bhyve uses cached copies of the MSI capability registers to generate
MSI interrupts for device models. Previously, these cached fields
were only set when the MSI capability control register was updated.
The Linux kernel recently adopted a change to deal with races in MSI
interrupt delivery that writes to the MSI capability address and data
registers to alter the destination of MSI interrupts without writing
to the MSI capability control register. bhyve was not updating its
cached registers for these writes and continued to send interrupts
with the old data value to the old address. Fix this by recomputing
the cached values for every write to any MSI capability register.
Reported by: Jason Tubnor, Ryan Moeller
Reported by: Marc Dionne (bisected the Linux kernel commit)
Reviewed by: grehan
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D24593
This patch is intended to solve a specific problem that iavf(4)
encounters, but what it does can be extended to solve other issues.
To summarize the iavf(4) issue, if the PF driver configures VLAN
anti-spoof, then the VF driver needs to make sure no untagged traffic is
sent if a VLAN is configured, and vice-versa. This can be an issue when
a VLAN is being registered or unregistered, e.g. when a packet may be on
the ring with a VLAN in it, but the VLANs are being unregistered. This
can cause that tagged packet to go out and cause an MDD event.
To fix this, include a new interface-dependent function that drivers can
implement named IFDI_NEEDS_RESTART(). Right now, this function is called
in iflib_vlan_unregister/register() to determine whether the interface
needs to be stopped and started when a VLAN is registered or
unregistered. The default return value of IFDI_NEEDS_RESTART() is true,
so this fixes the MDD problem that iavf(4) encounters, since the
interface rings are flushed during a stop/init.
A future change to iavf(4) will implement that function just in case the
default value changes, and to make it explicit that this interface reset
is required when a VLAN is added or removed.
Reviewed by: gallatin@
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D22086
Now that hw.machine_arch handles soft-float vs hard-float there is no
longer a reason for this config.
Submitted by: mhorne (kern.mk hunk)
Reviewed by: imp (earlier version), kp
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24544
FreeBSD is in the process of switching from nvd(4) to nda(4) as the disk
device front-end to NVMe. Changing the default in the kernel is tricky
since existing systems may have /dev/nvd* hard-coded e.g. in /etc/fstab;
however, there's no reason to not change the default in HEAD for *new*
systems.
At present I have no intention of MFCing this to stable branches, since
someone might reasonably expect scripts they use for launching and
configuring FreeBSD 12.1 instances to work with FreeBSD 12.2 AMIs, for
example.
Reviewed by: gjb, imp
Relnotes: NVMe disks in EC2 instances launched from 13.0 and later
now show up as nda(4) devices.
Differential Revision: https://reviews.freebsd.org/D24583
Instead, copy the strings into a temporary buffer on the stack and
run strcmp on the copies.
Reviewed by: brooks, kib
Obtained from: CheriBSD
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24567
For userland, MACHINE_ARCH reflects the current ABI via preprocessor
directives. For the kernel, the hw.machine_arch sysctl uses the ELF
header flags of the current process to select the correct MACHINE_ARCH
value.
Reviewed by: imp, kp
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24543
This extends some of the changes in place to support reporting support
for 32-bit ABIs to permit reporting hard-float vs soft-float ABIs.
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24542
latest rack and bbr in from the NF repo. When those come
in the OOB data handling will be fixed where Skyzaller crashes.
Differential Revision: https://reviews.freebsd.org/D24575
sendto(2), sendmsg(2) and sendmmsg(2) return ENOTCONN if a destination
address is specified and the socket is not connected and the socket
protocol does not automatically connect ("implied connect"). Document
that. Also document the fact that the destination address is ignored
for connection-mode sockets if the socket is already connected.
PR: 245817
Submitted by: Erik Inge Bolsø <knan-bfo@modirum.com>
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D24530
Contrary to the kevent man page, EV_EOF on a fifo is not cleared by
EV_CLEAR. Modify the read and write filters to clear EV_EOF when the
fifo's PIPE_EOF flag is clear, and update the man page to document the
new behaviour.
Modify the write filter to return the amount of buffer space available
even if no readers are present. This matches the behaviour for sockets.
When reading from a pipe, only call pipeselwakeup() if some data was
actually read. This prevents the continuous re-triggering of a
EVFILT_READ event on EOF when in edge-triggered mode.
PR: 203366, 224615
Submitted by: Jan Kokemüller <jan.kokemueller@gmail.com>
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24528
This ensures that pipe_poll() and the pipe kqueue filters observe
PIPE_EOF and set EV_EOF accordingly. As a result an extra call to
knote() after setting PIPE_EOF is unnecessary.
