate the acquisition of Giant from proc_rwmem().
- Reduce the scope of Giant in exit1(), uncovering the destruction of the
address space.
vmspace to the new vmspace in vmspace_exec() is mostly wasted effort. With
one exception, vm_swrss, the copied fields are immediately overwritten.
Instead, initialize these fields to zero in vmspace_alloc(), eliminating a
bcopy() from vmspace_exec() and a bzero() from vmspace_fork().
kmem_alloc_pageable(). The difference between these is that an errant
memory access to the zone will be detected sooner with
kmem_alloc_nofault().
The following changes serve to eliminate the following lock-order
reversal reported by witness:
1st 0xc1a3c084 vm object (vm object) @ vm/swap_pager.c:1311
2nd 0xc07acb00 swap_pager swhash (swap_pager swhash) @ vm/swap_pager.c:1797
3rd 0xc1804bdc vm object (vm object) @ vm/uma_core.c:931
There is no potential deadlock in this case. However, witness is unable
to recognize this because vm objects used by UMA have the same type as
ordinary vm objects. To remedy this, we make the following changes:
- Add a mutex type argument to VM_OBJECT_LOCK_INIT().
- Use the mutex type argument to assign distinct types to special
vm objects such as the kernel object, kmem object, and UMA objects.
- Define a static swap zone object for use by UMA. (Only static
objects are assigned a special mutex type.)
being incomplete, it currently has to know how to drop and pick back
up the vm_object's mutex if it has to sleep and drop the page queue
mutex. The problem with this is that if the page is busy, while we
are sleeping, the page can be freed and object disappear. When trying
to lock m->object, we'd get a stale or NULL pointer and crash.
The object is now cached, but this makes the assumption that
the object is referenced in some manner and will not itself
disappear while it is unlocked. Since this only happens if
the object is locked, I had to remove an assumption earlier in
contigmalloc() that reversed the order of locking the object and
doing vm_page_sleep_if_busy(), not the normal order.
init and fini handlers. Our vm system removes all userland mappings at
exit prior to calling pmap_release. It just so happens that we might
as well reuse the pmap for the next process since the userland slate
has already been wiped clean.
However. There is a functional benefit to this as well. For platforms
that share userland and kernel context in the same pmap, it means that
the kernel portion of a pmap remains valid after the vmspace has been
freed (process exit) and while it is in uma's cache. This is significant
for i386 SMP systems with kernel context borrowing because it avoids
a LOT of IPIs from the pmap_lazyfix() cleanup in the usual case.
Tested on: amd64, i386, sparc64, alpha
Glanced at by: alc
allocated as "no object" pages. Similar changes were made to the amd64
and i386 pmap last year. The primary reason being that maintaining
a pte object leads to lock order violations. A secondary reason being
that the pte object is redundant, i.e., the page table itself can be
used to lookup page table pages. (Historical note: The pte object
predates our ability to allocate "no object" pages. Thus, the pte
object was a necessary evil.)
- Unconditionally check the vm object lock's status in vm_page_remove().
Previously, this assertion could not be made on Alpha due to its use
of a pte object.
improved chance of working despite pressure from running programs.
Instead of trying to throw a bunch of pages out to swap and hope for
the best, only a range that can potentially fulfill contigmalloc(9)'s
request will have its contents paged out (potentially, not forcibly)
at a time.
The new contigmalloc operation still operates in three passes, but it
could potentially be tuned to more or less. The first pass only looks
at pages in the cache and free pages, so they would be thrown out
without having to block. If this is not enough, the subsequent passes
page out any unwired memory. To combat memory pressure refragmenting
the section of memory being laundered, each page is removed from the
systems' free memory queue once it has been freed so that blocking
later doesn't cause the memory laundered so far to get reallocated.
The page-out operations are now blocking, as it would make little sense
to try to push out a page, then get its status immediately afterward
to remove it from the available free pages queue, if it's unlikely to
have been freed. Another change is that if KVA allocation fails, the
allocated memory segment will be freed and not leaked.
There is a sysctl/tunable, defaulting to on, which causes the old
contigmalloc() algorithm to be used. Nonetheless, I have been using
vm.old_contigmalloc=0 for over a month. It is safe to switch at
run-time to see the difference it makes.
