The values from the old address space do not make sense for the new
program. In particular, gsbase might be the TLS base for the old
program but the new program has no TLS now.
amd64 already handles this correctly.
Reported and reviewed by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Patches like file.txt attached to PR 190195 with a final line formed
like ">(EOL)" could cause a copy past the end of the current line buffer. In the
case of PR 191641, this caused a duplicate line to be copied into the resulting
file.
Instead of running past the end, treat it as if it were a blank line.
PR: 191641
Reviewed by: cem, emaste, pfg
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D12609
nodes to allocate for the blist, and to initialize them. The computation
can be done much more quickly by identifying the terminating node, if any,
at every level of the tree and then summing the number of nodes at each
level that precedes the topmost terminator. The initialization can also be
done quickly, since settings at the root mark the tree as all-allocated, and
only a few terminator nodes need to be marked in the rest of the tree.
Eliminate blst_radix_init, and perform its two functions more simply in
blist_create.
The allocation of the blist takes places in two pieces, but there's no good
reason to do so, when a single allocation is sufficient, and simpler.
Allocate the blist struct, and the array of nodes associated with it, with a
single allocation.
Submitted by: Doug Moore <dougm@rice.edu>
Reviewed by: markj (an earlier version)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D11968
attachment of i2c devices needed by hdmi.
The hdmi init also uses an intrhook callback to defer initialization, and if
the hdmi callback runs first, the i2c devices will not yet have registered
their device_t in association with their FDT phandle, which allows cross-
device references on FDT systems.
Now the hdmi deferred init checks for the i2c device registration, and if
it's not complete yet, it registers as an eventhandler watching for newbus
attach events. When the i2c device eventually attaches, the hdmi driver
unregisters from watching further events, and continues with the hdmi init.
Because the function signatures for an intrhook callback and an event
handler callback are the same, a single function is used for both callbacks.
Reported by: Russell Haley <russ.haley@gmail.com>
The detach case is slightly complicated by the fact that some in-kernel
consumers may want to know before a device detaches (so they can release
related resources, stop using the device, etc), but the detach can fail. So
there are pre- and post-detach notifications for those consumers who need to
handle all cases.
A couple salient comments from the review, they amount to some helpful
documentation about these events, but there's currently no good place for
such documentation...
Note that in the current newbus locking model, DETACH_BEGIN and
DETACH_COMPLETE/FAILED sequence of event handler invocation might interweave
with other attach/detach events arbitrarily. The handlers should be prepared
for such situations.
Also should note that detach may be called after the parent bus knows the
hardware has left the building. In-kernel consumers have to be prepared to
cope with this race.
Differential Revision: https://reviews.freebsd.org/D12557
When the EVENTHANDLER(9) subsystem was created, it was a documented feature
that an eventhandler callback function could safely deregister itself. In
r200652 that feature was inadvertantly broken by adding drain-wait logic to
eventhandler_deregister(), so that it would be safe to unload a module upon
return from deregistering its event handlers.
There are now 145 callers of EVENTHANDLER_DEREGISTER(), and it's likely many
of them are depending on the drain-wait logic that has been in place for 8
years. So instead of creating a separate eventhandler_drain() and adding it
to some or all of those 145 call sites, this creates a separate
eventhandler_drain_nowait() function for the specific purpose of
deregistering a callback from within the running callback.
Differential Revision: https://reviews.freebsd.org/D12561
the page is already wired or queued. Prior to the elimination of PG_CACHED
pages, vm_page_grab() might have returned a valid, previously PG_CACHED
page, in which case enqueueing the page was necessary. Now, that can't
happen. Moreover, activating the page is a dubious choice, since the page
is not being accessed.
Reviewed by: kib
MFC after: 1 week
end up with non-standard DESTDIR information in its symlink. This
can happen very trivially if the release scripts are used.
Sponsored by: Limelight Networks
connection was reset by the remote end, sendfile() would just report
ENOTCONN instead of ECONNRESET.
Submitted by: Jason Eggleston <jason@eggnet.com>
Reviewed by: glebius
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12575
At initialization, hc_source_mask only includes non-Pure sources.
The patch changes source registration to enable the registered source in the
hc_source_mask bitmask. This mask governs which sources are harvested.
This patch also disallows userspace from disabling such sources.
