Commit Graph

28538 Commits

Author SHA1 Message Date
Edward Tomasz Napierala
7a03d007cf Extend ICL to add receive offload methods. For software ICL backend
they are no-ops.

MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
2015-02-08 19:15:14 +00:00
Dmitry Chagin
5fea5a57b6 Add Neoway WM620 module ID.
MFC after:	1 Week
2015-02-08 11:55:29 +00:00
Edward Tomasz Napierala
d4b195d315 Make output of "iscsictl -v" and "ctladm islist -v" a little prettier
by capitalizing "None".

MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
2015-02-08 10:58:25 +00:00
Navdeep Parhar
b3d44a6800 cxgbe(4): tidy up some of the interaction between the Upper Layer
Drivers (ULDs) and the base if_cxgbe driver.

Track the per-adapter activation of ULDs in a new "active_ulds" field.
This was done pretty arbitrarily before this change -- via TOM_INIT_DONE
in adapter->flags for TOM, and the (1 << MAX_NPORTS) bit in
adapter->offload_map for iWARP.

iWARP and hw-accelerated iSCSI rely on the TOE (supported by the TOM
ULD).  The rules are:
a) If the iWARP and/or iSCSI ULDs are available when TOE is enabled then
   iWARP and/or iSCSI are enabled too.
b) When the iWARP and iSCSI modules are loaded they go looking for
   adapters with TOE enabled and enable themselves on that adapter.
c) You cannot deactivate or unload the TOM module from underneath iWARP
   or iSCSI.  Any such attempt will fail with EBUSY.

MFC after:	2 weeks
2015-02-08 09:28:55 +00:00
Navdeep Parhar
319f290030 cxgbe(4): adapter_full_init is always a synchronized operation.
MFC after:	1 week
2015-02-08 08:52:18 +00:00
Navdeep Parhar
d86a5ff917 cxgbe(4): a change to the synchronization rules within the the driver.
This is purely cosmetic because the new rules are already followed.

MFC after:	1 week
2015-02-08 08:42:45 +00:00
Adrian Chadd
692ad7ca94 Big wpi(4) overhaul! Not by me!
This is a sync against iwn(4) and openbsd.

- Add power management support;
- Add background scanning support;
- Fix few LORs;
- Handle rfkill switch state changes properly;
- Fix recovering after firmware failure;
- Add more error checking;
- Cleanup & disable by default debug output;
- Update macroses names;
- Other various fixes;
- Add IBSS support:
  - don't set data_ntries field for management frames;
- Add AHDEMO support:
    - fix padding;
- Sync eeprom functions;
- Use CMD_RXON_ASSOC where possible;
- Enable HW CCMP encryption/decryption for pairwise keys;
- Fix filter flags for CMD_RXON.

Tested (by submitter) - iwn 3945 NIC.  I have one somewhere; I'll
validate this later on and revert it if it's a problem.

Thanks!

PR:		197143
Submitted by:	Andriy Voskoboinyk <s3erios@gmail.com>
2015-02-07 23:11:38 +00:00
Enji Cooper
ee3a7d2fb7 Remove kdb_backtrace extern; get the definition for kdb_backtrace from
<sys/kdb.h> instead

Fix whitespace in WARN_ON macro definition

MFC after: 1 week
Reviewed by: np
Differential Revision: https://reviews.freebsd.org/D1799
Sponsored by: EMC / Isilon Storage Division
2015-02-07 21:29:17 +00:00
Edward Tomasz Napierala
5aabcd7c4e Tidy up; no functional changes.
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
2015-02-07 14:15:17 +00:00
Navdeep Parhar
cb6c101a86 cxgbe(4): fix a test made while enabling TOE.
MFC after:	1 week
2015-02-07 01:50:32 +00:00
John Baldwin
c869aa71f0 Use direct hardware access for internal requests for KCS and SMIC. In
particular, updates to the watchdog should no longer sleep.
- Add a new IPMI_IO_LOCK for low-level I/O access.  Use this for
  kcs_polled_request() and smic_polled_request().
- Add a new backend callback "ipmi_driver_request" to handle a driver
  request.  The new callback performs the request sychronously for KCS
  and SMIC.  SSIF still defers the work to the worker thread since the
  worker thread sleeps during request processing anyway.
- Allocate driver requests on the stack rather than using malloc().

