Commit Graph

207225 Commits

Author SHA1 Message Date
Simon J. Gerraty
6c770d664f Import bmake-20151220 2015-12-25 08:09:48 +00:00
Alexander Motin
a4f43c01c0 Clear virtual port's port database when disabling it.
Previously it was done only on full chip reinit, that caused old ports
resurrect in case of virtual port reenabling.
2015-12-25 03:44:29 +00:00
Adrian Chadd
d5c2c0134b Add initial configuration files for the MT7620 and RT5350 SoCs.
These are all works in progress.  Notably - no wifi support just yet!

I've booted the MT7620 on a TP-Link Archer C2 via tftpboot.

Submitted by:	Stanislav Galabov <sgalabov@gmail.com>
2015-12-25 00:58:41 +00:00
Adrian Chadd
43747185a0 Add missing device rename. 2015-12-24 22:27:00 +00:00
Enji Cooper
30dfa264d0 Remove unused function act_getkernstring
This fixes a clang -Wunused warning

Differential Revision: https://reviews.freebsd.org/D4697
MFC after: 1 week
Reported by: Jenkins
Reviewed by: araujo, bapt
Sponsored by: EMC / Isilon Storage Division
2015-12-24 22:22:02 +00:00
Konstantin Belousov
66fa67c7f7 Do not compile ARMv6 instructions on ARMv4/v5. Although clang is fine
with mrrc, gcc is not.  The disabled code is not executed on ARMv4
anyway.

Reported and reviewed by:	ian
Sponsored by:	The FreeBSD Foundation
2015-12-24 22:13:52 +00:00
Patrick Kelsey
281a0fd4f9 Implementation of server-side TCP Fast Open (TFO) [RFC7413].
TFO is disabled by default in the kernel build.  See the top comment
in sys/netinet/tcp_fastopen.c for implementation particulars.

Reviewed by:	gnn, jch, stas
MFC after:	3 days
Sponsored by:	Verisign, Inc.
Differential Revision:	https://reviews.freebsd.org/D4350
2015-12-24 19:09:48 +00:00
Ed Maste
18010b98c2 rtld: remove old XXX comment missed in r35529
Sponsored by:	The FreeBSD Foundation
2015-12-24 18:53:17 +00:00
Adrian Chadd
dec1abaec3 [rt] add support for the RT5350 and MT7620 SoCs.
This is a work in progress; bringing the interface down stops further
use.  It only happens on RT5350/MT7620.

This is based on work by Alexander A. Mityaev <sansan@adm.ua>.

Submitted by:	Stanislav Galabov <galabov@gmail.com>
2015-12-24 18:41:16 +00:00
Adrian Chadd
ba1ae59a17 [rt305x] Add initial RT5350 and MT7620 glue.
* Add in chipset awareness to the obio bus layout (ie, which devices are
  where);
* Add in some USB OTG changes to be aware of the newer stuff;
* Add in a configurable primary console - some chips use the normal UART,
  some use UARTLITE.

Tested (by Stanislav);

* RT3050 (NFS)
* RT5350 (NFS, MFS)
* MT7620 (USB)

Submitted by:	Stanislav Galabov <sgalabov@gmail.com>
2015-12-24 18:40:10 +00:00
Adrian Chadd
f9133e1d31 [MT7620] add ehci/ohci USB support.
The newer chips don't use OTG; they're more traditional USB.

Submitted by:	Stanislav Galabov <sgalabov@gmail.com>
2015-12-24 18:36:08 +00:00
Adrian Chadd
0f4da49e43 [MT7620] add SPI device support.
Submitted by:	Alexander A. Mityaev <sansan@adm.ua>
2015-12-24 18:34:46 +00:00
Adrian Chadd
f3213f44b2 [rt305x] add PCI bus / resource allocation code for the MT7620.
This is based on the sys/arm/mv/ pci resource/allocation code.

Submitted by:	Stanislav Galabov <galabov@gmail.com>
2015-12-24 18:33:08 +00:00
Adrian Chadd
c40db2e376 [rt305x] add register space definitions for later generation chips.
This adds definitions for the MT5350 and MT7620 SoCs.