A new interface has been used which does not require mapping the
allocated pages into KVA: vm_page.h functions vm_page_alloc_contig()
and vm_page_release_contig(). These are what vm.old_contigmalloc=0
uses internally, so the sysctl/tunable does not affect their operation.
When using the contigmalloc(9) and contigfree(9) interfaces, memory
is now tracked with malloc(9) stats. Several functions have been
exported from kern_malloc.c to allow other subsystems to use these
statistics, as well. This invalidates the BUGS section of the
contigmalloc(9) manpage.
pmap_protect() and pmap_remove(). In general, they require the lock in
order to modify a page's pv list or flags. In some cases, however,
pmap_protect() can avoid acquiring the lock.
and WITNESS is not built, then force all M_WAITOK allocations to
M_NOWAIT behavior (transparently). This is to be used temporarily
if wierd deadlocks are reported because we still have code paths
that perform M_WAITOK allocations with lock(s) held, which can
lead to deadlock. If WITNESS is compiled, then the sysctl is ignored
and we ask witness to tell us wether we have locks held, converting
to M_NOWAIT behavior only if it tells us that we do.
Note this removes the previous mbuf.h inclusion as well (only needed
by last revision), and cleans up unneeded [artificial] comparisons
to just the mbuf zones. The problem described above has nothing to
do with previous mbuf wait behavior; it is a general problem.
zones, and do it by direct comparison of uma_zone_t instead of strcmp.
The mbuf subsystem used to provide M_TRYWAIT/M_DONTWAIT semantics, but
this is mostly no longer the case. M_WAITOK has taken over the spot
M_TRYWAIT used to have, and for mbuf things, still may return NULL if
the code path is incorrectly holding a mutex going into mbuf allocation
functions.
The M_WAITOK/M_NOWAIT semantics are absolute; though it may deadlock
the system to try to malloc or uma_zalloc something with a mutex held
and M_WAITOK specified, it is absolutely required to not return NULL
and will result in instability and/or security breaches otherwise.
There is still room to add the WITNESS_WARN() to all cases so that
we are notified of the possibility of deadlocks, but it cannot change
the value of the "badness" variable and allow allocation to actually
fail except for the specialized cases which used to be M_TRYWAIT.
to failing -- that is, allocations via malloc(M_WAITOK) that are required
to never fail -- if WITNESS is not defined. While everyone should be
running WITNESS, in any case, zone "Mbuf" allocations are really the only
ones that should be screwed with by this hack.
This hack is crashing people, and would continue to do so with or without
WITNESS. Things shouldn't be allocating with M_WAITOK with locks held,
but it's not okay just to always remove M_WAITOK when !WITNESS.
Reported by: Bernd Walter <ticso@cicely5.cicely.de>
than as one-off hacks in various other parts of the kernel:
- Add a function maybe_preempt() that is called from sched_add() to
determine if a thread about to be added to a run queue should be
preempted to directly. If it is not safe to preempt or if the new
thread does not have a high enough priority, then the function returns
false and sched_add() adds the thread to the run queue. If the thread
should be preempted to but the current thread is in a nested critical
section, then the flag TDF_OWEPREEMPT is set and the thread is added
to the run queue. Otherwise, mi_switch() is called immediately and the
thread is never added to the run queue since it is switch to directly.
When exiting an outermost critical section, if TDF_OWEPREEMPT is set,
then clear it and call mi_switch() to perform the deferred preemption.
- Remove explicit preemption from ithread_schedule() as calling
setrunqueue() now does all the correct work. This also removes the
do_switch argument from ithread_schedule().
- Do not use the manual preemption code in mtx_unlock if the architecture
supports native preemption.
- Don't call mi_switch() in a loop during shutdown to give ithreads a
chance to run if the architecture supports native preemption since
the ithreads will just preempt DELAY().
- Don't call mi_switch() from the page zeroing idle thread for
architectures that support native preemption as it is unnecessary.
- Native preemption is enabled on the same archs that supported ithread
preemption, namely alpha, i386, and amd64.
This change should largely be a NOP for the default case as committed
except that we will do fewer context switches in a few cases and will
avoid the run queues completely when preempting.
Approved by: scottl (with his re@ hat)
switch to. If a non-NULL thread pointer is passed in, then the CPU will
switch to that thread directly rather than calling choosethread() to pick
a thread to choose to.
- Make sched_switch() aware of idle threads and know to do
TD_SET_CAN_RUN() instead of sticking them on the run queue rather than
requiring all callers of mi_switch() to know to do this if they can be
called from an idlethread.