Submitted by: Jan Kokemüller <jan.kokemueller@gmail.com>
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24528
r356313 broke handling of dirty file system because we have restricted
the correction of "odd" byte sequences to checkfat(), and as a result
the dirty bit is never cleared. The old fsck_msdosfs code would write
FAT twice to fix the dirty bit, which is also not ideal.
Fix this by introducing a new rountine, cleardirty() which will perform
the set of clean bit only, and use it in checkfilesys() if we thought
the file system was dirty.
Reviewed by: cem, emaste
MFC after: 3 day
Differential Revision: https://reviews.freebsd.org/D24581
Attach sockstat -j to the specified jail if the jail is in a new vnet.
Otherwise we do not see all sockets belonging to the jail.
Reviewed by: jamie
Approved by: mmacy (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D24413
Previously we allocated a separate VM object for each kernel stack.
However, fully constructed kernel stacks are cached by UMA, so there is
no harm in using a single global object for all stacks. This reduces
memory consumption and makes it easier to define a memory allocation
policy for kernel stack pages, with the aim of reducing physical memory
fragmentation.
Add a global kstack_object, and use the stack KVA address to index into
the object like we do with kernel_object.
Reviewed by: kib
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24473
Some models of laptops e.g. "X1 Carbon 3rd Gen Thinkpad" have LRM buttons
wired as so called "Synaptic touchpads extended buttons" rather thah real
trackpoint buttons. Handle this case with merging of events from both
sources.
PR: 245877
Reported by: Raichoo <raichoo@googlemail.com>
MFC after: 1 week
[ARM] Only produce qadd8b under hasV6Ops
When compiling for a arm5te cpu from clang, the +dsp attribute is
set. This meant we could try and generate qadd8 instructions where we
would end up having no pattern. I've changed the condition here to be
hasV6Ops && hasDSP, which is what other parts of ARMISelLowering seem
to use for similar instructions.
Fixed PR45677.
This fixes "fatal error: error in backend: Cannot select: t37: i32 =
ARMISD::QADD8b t43, t44" when compiling sys/dev/sound/pcm/feeder_mixer.c
for armv5. For some reason we do not encounter this on head, but this
error popped up while building universes for stable/12.
MFC after: 3 days
Introduce new fib[46]_lookup_debugnet() functions serving as a
special interface for the crash-time operations. Underlying
implementation will try to return lookup result if
datastructures are not corrupted, avoding locking.
Convert debugnet to use fib4_lookup_debugnet() and switch it
to use nexthops instead of rtentries.
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D24555
It was broken by r360292 as fib6_lookup() assumes de-embedded addresses
while rtalloc_mpath_fib() requires sockaddr with embedded ones.
New fib6_lookup() transparently supports multipath, hence
remove old RADIX_MPATH condition.
The pf_frag_mtx mutex protects the fragments queue. The fragments queue
is virtualised already (i.e. per-vnet) so it makes no sense to block
jail A from accessing its fragments queue while jail B is accessing its
own fragments queue.
Virtualise the lock for improved concurrency.
Differential Revision: https://reviews.freebsd.org/D24504
We used to have an issue with recursive locking with
net.link.bridge.inherit_mac. This causes us to send an ARP request while
we hold the BRIDGE_LOCK, which used to cause us to acquire the
BRIDGE_LOCK again. We can't re-acquire it, so this caused a panic.
Now that we no longer need to acquire the BRIDGE_LOCK for
bridge_transmit() this should no longer panic. Test this.
PR: 216510
Reviewed by: emaste, philip
MFC after: 2 months
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24251
Run the bridge datapath under epoch, rather than under the
BRIDGE_LOCK().
We still take the BRIDGE_LOCK() whenever we insert or delete items in
the relevant lists, but we use epoch callbacks to free items so that
it's safe to iterate the lists without the BRIDGE_LOCK.
Tests on mercat5/6 shows this increases bridge throughput significantly,
from 3.7Mpps to 18.6Mpps.
Reviewed by: emaste, philip, melifaro
MFC after: 2 months
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24250
If we pass an anchor name which doesn't exist pfr_table_count() returns
-1, which leads to an overflow in mallocarray() and thus a panic.
Explicitly check that pfr_table_count() does not return an error.
Reported-by: syzbot+bd09d55d897d63d5f4f4@syzkaller.appspotmail.com
Reviewed by: melifaro
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D24539
The new tests have more complete setup and cleanup, are more granular, and
correctly annotate expected failures and skipped tests. A follow-up commit
will resolve a conflict with the fusefs tests (bug 244229).
