cpuid with %eax=1 will return a logical cpu count in bits 16-23 of %ebx.
Bit 29 is actually 'TM' according to AP-485. This signifies the presence
of the thermal control circuit (which I believe can slow the clock down
to reduce core temperature).
they make it through to userland. This should fix the p5-smp problem
without affecting the other cpus (eg: cyrix, see initcpu.c and the special
cache handling for these cpu types).
traps on the first instruction of signal handlers.
In trap.c:syscall(), fake a trace trap if the single-step flag was set
on entry to the kernel, not if it will be set on exit from the kernel.
This fixes bogus trace traps after the last instruction of signal handlers.
gdb-4.18 (the version in FreeBSD) still has problems with the program in
the PR. These seem to be due to bugs in gdb and not in FreeBSD, and are
fixed in gdb-5.1 (the distribution version).
PR: 33262
Tested by: k Macy <kip_macy@yahoo.com>
MFC after: 1 day
whether the machine context is valid and whether the FPU state is
valid (saved).
Mark the machine context valid before copying it out when sending a
signal.
Approved by: -arch
mutex releases to not require flags for the cases when preemption is
not allowed:
The purpose of the MTX_NOSWITCH and SWI_NOSWITCH flags is to prevent
switching to a higher priority thread on mutex releease and swi schedule,
respectively when that switch is not safe. Now that the critical section
API maintains a per-thread nesting count, the kernel can easily check
whether or not it should switch without relying on flags from the
programmer. This fixes a few bugs in that all current callers of
swi_sched() used SWI_NOSWITCH, when in fact, only the ones called from
fast interrupt handlers and the swi_sched of softclock needed this flag.
Note that to ensure that swi_sched()'s in clock and fast interrupt
handlers do not switch, these handlers have to be explicitly wrapped
in critical_enter/exit pairs. Presently, just wrapping the handlers is
sufficient, but in the future with the fully preemptive kernel, the
interrupt must be EOI'd before critical_exit() is called. (critical_exit()
can switch due to a deferred preemption in a fully preemptive kernel.)
I've tested the changes to the interrupt code on i386 and alpha. I have
not tested ia64, but the interrupt code is almost identical to the alpha
code, so I expect it will work fine. PowerPC and ARM do not yet have
interrupt code in the tree so they shouldn't be broken. Sparc64 is
broken, but that's been ok'd by jake and tmm who will be fixing the
interrupt code for sparc64 shortly.
Reviewed by: peter
Tested on: i386, alpha
they were right. Fix both kenter() and kremove() for SMP by ensuring that
the tlb is flushed on other cpu's. This will directly solve random-corruption
panic issues in -stable when it is MFC'd. Better to be safe then sorry, we
can optimize this later.
Original Suspicion by: peter
Maybe MFC: immediately on re's permission
and it's associated state variables: icu_lock with the name "icu". This
renames the imen_mtx for x86 SMP, but also uses the lock to protect
access to the 8259 PIC on x86 UP. This also adds an appropriate lock to
the various Alpha chipsets which fixes problems with Alpha SMP machines
dropping interrupts with an SMP kernel.
- The MD functions critical_enter/exit are renamed to start with a cpu_
prefix.
- MI wrapper functions critical_enter/exit maintain a per-thread nesting
count and a per-thread critical section saved state set when entering
a critical section while at nesting level 0 and restored when exiting
to nesting level 0. This moves the saved state out of spin mutexes so
that interlocking spin mutexes works properly.
- Most low-level MD code that used critical_enter/exit now use
cpu_critical_enter/exit. MI code such as device drivers and spin
mutexes use the MI wrappers. Note that since the MI wrappers store
the state in the current thread, they do not have any return values or
arguments.
- mtx_intr_enable() is replaced with a constant CRITICAL_FORK which is
assigned to curthread->td_savecrit during fork_exit().
Tested on: i386, alpha
- Axe inlvtlb_ok as it was completely redundant with smp_active.