Differential Revision:	https://reviews.freebsd.org/D1723
Tested by:	scottl
MFC after:	2 weeks
2015-02-06 16:45:10 +00:00
John Baldwin
64de80195b Add a new device control utility for new-bus devices called devctl. This
allows the user to request administrative changes to individual devices
such as attach or detaching drivers or disabling and re-enabling devices.
- Add a new /dev/devctl2 character device which uses ioctls for device
  requests.  The ioctls use a common 'struct devreq' which is somewhat
  similar to 'struct ifreq'.
- The ioctls identify the device to operate on via a string.  This
  string can either by the device's name, or it can be a bus-specific
  address.  (For unattached devices, a bus address is the only way to
  locate a device.)  Bus drivers register an eventhandler to claim
  unrecognized device names that the driver recognizes as a valid address.
  Two buses currently support addresses: ACPI recognizes any device
  in the ACPI namespace via its full path starting with "\" and
  the PCI bus driver recognizes an address specification of
  'pci[<domain>:]<bus>:<slot>:<func>' (identical to the PCI selector
  strings supported by pciconf).
- To make it easier to cut and paste, change the PnP location string
  in the PCI bus driver to output a full PCI selector string rather
  than 'slot=<slot> function=<func>'.
- Add a devctl(3) interface in libdevctl which provides a wrapper around
  the ioctls and is the preferred interface for other userland code.
- Add a devctl(8) program which is a simple wrapper around the requests
  supported by devctl(3).
- Add a device_is_suspended() function to check DF_SUSPENDED.
- Add a resource_unset_value() function that can be used to remove a
  hint from the kernel environment.  This is used to clear a
  hint.<driver>.<unit>.disabled hint when re-enabling a boot-time
  disabled device.

Reviewed by:	imp (parts)
Requested by:	imp (changing PCI location string)
Relnotes:	yes
2015-02-06 16:09:01 +00:00
Navdeep Parhar
85dc477798 cxgbe(4): Add a minimal if_cxl module that pulls in the real driver as
a dependency.  This ensures "ifconfig cxl<n> ..." does the right thing
even when it's run with no driver loaded.

if_cxl.ko is the tiniest module in /boot/kernel.

MFC after:	2 weeks
2015-02-06 01:10:04 +00:00
John Baldwin
a1d18b6615 Add the device ID for the AMT serial port on my Thinkpad T400.
MFC after:	1 week
2015-02-05 21:50:51 +00:00
Rui Paulo
bae1c14d6b vtvga: improve the device description. 2015-02-05 19:36:29 +00:00
Andrew Rybchenko
e1a3d10e9e sfxge: Add statistics for partially dropped TSO packets
Sponsored by:   Solarflare Communications, Inc.
Approved by:    gnn (mentor)
2015-02-05 12:10:23 +00:00
Andrew Rybchenko
0f999687bb sfxge: using 64-bit access for x86-64
Submitted by:   Artem V. Andreev <Artem.Andreev at oktetlabs.ru>
Sponsored by:   Solarflare Communications, Inc.
Approved by:    gnn (mentor)
2015-02-05 12:08:25 +00:00
Andrew Rybchenko
33d45dc5e4 sfxge: make lock names unique
Lock name should include interface name.
Tx queue and event queue lock name should include queue number.

Sponsored by:   Solarflare Communications, Inc.
Approved by:    gnn (mentor)
2015-02-05 11:39:15 +00:00
Andrew Rybchenko
d8e7a280bb sfxge: access statistics buffers under port lock
Allow access to statistics data not only from sysctl handlers.

