a machine with aliase ip addresses on the same subnet of an
interfaces' `real' ip addresses would generate <n> duplicate
broadcasts in clnt_broadcast().
Basically, this fix does a purge on the list of bradcast addresses.
discussion on -core about disk partitioning tools etc.
Add NOPIC=yes to Makefile to prevent any possibility of version mismatch
because of the potential grave consequences. (as suggested by phk)
Note that this is also on RELENG_2_1_0, since the sysinstall stuff is
hopefully going to remain in sync.
- Fix problem described in PR #1079: _gethostbynisaddr() doesn't
work. Make it accept the same arguments as all the other
gethostby*addr() functions and properly convert the supplied IP
address into a text string so that yp_match() can find it in the
hosts.byaddr map.
- Also fix potential memory leak: copy the results of yp_match() to
a static buffer and free the result (yp_match() returns dynamically
allocated memory).
ether_addr.c:
- Since I was in the neighborhood, fix ether_ntohost() and
ether_hostton() so that they don't bogusly for a free(result)
when yp_match() fails.
matter much on some systems, but on ftp servers (like wcarchive) where
you run with special stripped group and pwd.db files in the anonymous
ftp /etc, this can be a major speedup for ls(1).
ss_flags to SS_DISABLE and SS_ONSTACK. SA_ONSTACK is still used in
struct sigaction. Nowhere in our entire source tree could I find a
single place these were used.
reconnect once using the saved openlog() parameters.
This helps one of the system startup race conditions. If syslogd takes too
long to get going, some daemons can fail the connection and forever log
to the console even though the syslogd is running. That is ..unfortunate..
the statically compiled PS_STRINGS and USRSTACK variables. This prevents
programs using setproctitle from coredumping if the kernel VM is increased,
and stops libkvm users (w, ps, etc) from needing to be recompiled if only
the VM layout changes.
explicit that it is global to the entire "session", and that setsid() or
daemon() are need to have been called at some point.
The most notable offender of setlogin() misuse is XFree86's xdm.
to 2. This makes them agree with the declarations in libgcc, and
clears the way once again for linking c++rt0.o into all libraries,
and eliminating CPLUSPLUSLIB from <bsd.lib.mk>. (I have not made
that change yet, because there is still a bootstrapping problem
for "make world".)
Also, removed a check which ensured that the constructor count in
the first word of __CTOR_LIST__ was greater than zero before
traversing the list. I had added that check earlier, but it is no
longer necessary, now that there is guaranteed to be at least 2
words in __CTOR_LIST__.
It uses a static constructor to call _thread_init() at program start-up
time. That eliminates the need for any initialization hooks in crt0.o.
Added a symbol reference in "uthread_init.c", to ensure that the new
module will always be pulled in when the archive version of the library
is used.
In "Makefile.inc", defined CPLUSPLUSLIB, so that the constructor will be
properly invoked in the shared library.
Suggested by: Christopher Provenzano, Peter Wemm, and others.
for "fts_open" was wrong. Also, the "fts_info" field of the FTSENT
structure was misleadingly described as containing "flags". Actually, it
contains a single integer value.
in the main text of various man pages.
Thanks to Warner Losh for adding an option to manck to allow
it to scan the entire man page looking for bogus xrefs, instead
of just checking the SEE ALSO section.
resides in read-only memory is going to cause the program to core dump,
and this is commmon with older pre-ANSI C programs.
(I've scratched my head over this one at 3 in the morning before
while trying to port some ancient program)
Suggested by: Gary Kline <kline@tera.com>
- shared libraries are in ${SHLIBDIR}, not necessarily in ${LIBDIR}.
- don't remove or create any shared library versions except 2.0.
and improvements:
- don't use rm -r.
- indent the long shell command.
Submitted by: bde
Corrected some bogus cross references to man pages that we don't/won't
have and either deleted them, or found a more appropriate man page
that we do have. Various other minor changes to silence manck.
Manck is currently down to about 200 lines of errors, down from
the 500 - 600+ when I started all this.
Also corrected a few minor formatting errors, file location and cross
references in some of the section 3 man pages.
This shuts up a lot of the output from "manck" for section 3.
the loop that invokes the static constructors. That makes it safe
to link c++rt0.o into any shared library, even one that does not
have any static constructors. Formerly, doing that would cause a
bus error. If the library has no static constructors, __CTOR_LIST__
comes out as a simple 4-byte COMMON region, and it does not have
the usual NULL word that terminates the list of constructors. This
caused the old code to "call" a garbage address via the non-existent
entry __CTOR_LIST__[1].
The analogous code that invokes the static destructors was already safe.
This change is fully backward-compatible.
Reviewed by: dfr@render.com (Doug Rabson)
Install (optional) libutil.h with prototypes for the functions and
document this in the man page.
minor cleanups to the various routines, include the prototype file, declare
return codes etc.
of signals. Signals are now properly caught, tty state is being
restored, and the previous sigaction triggered. Upon receipt of a
sigcont, echo is turned off again.
SIGTSTP causes a buffer flush, the man page mentions this. (Although
i rather think of it as a feature than a bug.)
This is likely to be my last FreeBSD action for 1995, xearth shows
me that our .au guys must already write 1996. :-)
looking at a high resolution clock for each of the following events:
function call, function return, interrupt entry, interrupt exit,
and interesting branches. The differences between the times of
these events are added at appropriate places in a ordinary histogram
(as if very fast statistical profiling sampled the pc at those
places) so that ordinary gprof can be used to analyze the times.
gmon.h:
Histogram counters need to be 4 bytes for microsecond resolutions.