PR: 222807
Submitted by: W. Dean Freeman <badfilemagic AT gmail.com>
Reviewed by: jmg (earlier version), delphij
Approved by: secteam (delphij)
Obtained from: HBSD 0054e3e170e083811acc9f3b637f8be8a86c03e7
Security: yes
Differential Revision: https://reviews.freebsd.org/D12611
Changes since 1.16.26.0 for all three firmwares are listed below. This
list was obtained from the Release Notes of the Chelsio Unified Wire
v3.5.05 release for Linux.
T6 Firmware
++++++++++++
================================================================================
Version : 1.16.63.0
Date : 09/29/2017
================================================================================
Fixes
-----
BASE:
- Fixed a fw crash when configured traffic rate limit is less than 10kbps.
- Fixed traffic rate limiting for smaller traffic rate value.
ETH:
- Fixed 40G link failure when interface is toggled.
- Fixed adapter crash when interface is toggled during traffic.
- Fixed 25G link failure when PEER only supports consortium mode autoneg
for 25G.
- Fixed 100G optics link failure when cable is plugged in after bringing up
the interface.
- Enable RS FEC as default if speed is 100G.
- Fixed DCBX configuration refresh failure.
OFLD
- Fixed 0B iWARP ingress read failure.
- Fixed iWARP SRQ reuse failure.
FOiSCSI:
- Fixed vlan interface ping failure.
- Fixed target discovery failures.
- Fixed mutual chap login failure.
================================================================================
Version : 1.16.59.0
Date : 09/05/2017
================================================================================
FIXES
-----
BASE:
- Fixed fw crash caused by MC parity error in SO adapters.
- Generate Timer0Int interrupt if fw crashes due to unaligned access error. Host
driver must look into PCIE_FW register to see if any fw fatal error has
encountered. If PCIE_FW doesn't indicate any error then driver must ignore this
interrupt.
- Fixed receive buffer threshold settings which was resulting in error frames on
receive side.
ETH:
- Fixed an issue in connection traffic shaping when
FLOWC_WR->FW_FLOWC_MNEM_SCHEDCLASS is not received in first WR on the connection.
- Fixed link failure when speed is changed from 10G-1G-10G due to incorrect flag
check.
- Fixed improper LED behaviour for blink test and when traffic is running.
- Removed storage of previous fec settings from fw. Driver needs to pass the user
settings whenever a new module is plugged in as fw resets these when a module is
unplugged.
OFLD
- OVS offload: TP cache is flushed periodically to get the accuate filters stats
(hit count).
ENHANCEMENTS
------------
BASE:
- Ring backbone feature added. New FW_PARAMS_PARAM_DEV_RING_BACKBONE param type
added to query and enable ring backbone support.
- VNI support added for filtering. New entry_type FW_VI_MAC_TYPE_EXACTMAC_VNI
added to FW_VI_MAC_CMD.
- Added new API FW_PARAM_PARAM_DEV_MPSBGMAP to read the priority to buffer group
mapping for the ports.
- FW_PARAMS_PARAM_DEV_TPCHMAP API added to read the port to channel mapping.
- HMA (Host memory access) support added. New FW_HMA_CMD and
FW_PARAMS_PARAM_DEV_HMA_SIZE added to query and configure the HMA. It
enables the memfree support (256 connections) for iwarp.
- PTP support enabled.
ETH:
- Added consortium mode 50G support.
- Added the ability to allow only selected speeds to be advertised during auto
negotiation.
- Increased port capability from 16 to 32 bits to support more speeds.
FW_PARAMS_PARAM_PFVF_PORT_CAPS32 added to query whether fw supports 16 or 32
bit port capability.
OFLD:
- RDMA Write with immediate support added (iwarp 2.0 feature)
- FW_TLS_KEYCTX_TX_WR removed and security key management moved to driver.
- 256 offloaded connections support for iwarp on SO adapters.
iSCSI:
- New param FW_PARAMS_PARAM_DEV_PPOD_EDRAM added for iscsi ppod configuration
in EDRAM (performance improvement).
FOiSCSI:
- iSCSI Command offload target support added.
FOFCoE:
- FCoE support enabled.
================================================================================
Version : 1.16.43.0
Date : 05/05/2017
================================================================================
FIXES
-----
BASE:
- Fixed default DCB mode to AUTO.
