This looks a little bit differently than the forth version for the time
being, just to get off the ground- rather than a paging system, it's
implemented as a simple carousel like the kernel selector.
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D14436
Having these compiled into the module causes the kobj method descriptors
to be resolved incorrectly (by the compile-time linker instead of the
kernel linker), which then leads to hours of frustrating debugging.
For the benefit of lualoader, add all bootenvs to environment when
init_zfs_bootenv is invoked. All of the boot environment logic can then be
implemented in pure lua, rather than going back and forth with C to
implement paging.
This stores all boot environments in bootenvs[idx] and the final count of
bootenvs in bootenvs_count.
While here, make a copy of currdev for init_zfs_bootenv since it will be
modifying it and the caller may not necessarily want that. Some of the logic
was shifted around so that the 'currdev' pointer remains at the beginning of
the string and 'beroot' is moved around as needed to modify it or ultimately
store it in zfs_be_root.
The original zfs_bootenv that this was copied from will be able to go away
only if/when forth eventually goes away.
Tested with: lualoader (and local changes to add boot env. support)
Tested with: forth
Reviewed by: cem (earlier version), imp
Differential Revision: https://reviews.freebsd.org/D14435
The Makefile gives the impression that ext2fs and msdos were excluded
(they weren't) and that you could exclude cd9660 and ufs support (you
couldn't). Allow those to be excluded.
We need to look, in the future, at trimming the number of supported
filesystems, and this will make that easier.
There's no reason to have multiple copies of lszfs and
reloadbe. Consolidate them into one location. Also ldi_get_size is the
same everywhere (except sparc64). Make it the same everywhere as the
common definition is more general and will work on spar64.
With all values identical it was possible for Var() to return a negative
value due to limited floating point precision, resulting in "nan"
reported as Stddev.
Variance cannot actually be negative, so just return 0. We can later
investigate alternate algorithms for calculating variance to reduce the
effect of catastrophic cancellation here.
Reported by: Arshan Khanifar <arshankhanifar_gmail.com>
Approved by: phk
Sponsored by: The FreeBSD Foundation
illumos/illumos-gate@95643f75d295643f75d2https://www.illumos.org/issues/8520
lzc_rollback_to() should support rolling back to a clone's origin.
The current checks in zfs_ioc_rollback() would not allow that because the
origin snapshot belongs to a different filesystem.
The overly restrictive check was introduced in 7600, but it was not a
regression as none of the existing tools provided a way to rollback to the
origin.
https://www.illumos.org/issues/7198
EINVAL is returned when a dataset does not have any snapshots, so there is
nothing to roll back to.
Although the code in zfs_do_rollback checks for that condition in advance, it's
still possible that the snapshot(s) gets removed after the check and before the
rollback sync task is executed.
At the moment zfs command would crash when that happens.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Andriy Gapon <avg@FreeBSD.org>
MFC after: 2 weeks
illumos/illumos-gate@95643f75d295643f75d2https://www.illumos.org/issues/8520
lzc_rollback_to() should support rolling back to a clone's origin.
The current checks in zfs_ioc_rollback() would not allow that because the
origin snapshot belongs to a different filesystem.
The overly restrictive check was introduced in 7600, but it was not a
regression as none of the existing tools provided a way to rollback to the
origin.
https://www.illumos.org/issues/7198
EINVAL is returned when a dataset does not have any snapshots, so there is
nothing to roll back to.
Although the code in zfs_do_rollback checks for that condition in advance, it's
still possible that the snapshot(s) gets removed after the check and before the
rollback sync task is executed.
At the moment zfs command would crash when that happens.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Andriy Gapon <avg@FreeBSD.org>
illumos/illumos-gate@f864f99efef864f99efehttps://www.illumos.org/issues/8997
When dmu_tx_assign is called from zil_lwb_write_issue, it's possible
for either ERESTART or EIO to be returned.
If ERESTART is returned, this will cause an assertion to fail directly
in zil_lwb_write_issue, where the code assumes the return value is
EIO if dmu_tx_assign returns a non-zero value. This can occur if the
SPA is suspended when dmu_tx_assign is called, and most often occurs
when running zloop.
