Summary:
The Freescale e500v2 PowerPC core does not use a standard FPU.
Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor
unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the
stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this.
Additionaly, the SPE opcodes overlap with Altivec, so these are mutually
exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was
created with the same function set as in powerpc/powerpc/altivec.c, so it
becomes effectively a drop-in replacement. setjmp/longjmp were modified to save
the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by
the SPE).
Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not
support double-precision floating point.
Also, without a new MACHINE_ARCH it would be impossible to provide binary
packages which utilize the SPE.
Additionally, no work has been done to support ports, work is needed for this.
This also means no newer gcc can yet be used. However, gcc's powerpc support
has been refactored which would make adding a powerpcspe-freebsd target very
easy.
Test Plan:
This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222
(P1022-based) board, compiled against the new ABI. Base system utilities
(/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot
multiuser.
Reviewed By: bdrewery, imp
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D5683
s_{fabs,fmax,logb,scalb}{,f,l}.c may be built elsewhere with a higher
WARNS setting.
Reviewed by: ed
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8061
the build on i386. Leave them in the source tree for regression tests.
The asm functions were always much less accurate (by a factor of more
than 10**18 in the worst case). They were faster on old CPUs. But
with each new generation of CPUs they get relatively slower. The
double precision C version's average advantage is about a factor of 2
on Haswell.
The asm functions were already intentionally avoided in float and long
double precision on i386 and in all precisions on amd64. Float
precision and amd64 give larger advantages to the C version. The long
double precision C code and compilers' understanding of long double
precision are not so good, so the i387 is still slightly faster for
long double precision, except for the unimportant subcase of huge args
where the sub-optimal C code now somehow beats the i387 by about a
factor of 2.
versions of fmodf() amd fmodl() on i387.
fmod is similar to remainder, and the C versions are 3 to 9 times
slower than the asm versions on x86 for both, but we had the strange
mixture of all 6 variants of remainder in asm and only 1 of 6
variants of fmod in asm.
after r298107
Summary of changes:
- Replace all instances of FILES/TESTS with ${PACKAGE}FILES. This ensures that
namespacing is kept with FILES appropriately, and that this shouldn't need
to be repeated if the namespace changes -- only the definition of PACKAGE
needs to be changed
- Allow PACKAGE to be overridden by callers instead of forcing it to always be
`tests`. In the event we get to the point where things can be split up
enough in the base system, it would make more sense to group the tests
with the blocks they're a part of, e.g. byacc with byacc-tests, etc
- Remove PACKAGE definitions where possible, i.e. where FILES wasn't used
previously.
- Remove unnecessary TESTSPACKAGE definitions; this has been elided into
bsd.tests.mk
- Remove unnecessary BINDIRs used previously with ${PACKAGE}FILES;
${PACKAGE}FILESDIR is now automatically defined in bsd.test.mk.
- Fix installation of files under data/ subdirectories in lib/libc/tests/hash
and lib/libc/tests/net/getaddrinfo
- Remove unnecessary .include <bsd.own.mk>s (some opportunistic cleanup)
Document the proposed changes in share/examples/tests/tests/... via examples
so it's clear that ${PACKAGES}FILES is the suggested way forward in terms of
replacing FILES. share/mk/bsd.README didn't seem like the appropriate method
of communicating that info.
MFC after: never probably
X-MFC with: r298107
PR: 209114
Relnotes: yes
Tested with: buildworld, installworld, checkworld; buildworld, packageworld
Sponsored by: EMC / Isilon Storage Division
The testcase always fails today due to how C11 7.6.1/2 is interpreted
with clang 3.8.0 when combined with "#pragma STDC FENV_ACCESS ON".
This testcase passes with clang <3.8.0 and gcc, so continue testing it
with those compiler combinations
More intelligent discussion on the issue is in the PR
MFC after: never
PR: 208703
Sponsored by: EMC / Isilon Storage Division
The previous method would completely nerf CFLAGS once bsd.progs.mk had
recursed into the per-PROG logic and make the CFLAGS for tap testcases
to -O0, instead of appending to CFLAGS for all of the tap testcases.
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
the constraints on what needs to be installed in a specific to
maintain consistency during upgrades.