Submitted by:	Stanislav Galabov <galabov@gmail.com>
2015-12-24 18:31:55 +00:00
Adrian Chadd
1bbf40fab5 [rt305x] Prepare for the upcoming regime change - add RT305x options.
Submitted by:	Stanislav Galabov <sgalabov@gmail.com>
2015-12-24 18:30:04 +00:00
Sean Bruno
037985317a Fix NO INET6 build broken at svn r292674
Reported by: ohartman@zedat.fu-berlin.de
2015-12-24 17:05:25 +00:00
Bernard Spil
c77e464aea Update mentors for brnrd
- Remove vsevolod as mentor for brnrd
  - Add feld as mentor for brnrd

Reviewed by:	koobs (mentor), vsevolod (mentor p.t.), feld (mentor h.t.)
Approved by:	koobs (mentor)
Differential Revision:	https://reviews.freebsd.org/D4702
2015-12-24 16:51:03 +00:00
Jeremie Le Hen
a8f3e8d264 Replace all whitespaces between port name and number with tabs, 2015-12-24 16:35:28 +00:00
Adrian Chadd
8fa95ba8ff Flesh out some build time configuration options for the realtek/mediatek
ports.

The sys/mips/rt305x/ code currently has these hard-coded with a comment
to make them configurable; this is the first step towards that.

Submitted by:	Stanislav Galabov <sgalabov@gmail.com>
2015-12-24 15:58:33 +00:00
Adrian Chadd
d06ccd84b3 Begin the initial support for the mips1004kc core.
* add build option;
* add initial coherence manager config register bits;
* use the right hazard instruction (ehb);
* add page attributes.

Tested:

* MT7621A SoC (not yet in-tree)

Submitted by:	Stanislav Galabov <sgalabov@gmail.com>
2015-12-24 15:52:21 +00:00
Ruslan Bukin
4b1859c0e9 Add support for RISC-V architecture.
Reviewed by:	andrew, kib
Sponsored by:	DARPA, AFRL
Sponsored by:	HEIF5
Differential Revision:	https://reviews.freebsd.org/D4679
2015-12-24 15:47:51 +00:00
Alexander Motin
a46709e2ab Some polishing for command timeouts handling. 2015-12-24 14:53:29 +00:00
Sergey Kandaurov
e62b9bca9a Fixed comment placement.
Before r12296, this comment described the udp_recvspace default value.

Spotted by:	ru
Sponsored by:	Nginx, Inc.
2015-12-24 13:57:43 +00:00
Baptiste Daroussin
1be9a78b26 Reduce zfs utilities overlinking 2015-12-24 11:56:37 +00:00
Baptiste Daroussin
8c18e026ba camadd does not require linking to libsbuf or libbsdxml directly 2015-12-24 11:43:32 +00:00
Baptiste Daroussin
e05c3a9f6a Since removal of oldnfs support linking to kvm is not needed anymore 2015-12-24 11:41:21 +00:00
Baptiste Daroussin
fbb3c99f70 Reduce overlinking 2015-12-24 11:35:42 +00:00
Baptiste Daroussin
1921045de0 Reduce overlinking
ifconfig does not need libbsdxml and libsbuf only lib80211 needs it
2015-12-24 11:30:29 +00:00
Andrew Turner
2245b38f73 Ads support to the xhci pci attachment to use MSI-X interrupts when
available. As with MSI interrupts these can be disabled by setting
hw.usb.xhci.msix to 0 in the loader.

MSI-X interrupts are needed on some hardware, for example the Cavium
ThunderX only supports them, and with this we don't fall back to polling.

PR:		204378
Reviewed by:	hselasky, jhb
MFC after:	1 week (after r292669)
Sponsored by:	ABT Systems Ltd
Differential Revision:	https://reviews.freebsd.org/D4698
2015-12-24 09:40:29 +00:00
John Baldwin
9beae9a046 Fix remaining direct tests of the carry flag in the v86 %eflags via a
magic number to use V86_CY() instead.  These should have been fixed as
part of the cleanup in r226746 but were missed.

