fseeko(file_size, SEEK_SET) -> fseek(0L, SEEK_END)
1) File may grows between operations, so fseeko to file_size may miss
2) 0L, SEEK_END is the same code using in tail in all other places
The PAM_FAIL_CHECK and PAM_END macros in su.c came from the util-linux
package's PAM patches to the BSD login.c
Submitted by: "David J. MacKenzie" <djm@web.us.uu.net>
Some of the major changes include:
- The SCSI error handling portion of cam_periph_error() has
been broken out into a number of subfunctions to better
modularize the code that handles the hierarchy of SCSI errors.
As a result, the code is now much easier to read.
- String handling and error printing has been significantly
revamped. We now use sbufs to do string formatting instead
of using printfs (for the kernel) and snprintf/strncat (for
userland) as before.
There is a new catchall error printing routine,
cam_error_print() and its string-based counterpart,
cam_error_string() that allow the kernel and userland
applications to pass in a CCB and have errors printed out
properly, whether or not they're SCSI errors. Among other
things, this helped eliminate a fair amount of duplicate code
in camcontrol.
We now print out more information than before, including
the CAM status and SCSI status and the error recovery action
taken to remedy the problem.
- sbufs are now available in userland, via libsbuf. This
change was necessary since most of the error printing code
is shared between libcam and the kernel.
- A new transfer settings interface is included in this checkin.
This code is #ifdef'ed out, and is primarily intended to aid
discussion with HBA driver authors on the final form the
interface should take. There is example code in the ahc(4)
driver that implements the HBA driver side of the new
interface. The new transfer settings code won't be enabled
until we're ready to switch all HBA drivers over to the new
interface.
src/Makefile.inc1,
lib/Makefile: Add libsbuf. It must be built before libcam,
since libcam uses sbuf routines.
libcam/Makefile: libcam now depends on libsbuf.
libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the
sbuf sources from sys/kern.
bsd.libnames.mk: Add LIBSBUF.
camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically
linked, we can't depend on the dynamic linker
to pull in libsbuf.
camcontrol.c: Use cam_error_print() instead of checking for
CAM_SCSI_STATUS_ERROR on every failed CCB.
sbuf.9: Change the prototypes for sbuf_cat() and
sbuf_cpy() so that the source string is now a
const char *. This is more in line wth the
standard system string functions, and helps
eliminate warnings when dealing with a const
source buffer.
Fix a typo.
cam.c: Add description strings for the various CAM
error status values, as well as routines to
look up those strings.
Add new cam_error_string() and
cam_error_print() routines for userland and
the kernel.
cam.h: Add a new CAM flag, CAM_RETRY_SELTO.
Add enumerated types for the various options
available with cam_error_print() and
cam_error_string().
cam_ccb.h: Add new transfer negotiation structures/types.
Change inq_len in the ccb_getdev structure to
be "reserved". This field has never been
filled in, and will be removed when we next
bump the CAM version.
cam_debug.h: Fix typo.
cam_periph.c: Modularize cam_periph_error(). The SCSI error
handling part of cam_periph_error() is now
in camperiphscsistatuserror() and
camperiphscsisenseerror().
In cam_periph_lock(), increase the reference
count on the periph while we wait for our lock
attempt to succeed so that the periph won't go
away while we're sleeping.
cam_xpt.c: Add new transfer negotiation code. (ifdefed
out)
Add a new function, xpt_path_string(). This
is a string/sbuf analog to xpt_print_path().
scsi_all.c: Revamp string handing and error printing code.
We now use sbufs for much of the string
formatting code. More of that code is shared
between userland the kernel.
scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly
useful in the first place.
Add a new error action, SS_REQSENSE. (Send a
request sense and then retry the command.)
This is useful when the controller hasn't
performed autosense for some reason.
Change the default actions around a bit.
scsi_cd.c,
scsi_da.c,
scsi_pt.c,
scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection
timeouts shouldn't be covered by a sense flag.
scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO.
Get rid of the last vestiges of a read/write
interface.
libkern/bsearch.c,
sys/libkern.h,
conf/files: Add bsearch.c, which is needed for some of the
new table lookup routines.
aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if
CAM_NEW_TRAN_CODE is defined.
sbuf.h,
subr_sbuf.c: Add the appropriate #ifdefs so sbufs can
compile and run in userland.
Change sbuf_printf() to use vsnprintf()
instead of kvprintf(), which is only available
in the kernel.
Change the source string for sbuf_cpy() and
sbuf_cat() to be a const char *.
Add __BEGIN_DECLS and __END_DECLS around
function prototypes since they're now exported
to userland.
kdump/mkioctls: Include stdio.h before cam.h since cam.h now
includes a function with a FILE * argument.
Submitted by: gibbs (mostly)
Reviewed by: jdp, marcel (libsbuf makefile changes)
Reviewed by: des (sbuf changes)
Reviewed by: ken
1) really check for size overflow by checking negative value.
