which makes stack prot correct for non-main threads created by binaries
with statically linked libthr.
Cache result, but do not engage into the full double-checked locking,
since calculation of the return value is idempotent.
PR: 252549
Reported and reviewed by: emaste
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28075
Detect and use RDTSCP if available, instead of fence+RDTSC. For AMD Zens+,
use LFENCE+RDTSC instead of RDTSCP (or MFENCE;RDTSC previously).
Reviewed by: gallatin, markj
Tested by: pho
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27986
Create array of rdtsc selectors and provide helper that calculate the
index into the selectors array.
Reviewed by: gallatin, markj
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27986
Instead of providing ifuncs for each kind of fence, define ifuncs
that combine fence and invocation of RDTSC. This refactoring makes
introduction of RDTSCP use possible.
Reviewed by: gallatin, markj
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27986
regcomp.c uses the "start + count < end" idiom to check that there are
"count" bytes available in an array of char "start" and "end" both point to.
This is fine, unless "start + count" goes beyond the last element of the
array. In this case, pedantic interpretation of the C standard makes the
comparison of such a pointer against "end" undefined, and optimizers from
hell will happily remove as much code as possible because of this.
An example of this occurs in regcomp.c's bothcases(), which defines
bracket[3], sets "next" to "bracket" and "end" to "bracket + 2". Then it
invokes p_bracket(), which starts with "if (p->next + 5 < p->end)"...
Because bothcases() and p_bracket() are static functions in regcomp.c, there
is a real risk of miscompilation if aggressive inlining happens.
The following diff rewrites the "start + count < end" constructs into "end -
start > count". Assuming "end" and "start" are always pointing in the array
(such as "bracket[3]" above), "end - start" is well-defined and can be
compared without trouble.
As a bonus, MORE2() implies MORE() therefore SEETWO() can be simplified a
bit.
PR: 252403
aio_fsync(O_DSYNC, ...) is the asynchronous version of fdatasync(2).
Reviewed by: kib, asomers, jhb
Differential Review: https://reviews.freebsd.org/D25071
POSIX O_DSYNC means that writes include an implicit fdatasync(2), just
as O_SYNC implies fsync(2).
VOP_WRITE() functions that understand the new IO_DATASYNC flag can act
accordingly, but we'll still pass down IO_SYNC so that file systems that
don't understand it will continue to provide the stronger O_SYNC
behaviour.
Flag also applies to fcntl(2).
Reviewed by: kib, delphij
Differential Revision: https://reviews.freebsd.org/D25090
As suggested in D27598. This also supports MK_WERROR.clang=no and
MK_WERROR.gcc=no to support the existing NO_WERROR.<compiler> uses.
Reviewed By: brooks
Differential Revision: https://reviews.freebsd.org/D27601
POSIX AIO is great, but it lacks vectored I/O functions. This commit
fixes that shortcoming by adding aio_writev and aio_readv. They aren't
part of the standard, but they're an obvious extension. They work just
like their synchronous equivalents pwritev and preadv.
It isn't yet possible to use vectored aiocbs with lio_listio, but that
could be added in the future.
Reviewed by: jhb, kib, bcr
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D27743
PR#252358 reported a serious performance problem w.r.t.
cp(1) when copying large non-sparse files.
This problem appears to have been caused by cp(1)
calling copy_file_range(2) with a small "len" argument.
This patch adds a recommendation to use a large "len"
value where possible, for performance reasons.
Reviewed by: asomers
Differential Revision: https://reviews.freebsd.org/D27935
The current POSIX.1-202x draft (1.1) was used as source material.
Submitted by: Soumendra Ganguly <soumendraganguly@gmail.com>
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D27787
The cpuset(2) tests should be run as root (require.user properly set) with
>= 3 cpus for maximum coverage. All tests that want to modify the cpuset
don't assume any particular cpu layout (i.e. the first cpu may not be 0, the
last may not be first + count) and the following scenarios are tested:
1.) newset: basic execute cpuset() to grab a new cpuset, make sure the
assigned cpuset then has a different ID.
2.) transient: create a new cpuset then assign the process its original
cpuset, ensuring that the one we created is now gone.
3.) deadlk: test assigning an anonymous mask, then resetting the process
base affinity with 1-cpu overlap w.r.t. the anonymous mask and with
0-cpu overlap w.r.t. the anonymous mask.
4.) jail_attach_newbase: process attaches to a jail with its own
cpuset+mask (e.g. cpuset -c -l 1,2 jail -c path=/ command=/bin/sh)
5.) jail_attach_newbase_plain: process attaches to a jail with its own
cpuset (e.g. cpuset -c jail -c path=/ command=/bin/sh)
6.) jail_attach_prevbase: process attaches to a jail with the containing
jail's root cpuset (e.g. jail -c path=/ command=/bin/sh)
7.) jail_attach_plain: process attaches to a jail with the containing jail's
root cpuset+mask.
8.) badparent: creates a new cpuset and modifies the anonymous thread mask,
then setid's back to the original and checks that cpuset_getid() returns
the expected set.
Differential Revision: https://reviews.freebsd.org/D27307
Add shims to map NetBSD's API to CPUSET(9). Obviously the invalid input
parts of these tests are relatively useless since we're just testing the
shims that aren't used elsewhere, there's still some amount of value in
the parts testing valid inputs.
Differential Revision: https://reviews.freebsd.org/D27307
These functions get/set tty winsize respectively, and are trivial wrappers
around corresponding termio ioctls.
The functions are expected to be a part of POSIX.1 issue 8:
https://www.austingroupbugs.net/view.php?id=1151#c3856.
They are currently available in NetBSD and in musl libc.