- Fixed DCBX bugs when AUTO mode is configured in config file.
- Fixed an issue where even after removing PFC from switch, PFC wasn't getting
reset.
- Fixed DDR3/DDR4 ECC errors.
- Fixed an FLR issue where FLR completion was going to host before FLR
processing is finished in fw.
ETH:
- Fixed bug in writing multi-bytes using i2c interface.
- Fixed the link failure when optical cable is inserted into the QSA module
after loading the driver.
- Fixed false link up when peer interface was brought down.
- Enabling RS FEC by default for 100Gbase-SR4 according to 802.3BJ standard.
- Fixed bugs related to negotiated fec based local/peer fec ability and request.
- Fixed auto-neg failure with few switches.
- T6 Performance improvement fixes.
OFLD
- Fixed an extra credit issue if FW_RI_TYPE_FINI is delayed in fw due to
backpressure.
- Added a new queue type FW_IQ_TYPE_VF_CQ to handle the FW_PARAMS_PARAM_DMAQ*
commands. queue type will be part of the FW_PARAMS_PARAM_DMAQ_IQ_INTIDX
value. Used in guest RDMA (RDMA from VM/VF) usecase.
- T6 Crypto Coprocessor mode bug fixes.
- T6 Crypto TLS-inline mode bug fixes.
ENHANCEMENTS
------------
BASE:
- Added new API FW_PARAM_PARAM_DEV_MPSBGMAP to read the priority to buffer
group mapping for the ports.
ETH:
- Added broadcom consortium next page support for 25G CR.
This can be enabled using flags=an_brcm option in the t6-config.txt file.
- Added spider mode support.
- Added support for 10G-BaseT converter sfp+ module.
- Added support for additional 25G/100G cables.
- Added support to enable/disable auto-neg using ethtool.
================================================================================
Version : 1.16.33.0
Date : 02/24/2017
================================================================================
Fixes
-----
BASE:
- Fixed DDR4 uncorrectable errors.
ETH:
- Enabled link auto negotiation (AN) by default in config file.
- Added AN and FEC control api. Host driver and application can enable/disable
AN and FEC.
ENHANCEMENTS
------------
BASE:
- Enabled High priorty filter.
- Added T6425 adapter support.
ETH:
- Added new workrequest ETH_TX_PKTS2_WR (see fw api document for more details).
================================================================================
Version : 1.16.29.0
Date : 01/27/2017
================================================================================
FIXES
-----
BASE:
- Set multiple fec values only if AN is enabled in config file and when module
is connected.
- Fixed intermittent DDR3/4 ECC errors.
- max number of ethctrl queue in VF set to 2 (reverted the last change
because it causes problem in VF drivers).
ETH:
- Made devlog more verbose by printing cable information in redable form.
- Updated AN settings to work with more 25G/100G switches.
- Added support for more SFP28/QSFP28 cables.
- Fixed an issue of link going down after few hours of idle time.
OFLD:
- Fixed an issue in TLS which was causing fw crash on running TLS traffic.
FOiSCSI:
- Fixed the failure of PXE boot OS install on an iscsi lun.
ENHANCEMENTS
------------
OFLD:
- Added filtering support for NAT. New WR FW_FILTER2_WR and
FW_PARAMS_PARAM_DEV_FILTER2_WR added for the same.
- Added RDMA guest mode (mode 3 or RDMA from VF) support.
================================================================================
T5 Firmware
++++++++++++
================================================================================
Version : 1.16.63.0
Date : 09/29/2017
================================================================================
Fixes
-----
BASE:
- Fixed offload memory overcommit in case of SO adapter.
ETH:
- Fixed DCBX configuration refresh failure.
OFLD
- Fixed 0B iWARP ingress read failure.
FOiSCSI:
- Fixed vlan interface ping failure.
================================================================================
Version : 1.16.59.0
Date : 09/05/2017
================================================================================
FIXES
-----
BASE:
- Fixed an FLR issue which was causing error when VF attached VM was powered on.
ETH:
- Fixed an issue in connection traffic shaping when
FLOWC_WR->FW_FLOWC_MNEM_SCHEDCLASS is not received in first WR on the connection.
- Fixed link failure when speed is changed from 10G-1G-10G due to incorrect flag
check.
- Fixed T580 link failure with few switches which take more time for
establishing link.