- Move constants for arguments to mi_switch() and thread_single() out of
the middle of the function prototypes and up above into their own
section.
Just use p2->p_uarea directly instead.
- Remove an old and mostly bogus assertion regarding p2->p_sigacts.
- Use RANGEOF macro ala fork1() to clean up bzero/bcopy of p_stats.
vm objects shadowing source in vm_object_shadow(). This closes a race where
vm_object_collapse() could be called with a partially uninitialized object
argument causing symptoms that looked like hardware problems, e.g. signal 6,
10, 11 or a /bin/sh busy-waiting for a nonexistant child process.
when not propogated on fork (due to minherit(2)). Consistency checks
otherwise fail when the vm_map is freed and it appears to have not been
emptied completely, causing an INVARIANTS panic in vm_map_zdtor().
PR: kern/68017
Submitted by: Mark W. Krentel <krentel@dreamscape.com>
Reviewed by: alc
The general UMA lock is a recursion-allowed lock because
there is a code path where, while we're still configured
to use startup_alloc() for backend page allocations, we
may end up in uma_reclaim() which calls zone_foreach(zone_drain),
which grabs uma_mtx, only to later call into startup_alloc()
because while freeing we needed to allocate a bucket. Since
startup_alloc() also takes uma_mtx, we need to be able to
recurse on it.
This exact explanation also added as comment above mtx_init().
Trace showing recursion reported by: Peter Holm <peter-at-holm.cc>
case of NFS mounted swap, so do not try to dereference it.
While we're here, brucify the printf() call which happens when we
time out on acquisition of vm_page_queue_mtx.
PR: kern/67898
Submitted by: bde (style)
The big lines are:
NODEV -> NULL
NOUDEV -> NODEV
udev_t -> dev_t
udev2dev() -> findcdev()
Various minor adjustments including handling of userland access to kernel
space struct cdev etc.
1. Remove a race whereby contigmalloc() would deadlock against the
running processes in the system if they kept reinstantiating
the memory on the active and inactive page queues that it was
trying to flush out. The process doing the contigmalloc() would
sit in "swwrt" forever and the swap pager would be going at full
force, but never get anywhere. Instead of doing it until the
queues are empty, launder for as many iterations as there are
pages in the queue.
2. Do all laundering to swap synchronously; previously, the vnode
laundering was synchronous and the swap laundering not.
3. Increase the number of launder-or-allocate passes to three, from
two, while failing without bothering to do all the laundering on
the third pass if allocation was not possible. This effectively
gives exactly two chances to launder enough contiguous memory,
helpful with high memory churn where a lot of memory from one pass
to the next (and during a single laundering loop) becomes dirtied
again.
I can now reliably hot-plug hardware requiring a 256KB contigmalloc()
without having the kldload/cbb ithread sit around failing to make
progress, while running a busy X session. Previously, it took killing
X to get contigmalloc() to get further (that is, quiescing the system),
and even then contigmalloc() returned failure.
internal reference counters, UMA_ZONE_NOFREE. This way, those slabs
(with their ref counts) will be effectively type-stable, then using
a trick like this on the refcount is no longer dangerous:
MEXT_REM_REF(m);
if (atomic_cmpset_int(m->m_ext.ref_cnt, 0, 1)) {
if (m->m_ext.ext_type == EXT_PACKET) {
uma_zfree(zone_pack, m);
return;
} else if (m->m_ext.ext_type == EXT_CLUSTER) {
uma_zfree(zone_clust, m->m_ext.ext_buf);
m->m_ext.ext_buf = NULL;
} else {
(*(m->m_ext.ext_free))(m->m_ext.ext_buf,
m->m_ext.ext_args);
if (m->m_ext.ext_type != EXT_EXTREF)
free(m->m_ext.ref_cnt, M_MBUF);
}
}
uma_zfree(zone_mbuf, m);
Previously, a second thread hitting the above cmpset might
actually read the refcnt AFTER it has already been freed. A very
rare occurance. Now we'll know that it won't be freed, though.
Spotted by: julian, pjd
It doesn't take 'align' and 'flags' but 'master' instead, which is
a reference to the Master Zone, containing the backing Keg.
Pointed out by: Tim Robbins (tjr)
mbuma is an Mbuf & Cluster allocator built on top of a number of
extensions to the UMA framework, all included herein.