- Remove references to non-existent variable and non-existent file
in i386/include/smp.h.
- Don't perform initializations local to each CPU while holding the
ap boot lock on i386 while an AP bootstraps itself.
- Reorganize the AP startup code some to unify the latter half of the
functions to bring an AP up. Eventually this might be broken out into
a MI function in subr_smp.c.
Non-SMP, i386-only, no polling in the idle loop at the moment.
To use this code you must compile a kernel with
options DEVICE_POLLING
and at runtime enable polling with
sysctl kern.polling.enable=1
The percentage of CPU reserved to userland can be set with
sysctl kern.polling.user_frac=NN (default is 50)
while the remainder is used by polling device drivers and netisr's.
These are the only two variables that you should need to touch. There
are a few more parameters in kern.polling but the default values
are adequate for all purposes. See the code in kern_poll.c for
more details on them.
Polling in the idle loop will be implemented shortly by introducing
a kernel thread which does the job. Until then, the amount of CPU
dedicated to polling will never exceed (100-user_frac).
The equivalent (actually, better) code for -stable is at
http://info.iet.unipi.it/~luigi/polling/
and also supports polling in the idle loop.
NOTE to Alpha developers:
There is really nothing in this code that is i386-specific.
If you move the 2 lines supporting the new option from
sys/conf/{files,options}.i386 to sys/conf/{files,options} I am
pretty sure that this should work on the Alpha as well, just that
I do not have a suitable test box to try it. If someone feels like
trying it, I would appreciate it.
NOTE to other developers:
sure some things could be done better, and as always I am open to
constructive criticism, which a few of you have already given and
I greatly appreciated.
However, before proposing radical architectural changes, please
take some time to possibly try out this code, or at the very least
read the comments in kern_poll.c, especially re. the reason why I
am using a soft netisr and cannot (I believe) replace it with a
simple timeout.
Quick description of files touched by this commit:
sys/conf/files.i386
new file kern/kern_poll.c
sys/conf/options.i386
new option
sys/i386/i386/trap.c
poll in trap (disabled by default)
sys/kern/kern_clock.c
initialization and hardclock hooks.
sys/kern/kern_intr.c
minor swi_net changes
sys/kern/kern_poll.c
the bulk of the code.
sys/net/if.h
new flag
sys/net/if_var.h
declaration for functions used in device drivers.
sys/net/netisr.h
NETISR_POLL
sys/dev/fxp/if_fxp.c
sys/dev/fxp/if_fxpvar.h
sys/pci/if_dc.c
sys/pci/if_dcreg.h
sys/pci/if_sis.c
sys/pci/if_sisreg.h
device driver modifications
- The MI portions of struct globaldata have been consolidated into a MI
struct pcpu. The MD per-CPU data are specified via a macro defined in
machine/pcpu.h. A macro was chosen over a struct mdpcpu so that the
interface would be cleaner (PCPU_GET(my_md_field) vs.
PCPU_GET(md.md_my_md_field)).
- All references to globaldata are changed to pcpu instead. In a UP kernel,
this data was stored as global variables which is where the original name
came from. In an SMP world this data is per-CPU and ideally private to each
CPU outside of the context of debuggers. This also included combining
machine/globaldata.h and machine/globals.h into machine/pcpu.h.
- The pointer to the thread using the FPU on i386 was renamed from
npxthread to fpcurthread to be identical with other architectures.
- Make the show pcpu ddb command MI with a MD callout to display MD
fields.
- The globaldata_register() function was renamed to pcpu_init() and now
init's MI fields of a struct pcpu in addition to registering it with
the internal array and list.
- A pcpu_destroy() function was added to remove a struct pcpu from the
internal array and list.
Tested on: alpha, i386
Reviewed by: peter, jake
This flag adds a pausing utility. When ran with -p, during the kernel
probing phase, the kernel will pause after each line of output.