2) since mmap() not support files over INT_MAX size, add check for it
until either mmap() will be fixed or tail will be rewritted to handle
large files alternatively.
3) replace fseek(... file_size, SEEK_SET) with fseek(... 0L, SEEK_END)
to avoid off_t -> long cast
4) Use exit() if file is too big instead of warning and wrong logic
afterwards.
o remove panic() in favor of err(3) and use err(3) functions
consistently throughout
o use stat(2)'s S_IS* macros rather than S_IF*
o [r]index -> str[r]chr
o convert some static buffers to dynamic ones
o use real tempfiles rather than reopening the same templates
o rename some functions that clash with libc
o convert wait_status from union to int and use wait(2) status macros
o fix multiple potential buffer overflows
o fix a few comments
o add $FreeBSD$
Reviewed by: nra, nectar (earlier version)
and compiler warnings.
The data for network statistics are still obtained via the kvm interface
if systat was started with the needed privileges, otherwise sysctls are
used. The reason for this is that with really many open sockets, the
sysctl method is probably slower, but it systat -netstat is probably not
really usable in either mode under these conditions.
Approved by: rwatson
associated changes that had to happen to make this possible as well as
bugs fixed along the way.
Bring in required TLI library routines to support this.
Since we don't support TLI we've essentially copied what NetBSD
has done, adding a thin layer to emulate direct the TLI calls
into BSD socket calls.
This is mostly from Sun's tirpc release that was made in 1994,
however some fixes were backported from the 1999 release (supposedly
only made available after this porting effort was underway).
The submitter has agreed to continue on and bring us up to the
1999 release.
Several key features are introduced with this update:
Client calls are thread safe. (1999 code has server side thread
safe)
Updated, a more modern interface.
Many userland updates were done to bring the code up to par with
the recent RPC API.
There is an update to the pthreads library, a function
pthread_main_np() was added to emulate a function of Sun's threads
library.
While we're at it, bring in NetBSD's lockd, it's been far too
long of a wait.
New rpcbind(8) replaces portmap(8) (supporting communication over
an authenticated Unix-domain socket, and by default only allowing
set and unset requests over that channel). It's much more secure
than the old portmapper.
Umount(8), mountd(8), mount_nfs(8), nfsd(8) have also been upgraded
to support TI-RPC and to support IPV6.
Umount(8) is also fixed to unmount pathnames longer than 80 chars,
which are currently truncated by the Kernel statfs structure.
Submitted by: Martin Blapp <mb@imp.ch>
Manpage review: ru
Secure RPC implemented by: wpaul
A route generated from an RTF_CLONING route had the RTF_WASCLONED flag
set but did not have a reference to the parent route, as documented in
the rtentry(9) manpage. This prevented such routes from being deleted
when their parent route is deleted.
Now, for example, if you delete an IP address from a network interface,
all ARP entries that were cloned from this interface route are flushed.
This also has an impact on netstat(1) output. Previously, dynamically
created ARP cache entries (RTF_STATIC flag is unset) were displayed as
part of the routing table display (-r). Now, they are only printed if
the -a option is given.
netinet/in.c, netinet/in_rmx.c:
When address is removed from an interface, also delete all routes that
point to this interface and address. Previously, for example, if you
changed the address on an interface, outgoing IP datagrams might still
use the old address. The only solution was to delete and re-add some
routes. (The problem is easily observed with the route(8) command.)
Note, that if the socket was already bound to the local address before
this address is removed, new datagrams generated from this socket will
still be sent from the old address.
PR: kern/20785, kern/21914
Reviewed by: wollman (the idea)
remove the concept of a 'maintainer' of our make. there really isn't a
need for any one committer to hold an exclusive lock or serve as a filter
for this code.
src/sys/modules/if_ef and possibly other things. I tested the build with
a make based on rev. 1.26, and it worked fine. Since I'm not particularly
inclined to figure out what's going on with this, it's probably prudent
just to back it out for now.
Found by: jkh
Suggested by: jhay
.endif statements but can't be placed in .elif. Basically, the problem
was that ParseSkipLine() didn't handle comments the same way that
ParseReadLine() did, and thus you had errors with comments that are on a
conditional line (i.e. "^.") rather than a non-conditional line.
MFC candidate for 4.3-STABLE and 3.5-STABLE.
PR: 25627
Bug found by: jhs
Fix submitted by: Seth Kingsley <sethk@osd.bsdi.com> (thanks!!)
characters. This should avoid unattractive wrapping for people who are
stuck in an 80x24 screen. :-)
PR: 22270
Submitted by: William Carrel <williamc@go2net.com>
list was cleared.
Rules with null suffixes would not be rebuilt when the suffixes were
added again.
Adding null suffix rules would fail when a rule for the same source was
declared before the suffix list was cleared.
PR: 23328, 24102
Reviewed by: will
Approved by: rwatson
1) Fix a bug where the recursion on prefixes where if recusrion failed
then the next attempt started too far along the string.
