tree parsing opt-out rather than opt-in. All FDT-based systems as well as
PowerPC systems with real Open Firmware use the CHRP-derived binding that
includes it, which makes SPARC the odd man out here. Making it opt-out
avoids astonishment on new platform bring up.
information on what the core supports. In most cases these will be
identical across most CPUs in the SoC, however there may be the case where,
with a big.LITTLE setup they may differ. In this case we print the
decoded data on all CPUs.
Reviewed by: kib
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D4725
possible future CPU extentions with larger registers.
jmp_buf's size and alignment are baked into the ABI of third party libraries
and thus are very hard to change later so it is best to waste a small amount
of space now.
Reviewed by: brooks
Differential Revision: https://reviews.freebsd.org/D3956
the #address-cells property set. For this we need to read more data before
the parent interrupt description.
this is only enabled on arm64 for now as it's not quite compliant with the
ePAPR spec. We should use a default of 2 where the #address-cells property
is missing, however this will need further testing across architectures.
Obtained from: ABT Systems Ltd
Sponsored by: SoftIron Inc
Differential Revision: https://reviews.freebsd.org/D4518
clock_gettime(2) on ARMv7 and ARMv8 systems which have architectural
generic timer hardware. It is similar how the RDTSC timer is used in
userspace on x86.
Fix a permission problem where generic timer access from EL0 (or
userspace on v7) was not properly initialized on APs.
For ARMv7, mark the stack non-executable. The shared page is added for
all arms (including ARMv8 64bit), and the signal trampoline code is
moved to the page.
Reviewed by: andrew
Discussed with: emaste, mmel
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D4209
atomic functions where they are almost identical, or have acquire/release
semantics.
While here clean these function up. The cbnz instruction doesn't change
the condition flags so drop cc, however they should have memory added to the
clobber list.
Reviewed by: kib
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D4318
place physical memory at an address outside the old DMAP range. This is an
issue as we rely on being able to move from PA -> VA using this range.
Obtained from: Patrick Wildt <patrick@bitrig.org> (earlier version)
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D3885
the dynamic linker copy them, but not relocate them at the new location.
This allows us to run sqlite3 without it crashing.
Sponsored by: ABT Systems Ltd
boot on an SoC that places physical memory at an address past where three
levels of page tables can access in an identity mapping.
Submitted by: Wojciech Macek <wma@semihalf.com>,
Patrick Wildt <patrick@bitrig.org>
Differential Revision: https://reviews.freebsd.org/D3885 (partial)
Differential Revision: https://reviews.freebsd.org/D3744
in unknown state per spec.
Reviewed by: andrew (previous version)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3668
Currently FreeBSD supports only single PIC controller. Some systems
that have more than one (like ThunderX dual-socket) fails to boot.
Disable other PICes until proper handling is implemented in the
generic interrupt code.
Reviewed by: imp
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3682
Increase MAXCPU number to the maximum known value the existing
hardware can support.
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3405
Introduce supprot for SMP to GICv3 and ITS drivers.
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3299
in savectx where it will be used to store the current state however will
pass in a pcb when vfp_save_state expected a thread pointer.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
This is copied from the amd64 version with minor changes. These should be
merged into a single file as from a quick look there are other copies of
the same file in other parts of the tree.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Use Vritual Counter register associated with Generic Timer to
read the cyclecount.
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3134
Add a method to identify CPU based on RAW MIDR value.
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3117
Previous DMAP size was too small for systems with more than 64GB
of RAM. Increase it to 128GB to support ThunderX CRB.
Reviewed by: andrew
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3113
This commit adds proper cache and shareability attributes to
the TCR register.
Set memory attributes to Normal, outer and inner cacheable WBWA.
Set shareability to inner and outer shareable when SMP is enabled.
Reviewed by: andrew
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3093
ACPI driver requires special functions to be provided by machdep code.
Add temporary stubs to satisfy the compiler when both "pci" and "acpi"
are enabled in the kernel configuration file.
Reviewed by: andrew
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3028
and psci to start them. I expect ACPI support to be added later.
This has been tested on qemu with 2 cpus as that is the current value of
MAXCPUS. This is expected to be increased in the future as FreeBSD has
been tested on 48 cores on the Cavium ThunderX hardware.
Partially based on a patch from Robin Randhawa from ARM.
Approved by: ABT Systems Ltd
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3024
include this file without first including the headers needed for uint32_t
and the like use the __foo type.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
This commit reworks the code responsible for identification of
the CPUs during runtime.
It is necessary to provide a way for workarounds and erratums
to be applied only for certain HW versions.