Create a new clibs package containing libraries that are needed
as a bare minimum for consistency.
With much help and input from: kib
Sponsored by: The FreeBSD Foundation
into the FreeBSD test suite
There's no functional change with these testcases; they're purposely
being left in TAP format for the time being
Other testcases which crash on amd64/i386 as-is have not been
integrated yet (they need to be retested on a later version of
CURRENT, as I haven't used i386 in some time)
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
RISC-V is a new ISA designed to support computer research and education, and
is now become a standard open architecture for industry implementations.
This is a minimal set of changes required to run 'make kernel-toolchain'
using external (GNU) toolchain.
The FreeBSD/RISC-V project home: https://wiki.freebsd.org/riscv.
Reviewed by: andrew, bdrewery, emaste, imp
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
Differential Revision: https://reviews.freebsd.org/D4445
This both avoids some dependencies on xinstall.host and allows
bootstrapping on older releases to work due to lack of at least 'install -l'
support.
Sponsored by: EMC / Isilon Storage Division
netbsd-tests.test.mk (r289151)
- Eliminate explicit OBJTOP/SRCTOP setting
- Convert all ad hoc NetBSD test integration over to netbsd-tests.test.mk
- Remove unnecessary TESTSDIR setting
- Use SRCTOP where possible for clarity
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Divison
point support. The fenv-vfp.c file overrides -mfloat-abi so it can use
floating point instructions if it detects support at runtime. Make it also
override -mfpu in case the user has set -mfpu=none.
- Fix a case where NaNs were not mixed correctly and signalling NaNs were
not converted to quiet NaNs.
- Eliminate two negations from ctan(z).
In collaboration with: bde
but must still satisfy csinh(conj(z)) == conj(csinh(z)) and csinh(-z) ==
-csinh(z). This allows eliminating two negations from csin(z).
In collaboration with: bde
Since METAMODE has been added, sys.mk loads bsd.mkopt.mk which ends load loading
bsd.own.mk which then defines SHLIBDIR before all the Makefile.inc everywhere.
This makes /lib being populated again.
Reported by: many
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
and qone[f]() were marked as __inline, but their forward
declarations were not updated. Fix the forward declarations
to match the actual function declarations.
Requested by: bde
MACHINE_CPUARCH or MACHINE_ARCH, not MACHINE. The latter is for kernel
only things. Also, I think this should be unconditional since all our
architectures have long double support, but I don't have time to test
that thoroughly so just add a comment to that effect.
The conditional came from NetBSD, where only select architectures have this
header/support
All architectures on FreeBSD have the necessary support though, so the
conditional's completely unnecessary
make tinderbox done on all architectures (including arm64, where the issue
occurred before) this time
X-MFC with: r282057, r282092
MFC after: 6 days
only adds support for kernel-toolchain, however it is expected further
changes to add kernel and userland support will be committed as they are
reviewed.
As our copy of binutils is too old the devel/aarch64-binutils port needs
to be installed to pull in a linker.
To build either TARGET needs to be set to arm64, or TARGET_ARCH set to
aarch64. The latter is set so uname -p will return aarch64 as existing
third party software expects this.
Differential Revision: https://reviews.freebsd.org/D2005
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
should raise a divide-by-zero floating point exception for x = +-0
and an invalid floating point exception for x < 0 including x = -Inf.
Update the code to raise the exception and update the documentation
with hopefully better description of the behavior.
Reviewed by: bde (code only)
values for the different invervals were not converted correctly.
Adjust the threshold values to values, which should agree with the
comments.
Reported by: cognet (j1f only)
Discussed with: pfg, bde
Reviewed by: bde
Drop an unnecessary check in some calculations. The check
would have Coverity falsely conclude that variables could
be left undefined.
Discussed with: kargl, bde
Reviewed by: bde
within [INT_MIN, INT_MAX] where the magnitude of the lower
and upper bounds are sufficiently large to span the range of
scalbn[fl].
While here, remove the GNU style bug in the function declarations.
Reviewed by: bde, pfg
The changes unrelated to the bug in r277948 made
the code very difficult to understand to both
coverity and regular humans so take a step back
to something that is much easier to understand
for both and follows better the original code.