Extensions to UMA worth noting:
- Better layering between slab <-> zone caches; introduce
Keg structure which splits off slab cache away from the
zone structure and allows multiple zones to be stacked
on top of a single Keg (single type of slab cache);
perhaps we should look into defining a subset API on
top of the Keg for special use by malloc(9),
for example.
- UMA_ZONE_REFCNT zones can now be added, and reference
counters automagically allocated for them within the end
of the associated slab structures. uma_find_refcnt()
does a kextract to fetch the slab struct reference from
the underlying page, and lookup the corresponding refcnt.
mbuma things worth noting:
- integrates mbuf & cluster allocations with extended UMA
and provides caches for commonly-allocated items; defines
several zones (two primary, one secondary) and two kegs.
- change up certain code paths that always used to do:
m_get() + m_clget() to instead just use m_getcl() and
try to take advantage of the newly defined secondary
Packet zone.
- netstat(1) and systat(1) quickly hacked up to do basic
stat reporting but additional stats work needs to be
done once some other details within UMA have been taken
care of and it becomes clearer to how stats will work
within the modified framework.
From the user perspective, one implication is that the
NMBCLUSTERS compile-time option is no longer used. The
maximum number of clusters is still capped off according
to maxusers, but it can be made unlimited by setting
the kern.ipc.nmbclusters boot-time tunable to zero.
Work should be done to write an appropriate sysctl
handler allowing dynamic tuning of kern.ipc.nmbclusters
at runtime.
Additional things worth noting/known issues (READ):
- One report of 'ips' (ServeRAID) driver acting really
slow in conjunction with mbuma. Need more data.
Latest report is that ips is equally sucking with
and without mbuma.
- Giant leak in NFS code sometimes occurs, can't
reproduce but currently analyzing; brueffer is
able to reproduce but THIS IS NOT an mbuma-specific
problem and currently occurs even WITHOUT mbuma.
- Issues in network locking: there is at least one
code path in the rip code where one or more locks
are acquired and we end up in m_prepend() with
M_WAITOK, which causes WITNESS to whine from within
UMA. Current temporary solution: force all UMA
allocations to be M_NOWAIT from within UMA for now
to avoid deadlocks unless WITNESS is defined and we
can determine with certainty that we're not holding
any locks when we're M_WAITOK.
- I've seen at least one weird socketbuffer empty-but-
mbuf-still-attached panic. I don't believe this
to be related to mbuma but please keep your eyes
open, turn on debugging, and capture crash dumps.
This change removes more code than it adds.
A paper is available detailing the change and considering
various performance issues, it was presented at BSDCan2004:
http://www.unixdaemons.com/~bmilekic/netbuf_bmilekic.pdf
Please read the paper for Future Work and implementation
details, as well as credits.
Testing and Debugging:
rwatson,
brueffer,
Ketrien I. Saihr-Kesenchedra,
...
Reviewed by: Lots of people (for different parts)
long time, i.e., since the cleanup of the VM Page-queues code done two
years ago.
Reviewed by: Alan Cox <alc at freebsd.org>,
Matthew Dillon <dillon at backplane.com>
1. Contrary to the Single Unix Specification our implementation of
munlock(2) when performed on an unwired virtual address range has
returned an error. Correct this. Note, however, that the behavior
of "system" unwiring is unchanged, only "user" unwiring is changed.
If "system" unwiring is performed on an unwired virtual address
range, an error is still returned.
2. Performing an errant "system" unwiring on a virtual address range
that was "user" (i.e., mlock(2)) but not "system" wired would
incorrectly undo the "user" wiring instead of returning an error.
Correct this.
Discussed with: green@
Reviewed by: tegge@
being that PHYS_TO_VM_PAGE() returns the wrong vm_page for fictitious
pages but unwiring uses PHYS_TO_VM_PAGE(). The resulting panic
reported an unexpected wired count. Rather than attempting to fix
PHYS_TO_VM_PAGE(), this fix takes advantage of the properties of
fictitious pages. Specifically, fictitious pages will never be
completely unwired. Therefore, we can keep a fictitious page's wired
count forever set to one and thereby avoid the use of
PHYS_TO_VM_PAGE() when we know that we're working with a fictitious
page, just not which one.