The md5 sums of the object files were unchanged, so there should be no
functional change.

PR:		205424
Submitted by:	Alexander Kuleshov <kuleshovmail@gmail.com>
MFC after:	1 week
2015-12-24 06:22:41 +00:00
Adrian Chadd
67f670190f Add missing \n.
Otherwise you end up with:

Cache info:
  picache_stride    = 4096
  picache_loopcount = 16
  pdcache_stride    = 4096
  pdcache_loopcount = 8
cpu0: MIPS Technologies processor v80.150
  MMU: Standard TLB, 32 entries (4K 16K 64K 256K 1M 16M 64M 256M pg sizes)
  L1 i-cache: 4 ways of 512 sets, 32 bytes per line
  L1 d-cache: 4 ways of 256 sets, 32 bytes per line
  L2 cache: disabled  Config1=0xbee3519e<PerfCount,WatchRegs,MIPS16,EJTAG>
  Config2=0x80000000
  Config3=0x2420

Tested:

* MT7620 SoC
2015-12-24 04:37:19 +00:00
Justin Hibbits
b3936ebe07 Extend Book-E to support >4GB RAM
Summary:
With some additional changes for AIM, that could also support much
larger physmem sizes.  Given that 32-bit AIM is more or less obsolete, though,
it's not worth it at this time.

Differential Revision: https://reviews.freebsd.org/D4345
2015-12-24 04:30:15 +00:00
Navdeep Parhar
1e86840331 MFP r291227, r291228, and r292618.
r291227:
s/is->is_conn/ic to shorten things a bit.

r291228:
Do not generate PDUs with payload greater than max_data_segment_length.

It is perhaps preferable to have a separate limit for send instead of
reusing the receive limit.  I'll discuss with trasz@ and mav@ before
pulling this into head.

r292618:
Add comment to go with r291228.
2015-12-24 02:35:59 +00:00
Warner Losh
3526f66fc2 Add quotes to prevent syntax errors on boot. 1.freebsd.pool.ntp.org
isn't a very popular command :)
2015-12-24 02:02:05 +00:00
Warner Losh
6e0601e970 Move creation of rc.conf to earlier so it winds up in /conf/boot/etc
With this change we mostly boot w/o errors on RPi-B for an
image cross built w/o privs. Other systems to follow.

Release Notes: Yes
2015-12-24 01:48:40 +00:00
Jonathan T. Looney
d3ee0a15a4 Only allow one PT_INTERP ELF program header. This also fixes a potential
memory leak for interp_buf.

Differential Revision:	https://reviews.freebsd.org/D4692
Reviewed by:	kib
MFC after:	2 weeks
Sponsored by:	Juniper Networks
2015-12-24 00:58:11 +00:00
Sean Bruno
a9ca1c79c6 ixgbe(4): Update to version 3.1.13-k
Add support for two new devices:  X552 SFP+ 10 GbE, and the single port
version of X550T.

Submitted by:	erj
Reviewed by:	gnn
Sponsored by:	Intel Corporation
Differential Revision:	https://reviews.freebsd.org/D4186
2015-12-23 22:45:17 +00:00
Sean Bruno
7144d5cbc5 Fixup native-xtools target for poudriere cross build jails after svn
r291955 by excluding all debug files.

Reported by:	swills

Reviewed by:	emaste
2015-12-23 21:55:54 +00:00
Sean Bruno
16f8a79b72 Add support for sysctl knobs to live tune the tx packet processing limits
in igb and fix a wrap-around bug.

Reviewed by:	hiren
Obtained from:  Jason (j@nitrology.com)
MFC after:	2 weeks
Sponsored by:	LimeLight Networks
Differential Revision:	https://reviews.freebsd.org/D4039
2015-12-23 21:54:05 +00:00
John Baldwin
ce204e1bd8 Add accessor methods to fetch the BAR holding the MSI-X table and PBA.
While here, explicitly note the requirement that the BAR(s) must be
allocated prior to calling pci_alloc_msix().