This pausing can be ended with the '.' key, and is automatically
suspended when entering ddb.
This flag comes in handy at systems without a serial port that either hang
during booting or reser.
Reviewed by: (partly by jlemon)
MFC after: 1 week
Merge in the irq 0 detection. Add comment about why.
If we have irq 0, ignore it like we do irq 255. Some BIOS writers aren't
careful like they should be.
alpha pmap. In particular -
- pd_entry_t and pt_entry_t are now u_int32_t instead of a pointer.
This is to enable cleaner PAE and x86-64 support down the track sor
that we can change the pd_entry_t/pt_entry_t types to 64 bit entities.
- Terminate "unsigned *ptep, pte" with extreme prejudice and use the
correct pt_entry_t/pd_entry_t types.
- Various other cosmetic changes to match cleanups elsewhere.
- This eliminates a boatload of casts.
- use VM_MAXUSER_ADDRESS in place of UPT_MIN_ADDRESS in a couple of places
where we're testing user address space limits. Assuming the page tables
start directly after the end of user space is not a safe assumption.
There is still more to go.
- use NPTEPG/NPDEPG instead of magic 1024 (important for PAE)
- use pt_entry_t instead of unsigned (important for PAE)
- use vm_offset_t instead of unsigned for va's (important for x86-64)
ill effects. This should fix problems threaded programs are having with
auto-detecting CPU type.
Reported by: Joe Clarke <marcus@marcuscom.com>
Tested by: Joe Clarke <marcus@marcuscom.com>
Reviewed by: jhb
MFC after: 1 week
lock as this usually makes the problem worse.
- If we get a page fault while holding a spin lock, treat it as a fatal
trap and don't even bother calling into the VM since calling into the
VM will panic when trying to lock Giant before we can get a useful
message anyways.
- clean up wakeup routing fixup code by using macros.
- allocate pte object temporary for kernel thread to avoid kernel
panic by events from sleep button or lid switch.
- Add S4BIOS sleep implementation. This will works well if MIB
hw.acpi.s4bios is set (and of course BIOS supports it and hibernation
is enabled correctly).
- Add DSDT overriding support which is submitted by takawata originally.
If loader tunable acpi_dsdt_load="YES" and DSDT file is set to
acpi_dsdt_name (default DSDT file name is /boot/acpi_dsdt.aml),
ACPI CA core loads DSDT from given file rather than BIOS memory block.
DSDT file can be generated by iasl in ports/devel/acpicatools/.
- Add new files so that we can add our proposed additional code to Intel
ACPI CA into these files temporary. They will be removed when
similar code is added into ACPI CA officially.
o Make <stdint.h> a symbolic link to <sys/stdint.h>.
o Move most of <sys/inttypes.h> into <sys/stdint.h>, as per C99.
o Remove <sys/inttypes.h>.
o Adjust includes in sys/types.h and boot/efi/include/ia64/efibind.h
to reflect new location of integer types in <sys/stdint.h>.
o Remove previously symbolicly linked <inttypes.h>, instead create a
new file.
o Add MD headers <machine/_inttypes.h> from NetBSD.
o Include <sys/stdint.h> in <inttypes.h>, as required by C99; and
include <machine/_inttypes.h> in <inttypes.h>, to fill in the
remaining requirements for <inttypes.h>.
o Add additional integer types in <machine/ansi.h> and
<machine/limits.h> which are included via <sys/stdint.h>.
Partially obtain from: NetBSD
Tested on: alpha, i386
Discussed on: freebsd-standards@bostonradio.org
Reviewed by: bde, fenner, obrien, wollman
- Now that apm loadable module can inform its existence to other kernel
components (e.g. i386/isa/clock.c:startrtclock()'s TCS hack).
- Exchange priority of SI_SUB_CPU and SI_SUB_KLD for above purpose.
- Add simple arbitration mechanism for APM vs. ACPI. This prevents
the kernel enables both of them.