In collaboration with: green@, tegge@
PR: kern/29915
Some of the conditions that caused vm_page_select_cache() to deactivate a
page were wrong. For example, deactivating an unmanaged or wired page is a
nop. Thus, if vm_page_select_cache() had ever encountered an unmanaged or
wired page, it would have looped forever. Now, we assert that the page is
neither unmanaged nor wired.
Previously, mlockall(2) usage would leak MAP_FUTUREWIRE of the process's
vmspace::vm_map and subsequent processes would wire all of their memory.
Coupled with a wired-page leak in vm_fault_unwire(), this would run the
system out of free pages and cause programs to randomly SIGBUS when
faulting in new pages.
(Note that this is not the fix for the latter part; pages are still
leaked when a wired area is unmapped in some cases.)
Reviewed by: alc
PR kern/62930
allocation and deallocation. This flag's principal use is shortly after
allocation. For such cases, clearing the flag is pointless. The only
unusual use of PG_ZERO is in vfs_bio_clrbuf(). However, allocbuf() never
requests a prezeroed page. So, vfs_bio_clrbuf() never sees a prezeroed
page.
Reviewed by: tegge@
caller to vm_page_grab(). Although this gives VM_ALLOC_ZERO a
different meaning for vm_page_grab() than for vm_page_alloc(), I feel
such change is necessary to accomplish other goals. Specifically, I
want to make the PG_ZERO flag immutable between the time it is
allocated by vm_page_alloc() and freed by vm_page_free() or
vm_page_free_zero() to avoid locking overheads. Once we gave up on
the ability to automatically recognize a zeroed page upon entry to
vm_page_free(), the ability to mutate the PG_ZERO flag became useless.
Instead, I would like to say that "Once a page becomes valid, its
PG_ZERO flag must be ignored."
would actually map the file with read access enabled. According to
http://www.opengroup.org/onlinepubs/007904975/functions/mmap.html this is
an error. Similarly, an madvise(..., MADV_WILLNEED) would enable read
access on a virtual address range that was PROT_NONE.
The solution implemented herein is (1) to pass a vm_prot_t to
vm_map_pmap_enter() describing the allowed access and (2) to make
vm_map_pmap_enter() responsible for understanding the limitations of
pmap_enter_quick().
Submitted by: "Mark W. Krentel" <krentel@dreamscape.com>
PR: kern/64573
move its declaration to the machine-dependent header file on those
machines that use it. In principle, only i386 should have it.
Alpha and AMD64 should use their direct virtual-to-physical mapping.
- Remove pmap_kenter_temporary() from ia64. It is unused. Approved
by: marcel@
the reduction of the pager map's size by 8M bytes. In other words, eight
megabytes of largely wasted KVA are returned to the kernel map for use
elsewhere.
vm_mmap_vnode function, where we can safely check for a special /dev/zero
case. Rev. 1.180 has reordered checks and introduced a regression.
Submitted by: alc
Was broken by: kan
to mmap it PROT_EXEC. This also depends on the architecture, as some
architextures (e.g. i386) do not distinguish between read and exec pages
Inspired by: http://linux.bkbits.net:8080/linux-2.4/cset@1.1267.1.85
Reviewed by: alc
pmap. For the kernel pmap, Giant is not required. In general, for
other pmaps, Giant is required by i386's pmap_pte() implementation.
Specifically, the use of PMAP2/PADDR2 is synchronized by Giant.
Note: In principle, updates to the kernel pmap's wired count could be
lost without Giant. However, in practice, we never use the kernel
pmap's wired count. This will be resolved when pmap locking appears.
- With the above change, cpu_thread_clean() and uma_large_free() need
not acquire Giant. (The first case is simply the revival of
i386/i386/vm_machdep.c's revision 1.226 by peter.)
ever since alpha/alpha/pmap.c revision 1.81 introduced the list allpmaps,
there has been no reason for having this function on Alpha. Briefly,
when pmap_growkernel() relied upon the list of all processes to find and
update the various pmaps to reflect a growth in the kernel's valid
address space, pmap_init2() served to avoid a race between pmap
initialization and pmap_growkernel(). Specifically, pmap_pinit2() was
responsible for initializing the kernel portions of the pmap and
pmap_pinit2() was called after the process structure contained a pointer
to the new pmap for use by pmap_growkernel(). Thus, an update to the
kernel's address space might be applied to the new pmap unnecessarily,
but an update would never be lost.
introduction of kern_mlock() and kern_munlock() in
src/sys/kern/kern_sysctl.c 1.150
src/sys/vm/vm_extern.h 1.69
src/sys/vm/vm_glue.c 1.190
src/sys/vm/vm_mmap.c 1.179
because different resource limits are appropriate for transient and
"permanent" page wiring requests.