CID: 1267992, 1267993, 1267994
Discussed with: kargl
This fixes evaluation of exceptional values in scalblnl().
While here, simplify the code as suggested by Bruce Evans.
Reported by: clang static analyzer
MFC after: 1 week
The C11 standard introduced a set of macros (CMPLX, CMPLXF, CMPLXL) that
can be used to construct complex numbers from a pair of real and
imaginary numbers. Unfortunately, they require some compiler support,
which is why we only define them for Clang and GCC>=4.7.
The cpack() function in libm performs the same task as CMPLX(), but
cannot be used to generate compile-time constants. This means that all
invocations of cpack() can safely be replaced by C11's CMPLX(). To keep
the code building with GCC 4.2, provide copies of CMPLX() that can at
least be used to generate run-time complex numbers.
This makes it easier to build some of the functions outside of libm.
for |x| small.
While here, remove the explicit cast of 0.25 to float. Replace
a multiplication involving 0.25 by a division using an integer
constant 4. Make a similar change in j0() to minimize the diff.
Suggested by: bde
It is automatically set when -fPIC is passed to the compiler.
Reviewed by: dim, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D1179
A variant of this code has been tested on amd64/i386 for some time by
EMC/Isilon on 10-STABLE/11-CURRENT. It builds on other architectures, but the
code will remain off until it's proven it works on virtual hardware or real
hardware on other architectures
Sponsored by: EMC / Isilon Storage Division
lgamma(x) = -log(x) - log(1+x) + x*(1-g) + x**2*P(x) with g = 0.57...
being the Euler constant and P(x) a polynomial. Substitution of small
into the RHS shows that the last 3 terms are negligible in comparison to
the leading term. The choice of 3 may be conservative.
The value large=2**(p+3) is detemined from Stirling's approximation
lgamma(x) = x*(log(x)-1) - log(x)/2 + log(2*pi)/2 + P(1/x)/x
Again, substitution of large into the RHS reveals the last 3 terms
are negligible in comparison to the leading term.
Move the x=+-0 special case into the |x|<small block.
In the ld80 and ld128 implementaion, use fdlibm compatible comparisons
involving ix, lx, and llx. This replaces several floating point
comparisons (some involving fabsl()) and also fixes the special cases
x=1 and x=2.
While here
. Remove unnecessary parentheses.
. Fix/improve comments due to the above changes.
. Fix nearby whitespace.
* src/e_lgamma_r.c:
. Sort declaration.
. Remove unneeded explicit cast for type conversion.
. Replace a double literal constant by an integer literal constant.
* src/e_lgammaf_r.c:
. Sort declaration.
* ld128/e_lgammal_r.c:
. Replace a long double literal constant by a double literal constant.
* ld80/e_lgammal_r.c:
. Remove unused '#include float.h'
. Replace a long double literal constant by a double literal constant.
Requested by: bde
. Hook e_lgammal[_r].c to the build.
. Create man page links for lgammal[-r].3.
* Symbol.map:
. Sort lgammal to its rightful place.
. Add FBSD_1.4 section for the new lgamal_r symbol.
* ld128/e_lgammal_r.c:
. 128-bit implementataion of lgammal_r().
* ld80/e_lgammal_r.c:
. Intel 80-bit format implementation of lgammal_r().
* src/e_lgamma.c:
. Expose lgammal as a weak reference to lgamma for platforms
where long double is mapped to double.
* src/e_lgamma_r.c:
. Use integer literal constants instead of real literal constants.
Let compiler(s) do the job of conversion to the appropriate type.
. Expose lgammal_r as a weak reference to lgamma_r for platforms
where long double is mapped to double.
* src/e_lgammaf_r.c:
. Fixed the Cygnus Support conversion of e_lgamma_r.c to float.
This includes the generation of new polynomial and rational
approximations with fewer terms. For each approximation, include
a comment on an estimate of the accuracy over the relevant domain.
. Use integer literal constants instead of real literal constants.
Let compiler(s) do the job of conversion to the appropriate type.
This allows the removal of several explicit casts of double values
to float.