- Remove obsolete `#ifdef DEV_APM' related code.
- Add abstracted interface for Powermanagement operations. Public apm(4)
functions, such as apm_suspend(), should be replaced new interfaces.
Currently only power_pm_suspend (successor of apm_suspend) is implemented.
Reviewed by: peter, arch@ and audit@
a temporary fix so that we can compile kernels. I waited 30 minutes
for a response from the person who would likely know, but any longer
is too long to wait with breakage at ToT.
(allocating pv entries w/ zalloci) when called in a loop due to
an madvise(). It is possible to completely exhaust the free page list and
cause a system panic when an expected allocation fails.
by the profiler on a running system. This is not done sparsely, as
memory is cheaper than processor speed and each gprof mcount() and
mexitcount() operation is already very expensive.
Obtained from: NAI Labs CBOSS project
Funded by: DARPA
is npx.c's job and setting it here breaks the edit-time option of not
setting it in npx.c. (It is not set in the right places for the SMP
case, but always setting it here is harmless because there isn't even
an edit-time option to not set it.)
This emulates APM device node interface APIs (mainly ioctl) and
provides APM services for the applications. The goal is to support
most of APM applications without any changes.
Implemented ioctls in this commit are:
- APMIO_SUSPEND (mapped ACPI S3 as default but changable by sysctl)
- APMIO_STANDBY (mapped ACPI S1 as default but changable by sysctl)
- APMIO_GETINFO and APMIO_GETINFO_OLD
- APMIO_GETPWSTATUS
With above, many APM applications which get batteries, ac-line
info. and transition the system into suspend/standby mode (such as
wmapm, xbatt) should work with ACPI enabled kernel (if ACPI works well :-)
Reviewed by: arch@, audit@ and some guys
userland. The per thread ucred reference is immutable and thus needs no
locks to be read. However, until all the proc locking associated with
writes to p_ucred are completed, it is still not safe to use the per-thread
reference.
Tested on: x86 (SMP), alpha, sparc64
- Fix a bug in the LDT changes where the wrong argument was passed to
set_user_ldt() from cpu_switch(). The bug was passing a pointer to the
ldt, but set_user_ldt() takes a pointer to the process' mdproc structure.
Submitted by: bde
- Set the type and trapframe number for the F00F workaround since type
can be used later by sv_transtrap(). Debuggers might also want to look
at the type in the trapframe.
Submitted by: bde (mostly)
{set,fill}_{,fp,db}regs() fixup:
- Add dummy {set,fill}_dbregs() on architectures that don't have them.
- KSEfy the powerpc versions (struct proc -> struct thread).
- Some architectures had the prototypes in md_var.h, some in reg.h, and
some in both; for consistency, move them to reg.h on all platforms.
These functions aren't really MD (the implementation is MD, but the interface
is MI), so they should move to an MI header, but I haven't figured out which
one yet.
Run-tested on i386, build-tested on Alpha, untested on other platforms.
- sys/pc98/pc98/npx.c 1.87 (2001/09/15; author: imp)
I don't think pc98 has acpi at all, so ifdef the acpi attachments for
now.
This completes merging sys/pc98/pc98/npx.c into sys/i386/isa/npx.c so
that the former can be removed.
and the irq are different for pc98, and are not very well handled (we
use a historical mess of hard-coded values, values from header files
and values from hints).
- 1.58 (2000/09/01; author: kato)
Fixed FPU_ERROR_BROKEN code. It had old-isa code.
- 1.33 (1998/03/09; author: kato)
Make FPU_ERROR_BROKEN a new-style option.
- 1.7 (1996/10/09; author: asami)
Make sure FPU is recognized for non-Intel CPUs.
The log for rev.1.7 should have said something like:
Added FPU_ERROR_BROKEN option. This forces a successful probe for
exception 16, so that hardware with a broken FPU error signal can sort
of work.
