Kris Kennaway
80bdfd1362
Typo.
...
Obtained from: OpenBSD
1999-05-09 13:41:19 +00:00
Peter Wemm
8baa9b47b6
Quiet a warning, put a #if 0 around some (I believe) unused static structs.
1999-05-09 13:21:06 +00:00
Poul-Henning Kamp
0a346dab99
major(something) can never become NODEV.
1999-05-09 13:13:52 +00:00
Poul-Henning Kamp
61d9c46c46
remove cast from dev_t to dev_t.
1999-05-09 13:11:37 +00:00
Peter Wemm
6f42b336a5
Move opt_sio.h options to conf/options and activate in isa/sio.c
1999-05-09 13:10:49 +00:00
Poul-Henning Kamp
52400704e9
Unconfuse DEV_MODULE() and DEV_DRIVER_MODULE() about the difference between
...
a major number for a dev_t.
1999-05-09 13:00:50 +00:00
Doug Rabson
e3a3d09cb9
Remove DDB.
1999-05-09 11:42:19 +00:00
Doug Rabson
c914395258
Back out the last change to disk.c - a kernel change removed the need.
...
Enabled writing to the disklabel when writing a disk (only affects alpha).
1999-05-09 11:34:58 +00:00
Doug Rabson
c586a73949
Hack the diskslice stuff so that it allows the alpha sysinstall to
...
manipulate the disklabel. This is almost certainly not the right way
to do it but I'm desperate.
1999-05-09 11:27:41 +00:00
Poul-Henning Kamp
3000820ae0
add some amount of sanity to the way the gdb stuff finds its device.
...
I'm not too happy about the result either, but at least it has less
chance of backfiring.
This particular feature could be called "a mess" without offending
anybody.
1999-05-09 10:51:13 +00:00
Peter Wemm
3f74540725
Fix two warnings.
1999-05-09 10:45:54 +00:00
Peter Wemm
a924771339
Fix warnings.
1999-05-09 10:43:54 +00:00
Poul-Henning Kamp
9cead0b272
Yet a major/dev_t confusion
...
Spotted by Bruce.
1999-05-09 10:42:39 +00:00
Poul-Henning Kamp
1a4dd80a43
siocngetc & putc can be staticized.
1999-05-09 10:28:50 +00:00
Poul-Henning Kamp
90fb336860
Yet another place which knew too much. Still not sure how much
...
good this does in the end.
1999-05-09 10:25:30 +00:00
Poul-Henning Kamp
0510491458
fix some DRIVER_TYPE / INTR_TYPE confusions.
1999-05-09 09:56:52 +00:00
Poul-Henning Kamp
dd3ebe6b04
Don't confuse dev_t and major numbers in DEV_MODULE()
1999-05-09 08:58:45 +00:00
Poul-Henning Kamp
8f0024a54a
Peter beat me to half this patch, but didn't do the other half:
...
set d_bmaj
don't cast a dev_t to int before comparing to NODEV
1999-05-09 08:18:12 +00:00
Peter Wemm
0da14f00bf
Comment advising ordering of cdevsw_add and bdevsw_add is obsolete (no
...
bdevsw_add any more).
1999-05-09 08:10:17 +00:00
Poul-Henning Kamp
33525517b5
Duh, bdevsw() takes dev_t arg.
1999-05-09 07:56:36 +00:00
John Birrell
608fa2c9e7
Mutex test program.
...
Submitted by: Daniel Eischen <eischen@vigrid.com>
1999-05-09 07:55:24 +00:00
John Birrell
33859c8093
Add mutex test program.
1999-05-09 07:50:31 +00:00
KATO Takenori
c4f748e7eb
Removed DRIVER_TYPE_TTY field.
1999-05-09 05:02:26 +00:00
Kazutaka YOKOTA
ab4918cbff
Reserve a major number for the frame buffer device.
1999-05-09 05:02:15 +00:00
KATO Takenori
f88efae58f
Sync with sys/isa/sio.c revision 1.234.
1999-05-09 05:00:54 +00:00
Kazutaka YOKOTA
194da42d48
Don't confuse cursor keys with numpad keys when composing a char code.
...
PR: kern/10988
1999-05-09 05:00:19 +00:00
Kazutaka YOKOTA
57600c2385
Minor tweak after the introduction of new-bus to i386; properly
...
check "disabled" and "flags" probe hints.
1999-05-09 04:59:24 +00:00
Kazutaka YOKOTA
d1a67a9435
Revive APM hooking code for i386 arch now that the same source file is
...
used for both i386 and alpha (the code was in sys/i386/isa/psm.c, but
was disabled when ported to alpha.)