2) Up some internal limits that we were about to hit off.
3) Change the constness and signedness of some things and complete missing
prototypes.
4) Remove the readerror function 'cos it could print out the wrong
wrong file name. Replace it with more useful error messages.
5) Use sizeof when passing buffers to fgets.
6) Warn about empty prefix definitions.
Reviewed by: iedowse
fscale is a (64-bit) long. So just use a struct loadavg.
This fixes the recent failure of top on alphas:
top: sysctl(vm.loadavg...) failed: Cannot allocate memory
- use size_t for sizeof() so as to fix a few int/long warnings on alpha
Reviewed by: Thomas Moestl <tmoestl@gmx.net>
available via sysctl(). As a result, top should now be able to run without
setgid kmem.
Submitted by: Thomas Moestl <tmoestl@gmx.net>
Reviewed by: freebsd-audit
-E Interpret regular expressions followed by -regex and -iregex op-
tions as extended (modern) regular expressions rather than basic
regular expressions (BRE's). The re_format(7) manual page fully
describes both formats.
-iname pattern
Like -name, but the match is case insensitive.
-ipath pattern
Like -path, but the match is case insensitive.
-regex pattern
True if the whole path of the file matches pattern using regular
expression. To match a file named ``./foo/xyzzy'', you can use
the regular expression ``.*/[xyz]*'' or ``.*/foo/.*'', but not
``xyzzy'' or ``/foo/''.
-iregex pattern
Like -regex, but the match is case insensitive.
These are meant to be compatible with other find(1) implementations
such as GNU's or NetBSD's except regexp library differences.
Reviewed by: sobomax, dcs, and some other people on -current
Submitted by: Maxim Konovalov <maxim@macomnet.ru>
Silence a warning by renaming the 'pgtok' #define to 'vmstat_pgtok' so
as not to conflict with the 'pgtok' #define in sys/param.h
through the use of a new build directive, MACHINE_CPU, which contains a
list of the CPU generations/features for which optimizations are desired.
This feature will be extended to cover the ports tree in the future.
Currently OpenSSL provides optimizations for i386, i586 and i686-class
CPUs. Currently it has not been tested on an i386 or i486.
Teach make(1) to provide sensible defaults for MACHINE_CPU if it is not
defined (namely, the lowest common denominator CPU we support for each
architecture). Currently this is i386 for the i386 architecture and ev4
for the alpha. sys.mk also sets the variable as a last resort for
consistency with MACHINE_ARCH and bootstrapping from very old versions of
make.
Benchmarks show a significant speed increase even in the i386 case, with
additional improvements for i586 and i686 systems. For maximum performance
define MACHINE_CPU=i686 i586 i386 in /etc/make.conf.
Based on a patch submitted by: Mike Silbersack <silby@silby.com>
Reviewed by: current
revision 1.25. When evaluating the termination condition for the
iteration over all map entries, we must take care to use the kernel
versions of all pointers. The code was comparing a kernel pointer
to a pointer within a local variable, so the loop never terminated.
16 characters, only check the first 16 since that is all the kernel
records. This isn't ideal, but it is probably the best we can do.
Otherwise, "killall communicator-linux-4.76.bin" will not match
the process as the kernel only records "communicator-lin".
add missing .Xo/.Xc to the tags. This only worked due
to the off-by-one bug in the -hang lists, which I will
hopefully backport from the mdocNG shortly.
was in. This shall be MFC'd in about three days (probably not a good idea
to MFC the stylistic changes though - see below).
PR: 19978
Submitted by: Gerald Pfeifer <pfeifer@dbai.tuwien.ac.at>
Patch by: roam (slightly modified by me to use NULL not NIL)
modules (via pam_putenv). The following variables will never be set in
this fashion:
SHELL, HOME, LOGNAME, MAIL, CDPATH, IFS, PATH
any variable starting with `LD_'
. remove SYSV compatibility bits
. sort #include's
. ifdef unused code
. cleanup BDECFLAGS warnings
. fixed few typos in diagnostics messages
. style(9) fixes
as part of this cleanup I have changed all K&R declarations to ANSI style.
Main reason for doing that was great mix of declarations used here - clean
ASNI , clean K&R, ifdef'ed (both).
Reviewed by: ache (mostly)
Use tolower() rather than bit or-ing
Sanity check user specified printf() format
Exit when too many input files are given
Remove register from variables
Reviewed by: markm, imp
to be the same as -ragged in the current implementation) to
-ragged. With mdocNG, -filled displays produce the correct
output, formatted and justified to both margins.
string after each successful snprintf() call. This makes apply(1) work
*correctly*, although the whole snprintf() deal really should be redone.
Bug noted by: nectar (about 3 weeks ago)
is empty. There doesn't appear to be another easy way to do this.
mobile# mkdir foo
mobile# mkdir foo/bar
mobile# mkdir bar
mobile# find . -empty
./foo/bar
./bar