If EIO is returned, this can cause assertions to fail elsewhere in the
ZIL code. For example, zil_commit_waiter_timeout contains the
following logic:
lwb_t *nlwb = zil_lwb_write_issue(zilog, lwb);
ASSERT3S(lwb->lwb_state, !=, LWB_STATE_OPENED);
In this case, if dmu_tx_assign returned EIO from within
zil_lwb_write_issue, the lwb variable passed in will not be issued
to disk. Thus, it's lwb_state field will remain LWB_STATE_OPENED and
this assertion will fail. zil_commit_waiter_timeout assumes that after
it calls zil_lwb_write_issue, the lwb will be issued to disk, and
doesn't handle the case where this is not true; i.e. it doesn't handle
the case where dmu_tx_assign returns EIO.
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Prakash Surya <prakash.surya@delphix.com>
MFC after: 3 weeks
This matches forth behavior. Hitting "6" when autobooting at the welcome
menu will now take you directly to the "Boot Options" menu.
We likely have some slight optimizations we should make, like not checking
autoboot every time we open a new menu and things of this nature. Further
work will go towards this end.
illumos/illumos-gate@f864f99efef864f99efehttps://www.illumos.org/issues/8997
When dmu_tx_assign is called from zil_lwb_write_issue, it's possible
for either ERESTART or EIO to be returned.
If ERESTART is returned, this will cause an assertion to fail directly
in zil_lwb_write_issue, where the code assumes the return value is
EIO if dmu_tx_assign returns a non-zero value. This can occur if the
SPA is suspended when dmu_tx_assign is called, and most often occurs
when running zloop.
If EIO is returned, this can cause assertions to fail elsewhere in the
ZIL code. For example, zil_commit_waiter_timeout contains the
following logic:
lwb_t *nlwb = zil_lwb_write_issue(zilog, lwb);
ASSERT3S(lwb->lwb_state, !=, LWB_STATE_OPENED);
In this case, if dmu_tx_assign returned EIO from within
zil_lwb_write_issue, the lwb variable passed in will not be issued
to disk. Thus, it's lwb_state field will remain LWB_STATE_OPENED and
this assertion will fail. zil_commit_waiter_timeout assumes that after
it calls zil_lwb_write_issue, the lwb will be issued to disk, and
doesn't handle the case where this is not true; i.e. it doesn't handle
the case where dmu_tx_assign returns EIO.
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Prakash Surya <prakash.surya@delphix.com>
illumos/illumos-gate@a6c1eb3c08a6c1eb3c08https://www.illumos.org/issues/8731
annotate_ecksum() asserts that nui64s, calculated as nui64s = size / sizeof
(uint64_t), is not greater than UINT16_MAX.
This restriction is needed because histograms of incorrectly set and cleared
bits have 16 bit counters and if the buffer consists of too many 64-bit words,
then a counter can potentially overflow producing an incorrect result.
When the largest buffer size was 128KB the greatest value of nui64s was 16K,
well within the limit.
But now we have support for large buffers and for buffer sizes of 512KB and
above the restriction is violated.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Andriy Gapon <avg@FreeBSD.org>
MFC after: 2 weeks
illumos/illumos-gate@a6c1eb3c08a6c1eb3c08https://www.illumos.org/issues/8731
annotate_ecksum() asserts that nui64s, calculated as nui64s = size / sizeof
(uint64_t), is not greater than UINT16_MAX.
This restriction is needed because histograms of incorrectly set and cleared
bits have 16 bit counters and if the buffer consists of too many 64-bit words,
then a counter can potentially overflow producing an incorrect result.
When the largest buffer size was 128KB the greatest value of nui64s was 16K,
well within the limit.
But now we have support for large buffers and for buffer sizes of 512KB and
above the restriction is violated.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Andriy Gapon <avg@FreeBSD.org>
When processor enters power-save state it releases resources shared with other
cpu threads which makes other cores working much faster.
This patch also implements saving and restoring registers that might get
corrupted in power-save state.
Submitted by: Patryk Duda <pdk@semihalf.com>
Obtained from: Semihalf
Reviewed by: jhibbits, nwhitehorn, wma
Sponsored by: IBM, QCM Technologies
Differential revision: https://reviews.freebsd.org/D14330
binary mode user-space emulation layer. This is a regression issue after
r328436, when LinuxKPI character devices started to use DTYPE_DEV in
the "f_type" field of the associated file structure(s).
MFC after: 3 days
Found by: Johannes Lundberg <johalun0@gmail.com>
Sponsored by: Mellanox Technologies
Add function which can store RTC values to OPAL.
Submitted by: Wojciech Macek <wma@semihalf.org>
Obtained from: Semihalf
Sponsored by: IBM, QCM Technologies
Allow "name" entries to be simple strings, instead of just functions. We
know whether we support colors or not by the time any of this is setup, so
all menu names that are basically static with colors sprinkled in are good
candidates for simplification.