* src/e_lgammal.c:
. Wrapper for lgammal() about lgammal_r().
* src/imprecise.c:
. Remove the lgamma.
* src/math.h:
. Add a prototype for lgammal_r().
* man/lgamma.3:
. Document the new functions.
Reviewed by: bde
inf and raises the divided-by-zero exception. Compilers
constant fold one/zero to inf but do not raise the exception.
Introduce a volatile vzero to prevent the constant folding.
Move the declaration of zero into the main declaration block.
While here, fix a nearby disordering of 'lx,ix'
Discussed with: bde
Remove parentheses in a return statement to be consistent with the
rest of the file.
Rename sin_pi() in the float version to sin_pif().
Remove large comment that precedes sin_pif(). The comment
duplicates a comment in e_lgamma_r.c where the algorithm
is documented.
Requested by: bde
sin_pi(x) is only called for x < 0 and |x| < 2**(p-1) where p is
the precision of x. The new argument reduction is an optimization
compared to the old code, and it removes a chunk of dead code.
Accuracy tests in the intervals (-21,-20), (-20,-19), ... (-1,0)
show no differences between the old and new code.
Obtained from: bde
By Richard Earnshaw at ARM
>
>GCC has for a number of years provides a set of pre-defined macros for
>use with determining the ISA and features of the target during
>pre-processing. However, the design was always somewhat cumbersome in
>that each new architecture revision created a new define and then
>removed the previous one. This meant that it was necessary to keep
>updating the support code simply to recognise a new architecture being
>added.
>
>The ACLE specification (ARM C Language Extentions)
>(http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.set.swdev/index.html)
>provides a much more suitable interface and GCC has supported this
>since gcc-4.8.
>
>This patch makes use of the ACLE pre-defines to map to the internal
>feature definitions. To support older versions of GCC a compatibility
>header is provided that maps the traditional pre-defines onto the new
>ACLE ones.
Stop using __FreeBSD_ARCH_armv6__ and switch to __ARM_ARCH >= 6 in the
couple of places in tree. clang already implements ACLE. Add a define
that says we implement version 1.1, even though the implementation
isn't quite complete.
and tgammal in libm. These functions are part of ISO/IEC 9899:1999
and their prototypes should have been moved into the appropriate
__ISO_C_VISIBLE >= 1999 section. After moving the prototypes,
remnants of r236148 can be removed.
PR: standards/191754
Reviewed by: bde
. Add s_erfl.c to building libm.
. Add MLINKS for erfl.3 and erfcl.3.
* Symbol.map:
. Move erfl and erfcl to their proper location.
* ld128/s_erfl.c:
. Implementations of erfl and erfcl in the IEEE 754 128-bit format.
* ld80/s_erfl.c:
. Implementations of erfl and erfcl in the Intel 80-bit format.
* man/erf.3:
. Document the new functions.
. While here, remove an incomplete sentence.
* src/imprecise.c:
. Remove the stupidity of mapping erfl and erfcl to erf and erfc.
* src/math.h:
. Move the declarations of erfl and erfcl to their proper place.
* src/s_erf.c:
. For architectures where double and long double are the same
floating point format, use weak references to map erfl to
erf and ercl to erfc.
Reviewed by: bde (many earlier versions)
* Update the domain and range of comments for the polynomial
approximations, including using the the correct variable names
(e.g., pp(x) instead of p(x)).
* Use hex values of the form 0x3e0375d4 instead of 0x1.06eba8p-3,
which was obtained from printf("%.6a").
* In the domain [0.84375, 1.25], qa(x) can be reduced from a 4th
order polynomial to 3rd order.
* In the domain [1.25,1/0.35], sa(x) can be reduced from a 4th
order polynomial to 3rd order.
* In the domain [1/0.35, 11], the 4th order polynomials rb(x) and
sb(x) can be reduced to 2nd and 3rd order, respectively.
from erronously constant folding expressions of the form
'1 - tiny'. This allows erf[f](x) to raise INEXACT.
* Use 0.5, 1, and 2, which are exactly representable in radix-2
floating point formats. This reduces diffs between s_erf[fl].c.
* While here, add a comment about efx and efx8.