1999-05-09 04:58:35 +00:00
Kazutaka YOKOTA
4e1cc0095d
Make apm_probe() properly return an error code when APM BIOS calls
...
failed, so that the apm driver won't be attached.
1999-05-09 04:58:13 +00:00
Kazutaka YOKOTA
f64191e962
Added backward compatibility to set key repeat rate.
...
Requested by: bde
1999-05-09 04:57:51 +00:00
KATO Takenori
ac2e82dee1
Removed DRIVER_TYPE_TTY field.
1999-05-09 04:56:42 +00:00
KATO Takenori
ad4e5e0cfe
Sync with sys/isa/atkbd_isa.c revision 1.4.
1999-05-09 04:53:58 +00:00
KATO Takenori
2623b6551f
Sync with sys/i386/isa/wd.c revision 1.197.
1999-05-09 04:42:10 +00:00
KATO Takenori
b07d43b4ab
Sync with sys/i386/isa/pcausio.c revision 1.48.
1999-05-09 04:39:36 +00:00
KATO Takenori
0b8c369031
Sync with sys/i386/isa/npx.c revision 1.61.
1999-05-09 04:38:27 +00:00
KATO Takenori
f1ff3d972f
Sync with sys/i386/isa/mse.c revision 1.42.
1999-05-09 04:37:17 +00:00
KATO Takenori
75442335ac
Sync with sys/i386/isa/fd.c revision 1.142.
1999-05-09 04:34:28 +00:00
KATO Takenori
c977a12971
Sync with sys/i386/i386/userconfig.c revision 1.141.
1999-05-09 04:30:08 +00:00
KATO Takenori
b1c4ac8e82
Sync with sys/i386/conf/majors.i386 revision 1.72.
1999-05-09 04:28:23 +00:00
KATO Takenori
58d78bbe43
Sync with sys/i386/conf/files.i386 revision 1.238.
1999-05-09 04:27:30 +00:00
KATO Takenori
a1fe075531
Sync with sys/i386/conf/Makefile.i386 revision 1.149.
1999-05-09 04:26:06 +00:00
Kenneth D. Merry
50711c71c9
Add a facility in the CAM error handling code to retry selection timeouts.
...
If the client requests that the error recovery code retry a selection
timeout, it will be retried after half a second. The delay is to give the
device time to recover.
For most of these drivers, I only added selection timeout retries where
they were also retrying unit attention type errors. The sa(4) driver calls
saerror() in a number of places, but most of them don't request retrying
unit attentions.
Also, bump the default minimum CD changer timeout from 2 to 5 seconds and
the maximum timeout from 10 to 15 seconds. Some Pioneer changers seem to
have trouble with the shorter timeout.
Reviewed by: gibbs
1999-05-09 01:25:34 +00:00
Dmitrij Tejblum
db72e05829
Fix a freelist trashing under following confitions:
...
- first program lock a region in a file,
- second program wait on the lock,
- first program extend the region,
- second program interrupted by a signal.
1999-05-08 22:46:46 +00:00
Doug Rabson
566643e39e
Move the declaration of the interrupt type from the driver structure
...
to the BUS_SETUP_INTR call.
1999-05-08 21:59:43 +00:00
Kenneth D. Merry
c85c3a7452
The 2930U2 and 3950U2 are supported by the Adaptec driver.
1999-05-08 21:43:28 +00:00
Peter Wemm
9eea90b55d
Trivial tweak to avoid a warning.
1999-05-08 21:36:03 +00:00
Peter Wemm
0bbd01ea13
Add some notes about the globalness of certain things like interrupts
...
and ISA DMA channels (ie: on most PCI systems, they are not.. they are
on the ISA side of the PCI-ISA bridge and could be duplicated if there
were multiple PCI-ISA bridges, say in a laptop docking station), while
the APIC resources would be global on SMP systems.
Also, revert a previous change, change some printfs back to panics.
1999-05-08 21:34:34 +00:00
Peter Wemm
208e16e3af
Fix a typo (eisa<->isa) and some minor cosmetics.
1999-05-08 21:30:38 +00:00
Peter Wemm
14d3b6b80c
GC some #if 0 junk
1999-05-08 21:28:39 +00:00
Kenneth D. Merry
acea824638
Devices are hardwired with "unit 0", not "lun 0" as was in these man pages.
...
Also, update the pass(4) man page to indicate that some CCBs must be
sent through the xpt(4) device and cannot be sent through a pass device.
PR: 8826
1999-05-08 21:28:18 +00:00