Retain the kern_mlock() and kern_munlock() API in the revived
vslock() and vsunlock() functions.
Combine the best parts of each of the original sets of implementations
with further code cleanup. Make the mclock() and vslock()
implementations as similar as possible.
Retain the RLIMIT_MEMLOCK check in mlock(). Move the most strigent
test, which can return EAGAIN, last so that requests that have no
hope of ever being satisfied will not be retried unnecessarily.
Disable the test that can return EAGAIN in the vslock() implementation
because it will cause the sysctl code to wedge.
Tested by: Cy Schubert <Cy.Schubert AT komquats.com>
unnecessary and wrong. While it is necessary to verify that the page is
still free after dropping and reacquiring the free page queue lock, the
physical contiguity of the page can not change, making this check
unnecessary. This check was wrong in that it could cause an out-of-bounds
array access.
Tested by: rwatson
vm_page_free() is called. The problem with holding this lock is that it is
a spin lock and vm_page_free() may attempt the acquisition of a different
default-type lock.
the syscall arguments and does the suser() permission check, and
kern_mlock(), which does the resource limit checking and calls
vm_map_wire(). Split munlock() in a similar way.
Enable the RLIMIT_MEMLOCK checking code in kern_mlock().
Replace calls to vslock() and vsunlock() in the sysctl code with
calls to kern_mlock() and kern_munlock() so that the sysctl code
will obey the wired memory limits.
Nuke the vslock() and vsunlock() implementations, which are no
longer used.
Add a member to struct sysctl_req to track the amount of memory
that is wired to handle the request.
Modify sysctl_wire_old_buffer() to return an error if its call to
kern_mlock() fails. Only wire the minimum of the length specified
in the sysctl request and the length specified in its argument list.
It is recommended that sysctl handlers that use sysctl_wire_old_buffer()
should specify reasonable estimates for the amount of data they
want to return so that only the minimum amount of memory is wired
no matter what length has been specified by the request.
Modify the callers of sysctl_wire_old_buffer() to look for the
error return.
Modify sysctl_old_user to obey the wired buffer length and clean up
its implementation.
Reviewed by: bms
swap_pager_putpages()'s buffer completion code. Note: the only
difference between swp_pager_sync_iodone() and bdone(), aside from
the locking in the latter, was the unnecessary clearing of B_ASYNC.
- Remove an unnecessary pmap_page_protect() from
swp_pager_async_iodone().
Reviewed by: tegge
result in a panic "vm_page_cache: caching a dirty page, ...": Access to the
page must be restricted or removed before calling vm_page_cache(). This
race condition is identical in nature to that which was addressed by
vm_pageout.c's revision 1.251 and vm_page.c's revision 1.275.
MFC after: 7 days
panic "vm_page_cache: caching a dirty page, ...": Access to the page must
be restricted or removed before calling vm_page_cache(). This race
condition is identical in nature to that which was addressed by
vm_pageout.c's revision 1.251 and vm_page.c's revision 1.275.
Reviewed by: tegge
MFC after: 7 days
could result in a panic "vm_page_cache: caching a dirty page, ...":
Access to the page must be restricted or removed before calling
vm_page_cache(). This race condition is identical in nature to that
which was addressed by vm_pageout.c's revision 1.251.
- Simplify the code surrounding the fix to this same race condition
in vm_pageout.c's revision 1.251. There should be no behavioral
change. Reviewed by: tegge
MFC after: 7 days
shown that it is not useful.
Rename the relative count g_access_rel() function to g_access(), only
the name has changed.
Change all g_access_rel() calls in our CVS tree to call g_access() instead.
Add an #ifndef BURN_BRIDGES #define of g_access_rel() for source
code compatibility.
the added comment for low-level details.) The effect of this race
condition is a panic "vm_page_cache: caching a dirty page, ..."
Reviewed by: tegge
MFC after: 7 days
- struct plimit includes a mutex to protect a reference count. The plimit
structure is treated similarly to struct ucred in that is is always copy
on write, so having a reference to a structure is sufficient to read from
it without needing a further lock.