Use the normal interrupt handler (npx_intr()) instead of a special
probe-time interrupt handler, although this causes problems due to
the bus_teardown_intr() not actually even tearing down the interrupt
(these problems were avoided by doing interrupt attachment for the
special interrupt handler directly). Fixed minor bitrot in comments.
The reason for the npxprobe()/npxprobe1() split mostly went away at
about the same time it was made (in 1992 or 1993 just before the
beginning of history). 386BSD ran all probes with interrupts completely
masked, and I didn't want to disturb this when I added an irq probe
to npxprobe(). An irq (not necessarily npx) must be acked for at least
external npx's to take the cpu out of the wait state that it enters
when an npx error occurs, so the probe must be done with a suitable
irq unmasked. npxprobe() went to great lengths to unmask precisely
the npx irq.
Running probes with all interrupts masked was never really needed in
FreeBSD, since FreeBSD always masked interrupts well enough using
splhigh(), but it wasn't until rev.1.48 (1995/12/12) of autoconf.c
that all probes were run with CPU interrupts enabled. This permits
npxprobe() to probe its irq using normal interrupt resources. Note
that most drivers still can't depend on this. It depends on the
interrupt handler being fast and the irq not being shared.
lost when the buggy code goes away completely:
- don't assume that the npx irq number is >= 8. Rev.1.73 only reversed
part of the hard-coding of it to 13 in rev.1.66.
- backed out the part of rev.1.84 that added a highly confused comment
about an enable_intr() being "highly bogus". The whole reason for
existence of npxprobe() (separate from the main probe, npxprobe1())
is to handle the complications to make this enable_intr() safe.
- backed out the part of rev.1.94 that modified npxprobe(). It mainly
broke the enable_intr() to restore_intr(). Restoring the interrupt
state in a nested way is precisely what is not wanted here. It was
harmless in practice because npxprobe() is called with interrupts
enabled, so restoring the interrupt state enables interrupts. Most
of npxprobe() is a no-op for the same reason...
This significantly reduces the number of TLB shootdowns caused by
vmapbuf/vunmapbuf when performing many large reads from raw disk devices.
Reviewed by: dillon
instruction. Stefan Keller <dres@earth.serd.org> noticed that CPU
identification was broken when compiled with -O2, and tracked it
down to the asm statement, which was storing values into memory
without specifying that memory was modified. He submitted a patch
which added "memory" as a clobber, but I refined it further to
arrive at this version.
MFC after: 3 days
code in ipl.s and icu_ipl.s that used them was removed when the
interrupt thread system was committed. Debuggers also knew about
Xresume* because these labels hide the real names of the interrupt
handlers (Xintr*), and debuggers need to special-case interrupt
handlers to get the interrupt frame.
Both gdb and ddb will now use the Xintr* and Xfastintr* symbols to
detect interrupt frames. Fast interrupt frames were never identified
correctly before, so this fixes the problem of the running stack
frame getting lost in a ddb or gdb trace generated from a fast
interrupt - e.g. when debugging a simple infinite loop in the kernel
using a serial console, the frame containing the loop would never
appear in a gdb or ddb trace.
Reviewed by: jhb, bde
The type of bus_space_tag_t is now a pointer to bus_space_tag structure,
and the bus_space_tag structure saves pointers to functions for direct
access and relocate access.
Added bsh_bam member to the bus_space_handle structure, it saves access
method either direct access or relocate access which is called by
bus_space_* functions.
Added the mecia device support. If the bs_da and bs_ra in bus tag are set
NEPC_io_space_tag and NEPC_mem_space_tag respectively, new bus_space stuff
changes the register of mecia automatically for 16bit access.
Obtained from: NetBSD/pc98
the current interrupt thread routines will guarantee the condition this is
checking for at a higher level but inthand_add() and inthand_remove() as
they currently exist don't satisfy this condition. (Which does need to be
fixed but which will take a bit more work.) This fixes shared interrupts.
the size of the kernel virtual address space relatively painlessly.