The copy of MIDR is now stored in pcpu to provide a fast and
convenient way for assambly code to read it (pcpu is used quite often
so there is a chance it's inside the cache).
The MIDR is also better way of identification than using user-friendly
cpu_desc structure, because it can be compiled into comparision of
single u32 with only one access to the memory - this is crucial
for some erratums which are called from performance-critical
places.
Changes in cpu_identify makes this function safe to be called
on non-boot CPUs.
New function CPU_MATCH was implemented which returns boolean
value based on mathing masked MIDR with chip identification.
Example of usage:
printf("is thunder: %d\n", CPU_MATCH(CPU_IMPL_MASK | CPU_PART_MASK,
CPU_IMPL_CAVIUM, CPU_PART_THUNDER, 0, 0));
printf("is generic: %d\n", CPU_MATCH(CPU_IMPL_MASK | CPU_PART_MASK,
CPU_IMPL_ARM, CPU_PART_FOUNDATION, 0, 0));
Reviewed by: andrew
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3030
provide a semantic defined by the C11 fences with corresponding
memory_order.
atomic_thread_fence_acq() gives r | r, w, where r and w are read and
write accesses, and | denotes the fence itself.
atomic_thread_fence_rel() is r, w | w.
atomic_thread_fence_acq_rel() is the combination of the acquire and
release in single operation. Note that reads after the acq+rel fence
could be made visible before writes preceeding the fence.
atomic_thread_fence_seq_cst() orders all accesses before/after the
fence, and the fence itself is globally ordered against other
sequentially consistent atomic operations.
Reviewed by: alc
Discussed with: bde
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
Add ARM ITS (Interrupt Translation Services) support required
to bring-up message signalled interrupts on some ARM64 platforms.
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
On other architectures floatingpoint.h is a symlink to
machine/floatingpoint.h which in turn includes machine/ieeefp.h.
Do this on arm64 as well for now.
Sponsored by: The FreeBSD Foundation
register bits. Nothing in base uses these as they are deprecated, however
third-party applications, such as perl, expect some of these functions to
exist.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
drivers, one for fdt, one for acpi. It then uses this to decide if it will
use fdt or acpi.
The GICv2 (interrupt controller) and Generic Timer drivers have been
updated to handle both cases.
As this is early code we still need FDT to find the kernel console, and
some parts are still missing, including PCI support.
Differential Revision: https://reviews.freebsd.org/D2463
Reviewed by: jhb, jkim, emaste
Obtained from: ABT Systems Ltd
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Using plain dsb()/dmb() as full system barriers is usually to much.
Adding proper options to those barriers (instead of full system - sy)
will most likely reduce the cost of the instructions and will benefit
in performance improvement.
This commit adds options to barrier macro definitions.
Obtained from: Semihalf
Reviewed by: andrew, ian
Sponsored by: The FreeBSD Foundation
GICv3 allows to distribute interrupts to more than 8 cores served by
the previous GIC revisions. GICv3 introduces additional logic in form
of Re-Distributors associated with particular CPUs to determine
the highest priority interrupts and manage PPIs and LPIs
(Locality-specific Peripheral Interrupts). Interrupts routing is
based on CPUs' affinity numbers. CPU interface was changed to be
accessible via CPU System Registers and this is the preferred
(and supported) method in this driver.
Obtained from: Semihalf
Reviewed by: andrew, emaste, ian, imp
Sponsored by: The FreeBSD Foundation
The x86 busdma subsystem allows using multiple implementations.
By default the classic bounce buffer approach is used, however
on systems with IOMMU it could be in runtime switched to more
efficient hardware accelerated implementation.
This commit adds ARM64 port of the x86 busdma framework and bounce
buffer backend. It is ready to use on IO coherent systems. If the
IO coherency cannot be guaranteed, the cache management operations have
to be added to this code in places marked by /* XXX ARM64TODO (...) */
comments. Also IOMMU support might be added by registering another
busdma implementation like it is already done on the x86.
Reviewed by: andrew, emaste
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
This is only the minimum set of files needed to boot in qemu. As such it is
missing a few things.
The bus_dma code is currently only stub functions with a full implementation
from the development tree to follow.
The gic driver has been copied as the interrupt framework is different. It
is expected the two drivers will be merged by the arm intrng project,
however this will need to be imported into the tree and support for arm64
would need to be added.
This includes code developed by myself, SemiHalf, Ed Maste, and Robin
Randhawa from ARM. This has been funded by the FreeBSD Foundation, with
early development by myself in my spare time with assistance from Robin.
Differential Revision: https://reviews.freebsd.org/D2199
Reviewed by: emaste, imp
Relnotes: yes
Sponsored by: The FreeBSD Foundation