Submitted by:   Boris Misenov <Boris.Misenov at oktetlabs.ru>
Sponsored by:   Solarflare Communications, Inc.
Approved by:    gnn (mentor)
2015-02-05 11:37:07 +00:00
Navdeep Parhar
a2355dd909 cxgbe(4): reserve id for iSCSI upper layer driver. 2015-02-05 08:52:20 +00:00
Edward Tomasz Napierala
674074da06 Don't call callout_drain() with iscsi mutex held; this fixes a warning
that was introduced recently.  While here, don't try to access is_terminating
without lock.

MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
2015-02-05 07:46:34 +00:00
Edward Tomasz Napierala
09f2b94bf4 Fix error handling.
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
2015-02-05 07:16:45 +00:00
Edward Tomasz Napierala
82babffba9 Make it possible to set (via iscsi.conf(5)) and query (via iscsictl -v)
initiator iSCSI offload.  Pass maximum data segment size supported by
chosen offload module to iscsid(8), and make iscsid(8) not try to negotiate
anything larger than that.

MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
2015-02-05 06:37:59 +00:00
Andrew Rybchenko
763cab7173 sfxge: Add macros to init, destroy, acquire, release and assert locks
Sponsored by:   Solarflare Communications, Inc.
Approved by:    gnn (mentor)
2015-02-04 20:03:57 +00:00
Andrew Rybchenko
7c00963a55 sfxge: Implement EFSYS_MEM_READ_BARRIER()
Sponsored by:   Solarflare Communications, Inc.
Approved by:    gnn (mentor)
2015-02-04 19:58:54 +00:00
Warner Losh
8b704a1c2b Fix typo
Submitted by: matteo@
2015-02-04 16:19:31 +00:00
Warner Losh
022abe003f Add comment about why checking for 0xff is OK. There's two bits in the
ISR that are normally clear. RST is one, though in some overflow cases
it can be set. RDC is only set when a remote DMA is finished from the
memory mapped memory to the transmit rings, which we poll fore in the
code with ED_LOCK around the operation that would set it.
2015-02-04 15:59:51 +00:00
Bryan Venteicher
d3ccddf3ce Generalized parts of the XEN timer code into a generic pvclock
KVM clock shares the same data structures between the guest and the host
as Xen so it makes sense to just have a single copy of this code.

Differential Revision: https://reviews.freebsd.org/D1429
Reviewed by:	royger (eariler version)
MFC after:	1 month
2015-02-04 08:26:43 +00:00
Warner Losh
234530168a Silence a coverity warning about ignoring a return value. We do, but
we also know that it "can't fail" given the single-threaded nature of
device enumeration. Go ahead and check it just in case, but add a
comment.

CID: 1009393
Sponsored by: Netflix, Inc
2015-02-03 18:59:52 +00:00
Ed Maste
d050b80397 Remove duplicate intel_fbc_enabled prototype
Fixed upstream in Linux commit 7ff0ebcc1e30e3216c8c62ee71f59ac830b10364

Differential Revision:	https://reviews.freebsd.org/D1762
Reviewed by:	hselasky, kib
Sponsored by:	The FreeBSD Foundation
2015-02-03 15:41:09 +00:00
Konstantin Belousov
98173b7fa7 If the vm_page_alloc_contig() failed in the ttm page allocators, do
what other callers of vm_page_alloc_contig() do, retry after
vm_pageout_grow_cache().

Sponsored by:	The FreeBSD Foundation
2015-02-03 13:45:06 +00:00
Konstantin Belousov
668259c84d Do not access gmbus_ports array past its end.
Reported and tested by:	hselasky
Sponsored by:	The FreeBSD Foundation
2015-02-03 13:43:03 +00:00
Konstantin Belousov
35669caf93 Followup to r278147. Two more sign errors.
Noted by:	hps
Sponsored by:	The FreeBSD Foundation
2015-02-03 11:34:18 +00:00
Konstantin Belousov
cbc34301ba Fix sign for the error code returned from the driver-specific code.
Noted by:	hps
Sponsored by:	The FreeBSD Foundation
2015-02-03 10:46:07 +00:00
Konstantin Belousov
ae18989eb9 Do not attach to the unsupported chipsets, unless magic tunable is
frobbed.