Also simplify "func" in many cases where it's just invoking another function
with no arguments. The downside to this simplification is that the functions
called can no longer be trivially replaced by a local module. The upside is
that it removes another layer of indirection that we likely don't need.
These can be re-evaluated later if a compelling argument is raised, on a
case-by-case basis, for replacement.
The intent here is to abstract away the name of the default menu. The
default menu is still the welcome menu, but this detail doesn't need to
matter to things outside of the menu module. You may change the default
menu, but one would need to modify a specific menu.
Summary:
This compartmentalizes the CPU-specific trap components into its own
function, rather than littering the general printtrap() with various checks.
This will let us replace a series of #ifdef's with a runtime conditional check
in the future.
Reviewed By: nwhitehorn
Differential Revision: https://reviews.freebsd.org/D14416
illumos/illumos-gate@3f7978d02b3f7978d02bhttps://www.illumos.org/issues/8081
zdb(8) is full of minor problems that generate compiler warnings. On FreeBSD,
which uses -WError, the only way to build it is to disable all compiler
warnings. This makes it much harder to detect newly introduced bugs. We should
cleanup all the warnings.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Alan Somers <asomers@gmail.com>
Provide a way for out-of-tree users of lualoader to patch into the loader
system without having to modify our distributed scripts.
Do note that we can't really offer any API compatibility guarantees at this
time due to the evolving nature of lualoader right now.
This still has some utility as local modules may add commands at the loader
prompt without relying heavily on lualoader features- this specific
functionality is less likely to change without more careful consideration.
Reviewed by: cem (earlier version)
Differential Revision: https://reviews.freebsd.org/D14439
I can't find any good reason these aren't enabled, so enable them.
The silent runs will only return false on actual parse errors, so it's ok to
be loud about those failures.
This was also a convenience convention (for me) that is not very lua-tic.
Drop it.
I've maintained some parentheses where I'd prefer them, for example,
'if x or y or (z and w) then', but these situations are far and few between.
This was previously chosen out of convenience, as we had a mixed style and
needed to be consistent. I started learning Lua on Friday, so I switched
everything over. It is not a very lua-nic convention, though, so drop it.
Excessive parenthesizing around conditionals is next on the chopping block.
illumos/illumos-gate@5f10ef697f5f10ef697fhttps://www.illumos.org/issues/6396
LVM = SVM = Solaris Volume Manager
dead code and not using with ZFS based platform.
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Reviewed by: Toomas Soome <tsoome@me.com>
Approved by: Hans Rosenfeld <rosenfeld@grumpf.hope-2000.org>
Author: Yuri Pankov <yuri.pankov@nexenta.com>
When attempting to mount a non-directory which exists, return ENOTDIR instead
of ENOENT. If stat() or statfs() failed, don't pass part of the invalid
(struct statfs) to ex_search(). In that same case, preserve the value of "bad"
rather than overwriting with EACCES.
Submitted by: Bruce Leverett (Panasas)
Reviewed by: rmacklem
MFC after: 1 week
Sponsored by: Panasas
Differential Revision: https://reviews.freebsd.org/D14438
illumos/illumos-gate@7855d95b307855d95b30https://www.illumos.org/issues/7446
Since we support whole-disk configuration for boot pool, we also will need
whole disk support with UEFI boot and for this, zpool create should create efi-
system partition.
I have borrowed the idea from oracle solaris, and introducing zpool create -
B switch to provide an way to specify that boot partition should be created.
However, there is still an question, how big should the system partition be.
For time being, I have set default size 256MB (thats minimum size for FAT32
with 4k blocks). To support custom size, the set on creation "bootsize"
property is created and so the custom size can be set as: zpool create B -
o bootsize=34MB rpool c0t0d0
After pool is created, the "bootsize" property is read only. When -B switch is
not used, the bootsize defaults to 0 and is shown in zpool get output with
value ''. Older zfs/zpool implementations are ignoring this property.
https://www.illumos.org/rb/r/219/
Reviewed by: Andrew Stormont <andyjstormont@gmail.com>
Reviewed by: Yuri Pankov <yuri.pankov@gmail.com>
Approved by: Dan McDonald <danmcd@kebe.com>
Author: Toomas Soome <tsoome@me.com>
This commit makes no sense for FreeBSD, that is why I blocked the option,
but it should be good to stay closer to upstream.
Track the latest value we've set an environment variable to, and only
restore those that are unchanged from that.
This gives us some leeway to make sure we're not clobbering variables
overwritten by menu changes.