Userland will adapt via the exported kernbase symbol. Increasing
this causes the user part of address space to reduce.
a vm86trapframe for switching to vm86 [unlikely] while exiting.
I lost this when doing the pcb move that went in with the KSE commit.
Reviewed by: jake
will be private to each CPU.
- Re-style(9) the globaldata structures. There really needs to be a MI
struct pcpu that has a MD struct mdpcpu member at some point.
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.
Sorry john! (your next MFC will be a doosie!)
Reviewed by: peter@freebsd.org, dillon@freebsd.org
X-MFC after: ha ha ha ha
it to the MI area. KSE touched cpu_wait() which had the same change
replicated five ways for each platform. Now it can just do it once.
The only MD parts seemed to be dealing with fpu state cleanup and things
like vm86 cleanup on x86. The rest was identical.
XXX: ia64 and powerpc did not have cpu_throw(), so I've put a functional
stub in place.
Reviewed by: jake, tmm, dillon
the following bugs.
- When constructing a resource configuration, respect the order
in which resource descriptors are read, in order to establish
the correct mapping between the descriptors and configuration
registers.
"Plug and Play ISA Specification, Version 1.0a", Sec 4.6.1, May 5,
1994. "Clarifications to the Plug and Play ISA Specification,
Version 1.0a", Sec 6.2.1, Dec. 10, 1994.
- Do not ignore null (empty) descriptors; they are valid descriptors
acting as filler.
"Clarifications to the Plug and Play ISA Specification, Version 1.0a",
Sec 6.2.1.
- Correctly set up logical device configuration registers for null
resources.
"Clarifications to the Plug and Play ISA Specification, Version 1.0a"
- Handle null resources properly in the resource allocator for the
ISA bus.
with system statistics monitoring tools (such as systat, vmstat...)
because of stopping RTC interrupts generation.
Restore all the timers (RTC and i8254) atomically.
Reviewed by: bde
MFC after: 1 week
Instead introduce the [M] prefix to existing keywords. e.g.
MSTD is the MP SAFE version of STD. This is prepatory for a
massive Giant lock pushdown. The old MPSAFE keyword made
syscalls.master too messy.
Begin comments MP-Safe procedures with the comment:
/*
* MPSAFE
*/
This comments means that the procedure may be called without
Giant held (The procedure itself may still need to obtain
Giant temporarily to do its thing).
sv_prepsyscall() is now MP SAFE and assumed to be MP SAFE
sv_transtrap() is now MP SAFE and assumed to be MP SAFE
ktrsyscall() and ktrsysret() are now MP SAFE (Giant Pushdown)
trapsignal() is now MP SAFE (Giant Pushdown)
Places which used to do the if (mtx_owned(&Giant)) mtx_unlock(&Giant)
test in syscall[2]() in */*/trap.c now do not. Instead they
explicitly unlock Giant if they previously obtained it, and then
assert that it is no longer held to catch broken system calls.
Rebuild syscall tables.
multiple times, others do. The last strategy, which was to assume
that already routed interrupts were good and just return them doesn't
work for some laptops. So, instead, we have a new strategy: we notice
that we have an interrupt that's already routed. We go ahead and try
to route it, none the less. We will assume that it is correctly
routed, even if the route fails. We still assume that other failures
in the bios32 call are because the interrupt is NOT routed.
Note: some laptops do not support the bios32 interface to PCI BIOS and
we need to call it via the INT 2A interface. That is another windmill
to till at later.
Also correct a minor typo and minor whitespace nits.
Strong MFC candidate.
level implementation stuff out of machine/globaldata.h to avoid exposing
UPAGES to lots more places. The end result is that we can double
the kernel stack size with 'options UPAGES=4' etc.
This is mainly being done for the benefit of a MFC to RELENG_4 at some
point. -current doesn't really need this so much since each interrupt
runs on its own kstack.