Sponsored by:	The FreeBSD Foundation
2015-02-03 10:30:41 +00:00
Luiz Otavio O Souza
dbdb12056d Register the GPIO controller device reference on xref table for FDT systems. 2015-02-02 19:22:34 +00:00
Hans Petter Selasky
c3871e6426 Separate out detection of prevent and allow medium removal quirk.
PR:		185747
MFC after:	1 week
2015-02-02 18:20:10 +00:00
Alexander Motin
4b0e5c9ef4 Missed addition to r278098.
MFC after:	1 week
2015-02-02 16:06:23 +00:00
Alexander Motin
bebf6a8572 Add some fields and constants from RFC7144.
MFC after:	1 week
2015-02-02 15:59:17 +00:00
Hans Petter Selasky
8b1ce3297a Optimise allocation of USB DMA structures. By default don't double map
allocations if only one element should be allocated per page
cache. Make one allocation per element compile time configurable. Fix
a comment while at it.

Suggested by:	ian @
MFC after:	1 week
2015-02-02 11:32:15 +00:00
Hans Petter Selasky
add9e3e5d3 Section 3.2.9 in the XHCI specification about control transfers says
that we should use a normal-TRB if there are more TRBs extending the
data-stage TRB. Add a dedicated state bit to the internal USB transfer
flags to handle this case.

Reported by:	Kohji Okuno <okuno.kohji@jp.panasonic.com>
MFC after:	1 week
2015-02-02 11:06:41 +00:00
Steven Hartland
b1877a0b39 Add a quirk to limit AHCI MSI vectors to one
In 10.1-RELEASE the default number of MSI vectors used was changed from one
to as many vectors as the HW supports.

This change resulted in an ahci timeouts regression when running on AMD
SB7x0/SB8x0/SB9x0 hardware, so its now limited to 1 MSI by default using
this new quirk.

MFC after:	2 weeks
Sponsored by:	Multiplay
2015-02-01 20:00:08 +00:00
Dimitry Andric
5d3fc1ff66 Constify a number of accesses in drm2's radeon drivers to avoid
-Wcast-qual warnings.  No functional change.

Reviewed by:	dumbbell
MFC after:	3 days
Differential Revision: https://reviews.freebsd.org/D1727
2015-01-31 22:18:52 +00:00
Luiz Otavio O Souza
7836352b50 Implement GPIO_GET_BUS() method for all GPIO drivers.
Add helper routines to deal with attach and detach of gpiobus and gpioc
devices that are common to all drivers.
2015-01-31 19:32:14 +00:00
Ian Lepore
8535fe7d28 Fix whitespace glitch from prior comit. 2015-01-31 18:57:45 +00:00
Luiz Otavio O Souza
2b8b8321e3 Implement a new method to retrieve the gpiobus reference from a GPIO
controller.

The gpiobus is responsible to keep track of the used pins and serialize
the access to pins.

Some of these features are important to devices that do not descend
directly from gpiobus and as such cannot make use of its features (one
classic example is gpioc that is attached to the GPIO controller and could
not, until now, make use of the gpiobus locking).
2015-01-31 15:50:19 +00:00
Edward Tomasz Napierala
872d2d9276 Use proper module name in MODULE_VERSION().
Sponsored by:	The FreeBSD Foundation
2015-01-31 15:22:45 +00:00
Edward Tomasz Napierala
a6ad7194e0 Drop unneeded include.
Sponsored by:	The FreeBSD Foundation
2015-01-31 15:21:54 +00:00
Dimitry Andric
620d4f3c0b Fix a bunch of -Wcast-qual warnings in sys/dev/usb/input/uhid.c, by
using __DECONST.  No functional change.

Reviewed by:	hselasky
Differential Revision: https://reviews.freebsd.org/D1743
2015-01-31 14:18:46 +00:00
Edward Tomasz Napierala
9e46a88722 Add two files missed in r277963.
Sponsored by:	The FreeBSD Foundation
2015-01-31 08:03:56 +00:00