ENHANCEMENTS
------------
BASE:
- Ring backbone feature added. New FW_PARAMS_PARAM_DEV_RING_BACKBONE param type
added to query and enable ring backbone support.
- Added new API FW_PARAM_PARAM_DEV_MPSBGMAP to read the priority to buffer group
mapping for the ports.
- FW_PARAMS_PARAM_DEV_TPCHMAP API added to read the port to channel mapping.
FOiSCSI:
- iSCSI Command offload target support added.
================================================================================
Version : 1.16.43.0
Date : 05/05/2017
================================================================================
FIXES
-----
BASE:
- Fixed default DCB mode to AUTO.
- Fixed DCBX bugs when AUTO mode is configured in config file.
- Fixed an issue where even after removing PFC from switch, PFC wasn't getting
reset.
ETH:
- Fixed bug in writing multi-bytes using i2c interface.
- Fixed the link failure when optical cable is inserted into the QSA module
after loading the driver.
OFLD
- Fixed an extra credit issue if FW_RI_TYPE_FINI is delayed in fw due to
backpressure.
- Added a new queue type FW_IQ_TYPE_VF_CQ to handle the FW_PARAMS_PARAM_DMAQ*
commands. queue type will be part of the FW_PARAMS_PARAM_DMAQ_IQ_INTIDX
value. Used in guest RDMA (RDMA from VM/VF) usecase.
ENHANCEMENTS
------------
BASE:
- Added new API FW_PARAM_PARAM_DEV_MPSBGMAP to read the priority to buffer
group mapping for the ports.
================================================================================
Version : 1.16.33.0
Date : 02/24/2017
================================================================================
ENHANCEMENTS
------------
ETH:
- Added new workrequest ETH_TX_PKTS2_WR (see fw api document for more details).
================================================================================
Version : 1.16.29.0
Date : 01/27/2017
================================================================================
FIXES
-----
BASE:
- max number of ethctrl queue in VF set to 2 (reverted the last change
because it causes problem in VF drivers).
FOiSCSI:
- Fixed the failure of PXE boot OS install on an iscsi lun.
ENHANCEMENTS
------------
OFLD:
- Added filtering support for NAT. New WR FW_FILTER2_WR and
FW_PARAMS_PARAM_DEV_FILTER2_WR added for the same.
- Added RDMA guest mode (mode 3 or RDMA from VF) support.
================================================================================
T4 Firmware
+++++++++++
================================================================================
Version : 1.16.63.0
Date : 09/29/2017
================================================================================
Fixes
-----
ETH:
- Fixed DCBX configuration refresh failure.
FOiSCSI:
- Fixed vlan interface ping failure.
================================================================================
Version : 1.16.59.0
Date : 09/05/2017
================================================================================
FIXES
-----
ETH:
- Fixed an issue in connection traffic shaping when
FLOWC_WR->FW_FLOWC_MNEM_SCHEDCLASS is not received in first WR on the connection.
ENHANCEMENTS
------------
BASE:
- FW_PARAMS_PARAM_DEV_TPCHMAP API added to read the port to channel mapping.
================================================================================
Version : 1.16.43.0
Date : 05/05/2017
================================================================================
FIXES
-----
BASE:
- Fixed default DCB mode to AUTO.
- Fixed DCBX bugs when AUTO mode is configured in config file.
- Fixed an issue where even after removing PFC from switch, PFC wasn't getting
reset.
ETH:
- Fixed bug in writing multi-bytes using i2c interface.
OFLD
- Fixed an extra credit issue if FW_RI_TYPE_FINI is delayed in fw due to
backpressure.
- Added a new queue type FW_IQ_TYPE_VF_CQ to handle the FW_PARAMS_PARAM_DMAQ*
commands. queue type will be part of the FW_PARAMS_PARAM_DMAQ_IQ_INTIDX
value. Used in guest RDMA (RDMA from VM/VF) usecase.
ENHANCEMENTS
------------
BASE:
- Added new API FW_PARAM_PARAM_DEV_MPSBGMAP to read the priority to buffer
group mapping for the ports.
Obtained from: Chelsio Communications
MFC after: 2 weeks
Sponsored by: Chelsio Communications
SUN8I and SUN50I (H3, H5, A83T and A64) have a second clock controller
unit. It controls the clocks for the second gpio controller, the IR
controller etc ...