Reviewed by:	andrew, emaste
MFC after:	1 week
Differential Revision:	https://reviews.freebsd.org/D4688
2015-12-23 21:51:10 +00:00
John Baldwin
9e8d8b4b0c Move shared variables from {amd64,i386}/initcpu.c to x86/identcpu.c.
While here, move the common bits of <machine/cputypes.h> to
<x86/cputypes.h> as well.

Reviewed by:	kib
Differential Revision:	https://reviews.freebsd.org/D4670
2015-12-23 21:41:42 +00:00
Enji Cooper
159a783fdf Increase the timeout for resolv_test from the default (300 seconds) to
450 seconds

This is required on slower network connections, and on older releases
(stable/10 seems to be slower as far as name resolution goes.. not sure
why yet).

Remove an outdated comment in the Makefile from when I was working on
this code over a year ago on github

MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
2015-12-23 18:48:32 +00:00
Andrew Turner
06ef48781d Be stricter on which functions we can probe with FBT. We now only check the
first instruction to see if it's either a pushm with lr, or a sub with sp.
The former is the common case, with the latter used with va_args.

This removes 12 probes. These are all hand-written assembly, with a few C
functions with no stack usage.

Submitted by:	Howard Su <howard0su@gmail.com>
Differential Revision:	https://reviews.freebsd.org/D4419
2015-12-23 17:54:19 +00:00
Enji Cooper
b59f7a7ad8 Remove redundant declarations in sys/x86/xen which are now handled in other sys/x86
headers

Differential Revision: https://reviews.freebsd.org/D4685
X-MFC with: r291949
Sponsored by: EMC / Isilon Storage Division
2015-12-23 17:43:55 +00:00
Enji Cooper
05ff465524 Remove redundant vmbus_select_outgoing_channel declaration already handled
in include/hyperv.h

This unbreaks the gcc 4.2.1 kernel build of hyperv

Differential Revision: https://reviews.freebsd.org/D4684
MFC after: 3 days
Reviewed by: royger
Sponsored by: EMC / Isilon Storage Division
2015-12-23 17:37:30 +00:00
Maksim Yevmenkin
74cc817d85 - grab ng_btsocket_l2cap_sockets_mtx lock in
ng_btsocket_l2cap_process_l2ca_enc_change()
  before calling ng_btsocket_l2cap_pcb_by_cid();

- handle possible NULL value returned from
  ng_btsocket_l2cap_pcb_by_cid();

Submitted by:	Hans Petter Selasky; hps at selasky dot org
MFC after:	1 week
2015-12-23 16:32:04 +00:00
Andrew Turner
91569f1f38 Increase the size and alignment of the setjmp buffer. This will allow for
possible future CPU extentions with larger registers.

jmp_buf's size and alignment are baked into the ABI of third party libraries
and thus are very hard to change later so it is best to waste a small amount
of space now.

Reviewed by:	brooks
Differential Revision:	https://reviews.freebsd.org/D3956
2015-12-23 15:22:44 +00:00
Ed Maste
e7beaf9968 Install ld also as ld.bfd, for use with cc -fuse-ld=bfd
PR:		205409 [exp-run]
MFC after:	1 week
Relnotes:	Yes
Sponsored by:	The FreeBSD Foundation
2015-12-23 14:31:26 +00:00
Bjoern A. Zeeb
bf72bf1281 Remove superfluous return (1) missed in r292601.
Reported by:	Matthew D. Fuller (fullermd over-yonder.net),
		Kevin Bowling (kevin.bowling kev009.com)
MFC after:	13 days
X-MFC with:	r292601
Sponsored by:	The FreeBSD Foundation
2015-12-23 10:23:47 +00:00
Baptiste Daroussin
9cd69d502c Report an error if zdb cannot initialize zfs
If the zfs module is not present and not loadable, report an error
to the user instead of crashing

Reviewed by:	mahrens
Sponsored by:	Gandi.net
Differential Revision:	https://reviews.freebsd.org/D4691
2015-12-23 10:20:46 +00:00