This includes:
o All directories named *ia64*
o All files named *ia64*
o All ia64-specific code guarded by __ia64__
o All ia64-specific makefile logic
o Mention of ia64 in comments and documentation
This excludes:
o Everything under contrib/
o Everything under crypto/
o sys/xen/interface
o sys/sys/elf_common.h
Discussed at: BSDcan
* msun/man/sinh.3:
* msun/man/tanh.3:
. Fix grammar.
* msun/src/e_coshl.c:
* msun/src/e_sinhl.c:
. Fix comment.
* msun/src/s_tanhl.c:
. Remove unused variables.
. Fix location/indentation of comments.
. Use comparison involving ints instead of long double.
. Re-order polynomial evaluation on ld128 for |x| < 0.25.
For now, retain the older order in an "#if 0 ... #else" block.
. Use int comparison to short-circuit the |x| < 1.5 condition.
Requested by: bde
. Hook coshl, sinhl, and tanhl into libm.
. Create symbolic links for corresponding manpages.
. While here remove a nearby extraneous space.
* Symbol.map:
* src/math.h:
. Move coshl, sinhl, and tanhl to their proper locations.
* man/cosh.3:
* man/sinh.3:
* man/tanh.3:
. Update the manpages.
* src/e_cosh.c:
* src/e_sinh.c:
* src/s_tanh.c:
. Add weak reference for LBDL_MANT_DIG==53 targets.
* src/imprecise.c:
. Remove the coshl, sinhl, and tanhl kludge.
* src/e_coshl.c:
. ld80 and ld128 implementation of coshl().
* src/e_sinhl.c:
. ld80 and ld128 implementation of sinhl().
* src/s_tanhl.c:
. ld80 and ld128 implementation of tanhl().
Obtained from: bde (mostly), das and kargl
* ld128/k_expl.h:
. Split out a computational kernel,__k_expl(x, &hi, &lo, &k) from expl(x).
x must be finite and not tiny or huge. The kernel returns hi and lo
values for extra precision and an exponent k for a 2**k scale factor.
. Define additional kernels k_hexpl() and hexpl() that include a 1/2
scaling and are used by the hyperbolic functions.
* ld80/s_expl.c:
* ld128/s_expl.c:
. Use the __k_expl() kernel.
Obtained from: bde
* Use bit twiddling. This requires inclusion of math_private.h
and inclusion of float.h in s_roundl.c. Raise invalid exception.
* Use literal integer constants where possible. Let the compiler
do the appropriate conversion.
* In s_roundf.c, use an F suffix on float constants instead of
promoting float to double and then converting the result back
to float. In s_roundl.c, use an L suffix.
* In s_roundl.c, use the ENTERI and RETURNI macros. This requires
the inclusion of fpmath.h and on __i386__ class hardware ieeefp.h.
Reviewed by: bde
preprocessor) gives the following error:
--- Version.map ---
<stdin>:287:4: error: invalid preprocessing directive
# Implemented as weak aliases for imprecise versions
^
1 error generated.
Change the comment to a C-style one, to prevent this error.
Approved by: re (hrs)
These are weak and so can be replaced by other versions in applications
that choose to do so, and will give a linker warning when used so that
applications that rely on the extra precision can avoid them.
Note that since the C/C++ specs only guarantee that long double has
precision equal to double, code that actually relies on these functions
having greater precision is unportable at best and broken at worst.
. Use integer literal constants instead of double literal constants.
* s_erff.c:
. Use integer literal constants instead of casting double literal
constants to float.
. Update the threshold values from those carried over from erf() to
values appropriate for float.
. New sets of polynomial coefficients for the rational approximations.
These coefficients have little, but positive, effect on the maximum
error in ULP in the four intervals, but do improve the overall
speed of execution.
. Remove redundant GET_FLOAT_WORD(ix,x) as hx already contained the
contents that is packed into ix.
. Update the mask that is used to zero-out lower-order bits in x in
the intervals [1.25, 2.857143] and [2.857143, 12]. In tests on
amd64, this change improves the maximum error in ULP from 6.27739
and 63.8095 to 3.16774 and 2.92095 on these intervals for erffc().
Reviewed by: bde