PR: 251868
Submitted by: Soumendra Ganguly <soumendraganguly@gmail.com>
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27650
- varios "new sentence, new line" warnings
- varios "sections out of conventional order" warnings
- varios "unusual Xr order" warnings
- varios "missing section argument" warnings
- varios "no blank before trailing delimiter" warnings
- varios "normalizing date format" warnings
MFC after: 1 month
Only for the arches that provide user-mode TLS.
PR: 251651
Requested by: yuri
Discussed with: emaste, jilles, tijl
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D27495
MFC after: 2 weeks
Linux claims 4.3BSD, we claim 4.4BSD and OpenBSD claims 4.3BSD-Reno. It turns
out that OpenBSD got it right: the function was added in late 1988 a few months
after 4.3BSD-Tahoe, well in advance of 4.3BSD-Reno.
Reviewed by: bcr
Approved by: bcr
Differential Revision: https://reviews.freebsd.org/D27392
Sort by manpage section, then sort entries alphabetically.
This makes the manpages `make manlint` clean.
MFC after: 1 week
Sponsored by: DellEMC Isilon
Months should be fully spelled as their local-specific equivalents: in this
case `Oct` should have been spelled like `October`.
Reported by: make manlint
MFC after: 1 week
Sponsored by: DellEMC Isilon
The CAVEATS section was misspelled as "CAVEAT" before this change. Fix the
spelling to identify issues related to the section.
Furthermore, given that the section order was incorrect, move the CAVEATS
section down to the bottom of the manpage, per the conventional section
order.
MFC after: 1 week
Reported by: make manlint
Sponsored by: DellEMC Isilon
`vfork(2)` should be referenced in paragraphs as `.Fn vfork`, not `vfork()`.
This change switches the reference to use `.Fn`, which in turn makes the
manpage `make manlint` clean.
MFC after: 1 week
Reported by: make manlint
Sponsored by: DellEMC Isilon
Sorting order should be done by manpage section (2 vs 3), then alphabetically.
This change fixes the order to sort by the manpage section, first.
Reported by: make manlint
MFC after: 1 week
Sponsored by: DellEMC Isilon
- pthreads(3) should actually be pthread(3).
- getentropy(2) should actually be getentropy(3).
This makes the manpage `make manlint` clean.
MFC after: 1 week
Sponsored by: DellEMC Isilon
This is being done for the formatting and context changes. While the net content
hasn't been changed, the content/context changes were sufficient to warrant the
date bump.
MFC after: 1 week
MFC with: r368431, r368433, r368434, r368435
Sponsored by: DellEMC Isilon
While some of the syscalls' behavior were documented and implied in the
RETURN VALUES section by earlier, e.g., the DESCRIPTION sections, as having
behavior of the other calls (`*_fd` vs `*_file` vs `*_link`), there was a lot
of implied return value behavior in the section prior to this change.
Explicitly document the syscall behavior per the current implementation in
sys/kern/vfs_extattr.c so others can better develop based on its explicit
documented behavior instead of having to digest the context of the manpage to
understand the appropriate behavior.
MFC after: 1 week
MFC with: r368431, r368433, r368434
Sponsored by: DellEMC Isilon
- Remove an unnecessary trailing comma separating a two-item clause.
- Sort more function calls alphabetically (in the same vein as r368433).
MFC after: 1 week
Sponsored by: DellEMC Isilon
Although some sections of the manpage sort the syscalls alphabetically, many
core areas of the manpage do not. Sort the syscalls so it is easier to pick out
functional changes and to improve manpage readability.
This formatting change is also being done to make future functional changes
easier to spot.
MFC after: 1 week
Sponsored by: DellEMC Isilon
The date with .Dd prior to this change isn't canonically spelled out: it
should have been "December", not "Dec".
MFC after: 1 week
Sponsored by: DellEMC Isilon
- The CAVEATS section was misspelled as "CAVEAT".
- The CAVEATS section should come before the "BUGS" section and after
other existing sections by convention.
MFC after: 1 week
Reported by: make manlint
Sponsored by: DellEMC Isilon
It was realized just a little too late that this was a hack that belonged in
individual regex(3)-using applications. It was surrounded in NOTYET and not
implemented in the engine, so remove it.
This is the last of the needed GNU expressions before we can unleash bsdgrep
by default. \b is effectively an agnostic equivalent of \< and \>, while
\B will match every space that isn't making a transition from
nonchar -> char or char -> nonchar.
These are GNU extensions, generally equivalent to ^ and $ except that the
new syntax will not match beginning of line after the first in a multi-line
expression or the end of line before absolute last in a multi-line
expression.
Follow-up to r353959 and r368070: do the same for other architectures.
arm32 already seems to use its own .fnstart/.fnend directives, which
appear to be ARM-specific variants of the same thing. Likewise, MIPS
uses .frame directives.
Reviewed by: arichardson
Differential Revision: https://reviews.freebsd.org/D27387
This seems to be required by recent clang asan.
I do not see other way than put the symbol under FBSD_1.0 version.
PR: 251112
Reported by: Andrew Stitcher <astitcher@apache.org>
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D27389
unsigned char promotes to int, which can overflow when shifted left by
24 bits or more. this has been reported multiple times but then
forgotten. it's expected to be benign UB, but can trap when built with
explicit overflow catching (ubsan or similar). fix it now.
note that promotion to uint32_t is safe and portable even outside of
the assumptions usually made in musl, since either uint32_t has rank
at least unsigned int, so that no further default promotions happen,
or int is wide enough that the shift can't overflow. this is a
desirable property to have in case someone wants to reuse the code
elsewhere.
musl commit: 593caa456309714402ca4cb77c3770f4c24da9da
Obtained from: musl