- The proc lock protects the p_limit pointer and must be held while reading
limits from a process to keep the limit structure from changing out from
under you while reading from it.
- Various global limits that are ints are not protected by a lock since
int writes are atomic on all the archs we support and thus a lock
wouldn't buy us anything.
- All accesses to individual resource limits from a process are abstracted
behind a simple lim_rlimit(), lim_max(), and lim_cur() API that return
either an rlimit, or the current or max individual limit of the specified
resource from a process.
- dosetrlimit() was renamed to kern_setrlimit() to match existing style of
other similar syscall helper functions.
- The alpha OSF/1 compat layer no longer calls getrlimit() and setrlimit()
(it didn't used the stackgap when it should have) but uses lim_rlimit()
and kern_setrlimit() instead.
- The svr4 compat no longer uses the stackgap for resource limits calls,
but uses lim_rlimit() and kern_setrlimit() instead.
- The ibcs2 compat no longer uses the stackgap for resource limits. It
also no longer uses the stackgap for accessing sysctl's for the
ibcs2_sysconf() syscall but uses kernel_sysctl() instead. As a result,
ibcs2_sysconf() no longer needs Giant.
- The p_rlimit macro no longer exists.
Submitted by: mtm (mostly, I only did a few cleanups and catchups)
Tested on: i386
Compiled on: alpha, amd64
when uma_reclaim() was called. This was introduced when the zone
working-set algorithm was removed in favor of using the per cpu caches
as the working set.
"scheduler" here has very little to do with scheduling. It is actually
the swapper, and it really must be the last SYSINIT'ed item like its
comment says, since proc0 metamorphoses into swapper by calling
scheduler() last in mi_start(), and scheduler() never returns.. Rev.1.29
of subr_4bsd.c broke this by adding another SI_ORDER_FIRST item
(kproc_start() for schedcpu_thread() onto the SI_SUB_RUN_SCHEDULER_LIST.
The sorting of SYSINITs with identical orders (at all levels) is
apparently nondeterministic, so this resulted in schedule() sometimes
being called second last and schedcpu_thread() not being called at all.
This quick fix just changes the code to almost match the comment
(SI_ORDER_FIRST -> SI_ORDER_ANY). "LAST" is misspelled "ANY", and
there is no way to ensure that there is only 1 very lst SYSINIT.
A more complete fix would remove the SYSINIT obfuscation.
SW_INVOL. Assert that one of these is set in mi_switch() and propery
adjust the rusage statistics. This is to simplify the large number of
users of this interface which were previously all required to adjust the
proper counter prior to calling mi_switch(). This also facilitates more
switch and locking optimizations.
- Change all callers of mi_switch() to pass the appropriate paramter and
remove direct references to the process statistics.
full state. (When swap is added their state will change appropriately.)
2. Set swap_pager_full and swap_pager_almost_full to the full state when
the last swap device is removed.
Combined these changes eliminate nonsense messages from the kernel on swap-
less machines.
Item 2 submitted by: Divacky Roman <xdivac02@stud.fit.vutbr.cz>
Prodding by: phk
free pages queue. This is presently needed by contigmalloc1().
- Move a sanity check against attempted double allocation of two pages
to the same vm object offset from vm_page_alloc() to vm_page_insert().
This provides better protection because double allocation could occur
through a direct call to vm_page_insert(), such as that by
vm_page_rename().
- Modify contigmalloc1() to hold the mutex synchronizing access to the
free pages queue while it scans vm_page_array in search of free pages.
- Correct a potential leak of pages by contigmalloc1() that I introduced
in revision 1.20: We must convert all cache queue pages to free pages
before we begin removing free pages from the free queue. Otherwise,
if we have to restart the scan because we are unable to acquire the
vm object lock that is necessary to convert a cache queue page to a
free page, we leak those free pages already removed from the free queue.
vm object hasn't changed, the desired page will be at or near the root
of the vm object's splay tree, making vm_page_lookup() cheap. (The only
lock required for vm_page_lookup() is already held.) If, however, the
vm object has changed and retry was requested, eliminating the generation
check also eliminates a pointless acquisition and release of the page
queues lock.
This guard page would have trapped the problems with the MFC of the PAE
support to RELENG_4 at an earlier point in the sequence of events.
Submitted by: tegge
pmap_init(). Such a large preallocation is unnecessary and wastes
nearly eight megabytes of kernel virtual address space per gigabyte
of managed physical memory.