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24257
r360292 introduced the wrong order, resulting in returned
nhops not being referenced, despite the fact that references
were requested. That lead to random GPF after using SCTP sockets.
Special defined macro like IPV[46]_SCOPE_GLOBAL will be introduced
soon to reduce the chance of putting arguments in wrong order.
Reported-by: syzbot+5c813c01096363174684@syzkaller.appspotmail.com
While at it use strtol() instead of atoi() to support hexadecimal
numbers aswell as 10-base numbers.
Submitted by: Marc Veldman <marc@bumblingdork.com>
PR: 245899
MFC after: 1 week
Sponsored by: Mellanox Technologies
Release kernels have no KDB backends enabled, so they discard an NMI
if it is not due to a hardware failure. This includes NMIs from
IPMI BMCs and hypervisors.
Furthermore, the interaction of panic_on_nmi, kdb_on_nmi, and
debugger_on_panic is confusing.
Respond to all NMIs according to panic_on_nmi and debugger_on_panic.
Remove kdb_on_nmi. Expand the meaning of panic_on_nmi by making
it a bitfield. There are currently two bits: one for NMIs due to
hardware failure, and one for all others. Leave room for more.
If panic_on_nmi and debugger_on_panic are both true, don't actually panic,
but directly enter the debugger, to allow someone to leave the debugger
and [hopefully] resume normal execution.
Reviewed by: kib
MFC after: 2 weeks
Relnotes: yes: machdep.kdb_on_nmi is gone; machdep.panic_on_nmi changed
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D24558
The latter needs the former, but with a multi-job build on a fast
machine, the race is sometimes lost. This leads to "ld: error: unable to
find library -lsbuf", when linking libgeom.so.
Submitted by: kevans
MFC after: 3 days
Store the attached regulator in a tailq to later find them in ofw_map.
While here, do not attempt to attach a regulator without a name, a node
might exists but if it doesn't have a name the regulator is unused.
MFC after: 1 month
In r326576 ("use @@@ instead of @@ in __sym_default"), an earlier version of
the phabricator-discussed patch was inadvertently committed. The commit
message claims that @@@ means that weak is not needed, but that was due to a
misunderstanding of the use of weak symbols in this context by the submitted
in the first draft of the patch; the description text was not updated to
match the discussion. As discussed in phabricator, weak is needed for
symbol interposing because of the behavior of our rtld, and is widely used
elsewhere in libc.
This partial revert restores the approved version of the patch and permits
symbol interposing for openat.
Reported by: Raymond Ramsden <rramsden AT isilon.com>
Reviewed by: dim, emaste, kib (2017)
Discussed with: kib (2020)
Differential Revision: https://reviews.freebsd.org/D11653
If pin is switched from fixed function to GPIO, it should have prepared
direction, pull-up/down and default value before function gets switched.
Otherwise we may produce unwanted glitch on output pin.
Right order of drive strength settings is questionable, but I think that
is slightly safer to do it also before function switch.
This fixes serial port corruption observed after DT 5.6 import.
MFC after: 1 week
This change is build on top of nexthop objects introduced in r359823.
Nexthops are separate datastructures, containing all necessary information
to perform packet forwarding such as gateway interface and mtu. Nexthops
are shared among the routes, providing more pre-computed cache-efficient
data while requiring less memory. Splitting the LPM code and the attached
data solves multiple long-standing problems in the routing layer,
drastically reduces the coupling with outher parts of the stack and allows
to transparently introduce faster lookup algorithms.
Route caching was (re)introduced to minimise (slow) routing lookups, allowing
for notably better performance for large TCP senders. Caching works by
acquiring rtentry reference, which is protected by per-rtentry mutex.
If the routing table is changed (checked by comparing the rtable generation id)
or link goes down, cache record gets withdrawn.
Nexthops have the same reference counting interface, backed by refcount(9).
This change merely replaces rtentry with the actual forwarding nextop as a
cached object, which is mostly mechanical. Other moving parts like cache
cleanup on rtable change remains the same.
Differential Revision: https://reviews.freebsd.org/D24340
The macros CAST_USER_ADDR_T() and CAST_DOWN() were used for the Mac OS/X
port. The first of these macros was a no-op for FreeBSD and the second
is no longer used.
This patch gets rid of them. It also deletes the "mbuf_t" typedef which
is no longer used in the FreeBSD code from nfskpiport.h
This patch should not change semantics.