Support for A83T is not supported.
Tested On: OrangePi One, Pine64
Lookups of the sort are rare compared to regular ones and succesfull ones
result in removing entries from the cache.
In the current code buckets are rlocked and a trylock dance is performed,
which can fail and cause a restart. Fixing it will require a little bit
of surgery and in order to keep the code maintaineable the 2 cases have
to split.
MFC after: 1 week
If VIMAGE is present we can start jails with their own pf instance. This
makes it fairly easy to run tests.
For example, this basic test verifies that drop/pass and icmp
classification works. It's a basic sanity test for pf, and hopefully an
example on how to write more pf tests.
The tests are skipped if VIMAGE is not enabled.
This work is inspired by the GSoC work of Panagiotes Mousikides.
Differential Revision: https://reviews.freebsd.org/D12580
The later fields of the harvest_event structure are predictable and provide
little value to the entropy pool. Only feed in the relatively high entropy
counter and explicit entropy buffer to increase measured input entropy.
See also:
https://people.freebsd.org/~jmg/vbsdcon_2017_ddfreebsdrng_slides.pdf
PR: 222807
Submitted by: W. Dean Freeman <badfilemagic AT gmail.com>
Reviewed by: jmg (earlier version), delphij
Approved by: secteam (delphij)
Obtained from: HBSD 8d809124d563937edd84c9c9d5494406e359c55c
Security: no -- low entropy marginal input has no known negative affect on pool quality
Differential Revision: https://reviews.freebsd.org/D12610
'last' is the sector number of the last usable sector. Sector
numbers start with 0. As such, 'last' is always 1 less than
the count of sectors and aligning 'last' down as-is means that
the number of free sectors is pessimized by 'alignment - 1' if
the number of usable sectors was already a multiple of the
alignment. Consequently, gpart(8) failed to create a partition
when the alignment and size were such that it would extend to
the end of the disk.
Previously it just didn't work at all - kvm_getprocs(3) doesn't update
the &nentries when it returns NULL. The end result was that ps(1) showed
garbage data instead of reporting kinfo_proc size mismatch.
Reviewed by: cem
Obtained from: CheriBSD
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D12414
Provide consistent snapshot of the requested descriptors by preventing
other threads from modifying LDT while we fetch the data, lock dt_lock
around the read. Copy the data into intermediate buffer, which is
copied out after the lock is dropped.
Comparing with the amd64 version, the read is done byte by byte, since
there is no atomic 64bit read (cmpxchg8b method is too heavy comparing
with the avoided issues).
Improve overflow checking for the descriptors range calculations and
remove unneeded casts. Use unsigned types for sizes.
Allow zero num argument to i386_get_ldt() and i386_set_ldt(). This
case is handled naturally by the code flow.
Reviewed by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Apply authenticated user context after update of wtmp(5) at start of session,
so that ftpd process is not killed by kernel with SIGXFSZ when user has
"filesize" limit lower than size of system wtmp file. Same applies
to session finalization: revert to super-user context before update of wtmp.
If ftpd hits limit while writing a file at user request,
do not get killed with SIGXFSZ instantly but apparently ignore the signal,
process error and report it to the user, and continue with the session.
PR: 143570
Approved by: avg (mentor), mav (mentor)
MFC after: 1 week
enough processors. This isn't ideal, because one could still compile
MACHINE_ARCH armv6, but with armv7 options enabled. We don't normally
do that, and it's a bit of an edge case so accept the less than ideal
solution here in the absence of something better.
Reported by: strejda@
Sponsored by: Netflix
Move the retrieval of the image information into loader's main instead
of doing it in efizfs.c
Differential Revision: https://reviews.freebsd.org/D12564
Submitted by: Eric McCorkle
efi_devpath_is_prefix determines if a path matches a passed-in prefix.
Differential Revision: https://reviews.freebsd.org/D12564
Submitted by: Eric McCorkle
When using the default address list nam is still valid, the code in
r324054 assumed that is was NULL.
Reported by: Guy Yur <guyyur@gmail.com>
Tested by: Guy Yur <guyyur@gmail.com>
This file shouldn't be modified manually but well, I did it in my previous
commit. So go down further the rabbit hole so as to at least keep some
consistency.
Reported by: bapt