- Increase UMA_BOOT_PAGES by two. This enables the removal of
pmap_pv_allocf(). (Note: this function was only used during
initialization, specifically, after pmap_init() but before
pmap_init2(). During pmap_init2(), a new allocator is installed.)
mincore(2) should check that the page is valid, not just allocated.
Otherwise, it can return a false positive for a page that is not yet
resident because it is being read from disk.
between vm_map and vnode locks is that vm_map locks are acquired first. In
revision 1.150 mmap(2) was changed to pass a locked vnode into vm_mmap().
This creates a lock-order reversal when vm_mmap() calls one of the vm_map
routines that acquires a vm_map lock. The solution implemented herein is
to release the vnode lock in mmap() before calling vm_mmap() and reacquire
this lock if necessary in vm_mmap().
Approved by: re (scottl)
Reviewed by: jeff, kan, rwatson
1) mp_maxid is a valid FreeBSD CPU ID in the range 0 .. MAXCPU - 1.
2) For all active CPUs in the system, PCPU_GET(cpuid) <= mp_maxid.
Approved by: re (scottl)
Tested on: i386, amd64, alpha
was equal to MAXCPU, we would overrun the pcpu_mtx array because maxcpu
was calculated incorrectly.
- Add some more debugging code so that memory leaks at the time of
uma_zdestroy() are more easily diagnosed.
Approved by: re (rwatson)
occurs when kmem_malloc() fails to allocate a sufficient number of vm
pages. Specifically, we avoid the lock-order reversal by not grabbing
Giant around pmap_remove() if the map is the kmem_map.
Approved by: re (jhb)
Reported by: Eugene <eugene3@web.de>
on non-VCHR vnodes. This fixes a panic when reading data from files on a
filesystem with a small (less than a page) block size.
PR: 59271
Reviewed by: alc
- Return EBUSY if the region was wired by mlock(2) and MS_INVALIDATE
is specified to msync(2). This is required by the Open Group Base
Specifications Issue 6.
- vm_map_sync() doesn't return KERN_FAILURE. Thus, msync(2) can't
possibly return EIO.
- The second major loop in vm_map_sync() handles sub maps. Thus,
failing on sub maps in the first major loop isn't necessary.
must return EINVAL if size is zero. Submitted by: tegge
- In order to avoid a race condition in multithreaded applications, the
check and removal operations by munmap(2) must be in the same critical
section. To accomodate this, vm_map_check_protection() is modified to
require its caller to obtain at least a read lock on the map.
if we drop into the pmap or vnode layers.
- Migrate the handling of zero-length msync(2)s into vm_map_sync() so that
multithread applications can't change the map between implementing the
zero-length hack in msync(2) and reacquiring the map lock in
vm_map_sync().
Reviewed by: tegge
that msync(2) is its only caller.
- Migrate the parts of the old vm_map_clean() that examined the internals
of a vm object to a new function vm_object_sync() that is implemented in
vm_object.c. At the same, introduce the necessary vm object locking so
that vm_map_sync() and vm_object_sync() can be called without Giant.
Reviewed by: tegge
destination objects are locked on entry and exit. Add comments to
the callers noting that the locks can be released by swap_pager_copy().
- Remove several instances of GIANT_REQUIRED.
the rstack functionality:
1. Fix a KASSERT that tests for the address to be above the upward
growable stack. Typically for rstack, the faulting address can be
identical to the record end of the upward growable entry, and
very likely is on ia64. The KASSERT tested for greater than, not
greater equal, so whenever the register stack had to be grown
the assertion fired.
2. When we grow the upward growable stack entry and adjust the
unlying object, don't forget to adjust the size of the VM map.
Not doing so would trigger an assert in vm_mapzdtor().
Pointy hat: marcel (for not testing with INVARIANTS).
of lock acquires and releases performed.
- Move an assertion from vm_object_collapse() to vm_object_zdtor()
because it applies to all cases of object destruction.
vm_pageout_page_stats() from Giant.
- Modify vm_pager_put_pages() and vm_pager_page_unswapped() to expect the
vm object to be locked on entry. (All of the pager routines now expect
this.)
vm_pageout_scan(). Rationale: I don't like leaving a busy page in the
cache queue with neither the vm object nor the vm page queues lock held.
- Assert that the page is active in vm_pageout_page_stats().