They will need to be larger for the 586 clock.
The comments were vax-centric and wrong even on vaxes. Does anyone
disagree?
gprof4.c:
The standard gprof should support counters of all integral sizes
and the size of the counter should be in the gmon header. This
hack will do until then. (Use gprof4 -u to examine the results
of non-statistical profiling.)
config/*:
Non-statistical profiling is configured with `config -pp'.
`config -p' still gives ordinary profiling.
kgmon/*:
Non-statistical profiling is enabled with `kgmon -B'. `kgmon -b'
still enables ordinary profiling (and distables non-statistical
profiling) if non-statistical profiling is configured.
is really necessary. Going backwards on a P6 is much slower than forwards
and it's a little slower on a P5. Also moved the count mask and 'std'
down a few lines - it's a couple percent faster this way on a P5.
replace the dozen other various hacks in the code that do all sorts
of crude things including spamming the envrionment strings with the new
argv string.
This version is mainly inspired by the sendmail version, with a couple of
ideas taken from the NetBSD implementation as well.
XDR routines auto-generated by rpcgen don't quite match the format of
the original ones even though tey have the same names (that was one of
the things wrong with the old XDR routines).
rpcgen-erated on the fly (just like librpcsvc).
Makefile: Add rule for generating yp_xdr.c and yp.h.
xdryp.c: gut everything except the special ypresp_all XDR function
needed to to handle yp_all() (this one can't be created on
the fly), and xdr_datum(), which isn't used internally by
libc, but which as documented as being there in yp_prot.h,
so what the hell. We now get everything else from yp_xdr.c.
yplib.c: change a few structure member names to match those found in
yp.h instead of those declared in yp_prot.h.
via mmap() up around the shared library area. Previously the directory
was allocated from space from it's own memory pool. Because of the way it
was being extended on processes with large malloced data segments (ie: inn)
once the page directory was extended for some reason, it was not possible
to lower the heap size any more to return pages to the OS.
(If my understanding is correct, page directory expansion occurs at 4MB,
12MB, 20MB, 28MB, etc.) I was seeing INN allocate a large amount of short
term memory, pushing it over the 28MB mark, and once it's transient demands
hit 28MB, it never freed it's pages and swap space again.)
I've been running this in my libc for about a month...
Also, seperate MALLOC_STATS from EXTRA_SANITY.. I found it useful to call
malloc_dump() from within INN from a ctlinnd command to see where the hell
all the memory was going.. :-) I've left MALLOC_STATS enabled, as it has
no run-time or data storage cost.
Reviewed by: phk
static executables that depend on this will need to be relinked (ie: do
this before 'ps'), but the dynamic linked stuff should be OK (ie: 'w')
Obtained from: NetBSD (not much point reinventing the wheel.. :-)
in particular circumstances. (malloc() does not zero memory, but usually
does by coincidenct that sbrk() returns zeroed pages)
Submitted-by: John Hood <cgull@smoke.marlboro.vt.us>
it before before trying to establish a binding. If /var/run/ypbind.lock
doesn't exist, or if it exists and isn't locked, then ypbind isn't
running, which means NIS is either turned off or hosed.
- Have _yp_check() call yp_unbind() after it sucessfully calls yp_bind()
to make sure it frees resources correctly. (I don't think there's really
a memory leak here, but it seems somehow wrong to call yp_bind() without
making a corresponding call to yp_unbind() afterwards.)
This makes the NIS code behave a little better in cases where libc makes
calls to NIS, but it isn't running correctly (i.e. there's no ypbind).
This cleans up some strange libc behavior that manifests itself if
you have the system domain name set, but aren't actually running NIS.
In this event, the getrpcent(3) code could try to call into NIS and
cause several inexplicable "clnttcp_create error: RPC program not
registered" messages to appear. This happens because _yp_check() checks
if the system domain name is set and, if it is, proceeds to call
yp_bind() to attempt to establish a binding. Since there is no
binding file (remember: ypbind isn't running, so /var/yp/binding
will be empty), _yp_dobind() will attempt to contact ypbind to
prod it into binding the domain. And because ypbind isn't running,
the code generates the 'clnttcp_create' error. Ultimately the
_yp_check() fails and the getrpcent(3) code rolls over to the /etc/rpc
file, but the error messages are annoying, and the code should be
smart enough to forgo the binding attempt when NIS is turned off.
both call getservent() to do most of the work, so we only need to modify
this file to take care of everybody).
Note that there is only one NIS services map (services.byname) even
though there are getservbyname() and getservbyport() library functions.
Submitted by: Mike Mitchell, supervisor@alb.asctmd.com
This is a bulk mport of Mike's IPX/SPX protocol stacks and all the
related gunf that goes with it..
it is not guaranteed to work 100% correctly at this time
but as we had several people trying to work on it
I figured it would be better to get it checked in so
they could all get teh same thing to work on..
Mikes been using it for a year or so
but on 2.0
more changes and stuff will be merged in from other developers now that this is in.
Mike Mitchell, Network Engineer
AMTECH Systems Corporation, Technology and Manufacturing
8600 Jefferson Street, Albuquerque, New Mexico 87113 (505) 856-8000
supervisor@alb.asctmd.com
Fixed description of domain of y*().
Fixed description of error domain. (This description is still half
redundant and half wrong, as in many other math man pages. fdlibm
doesn't support the VAX or Tahoe.)
Fixed capitalization of `Bessel'.
but a commit mail got lost, it's the same as for this commit:
lib/libc/gen confstr.c crypt.c disklabel.c fstab.c getcap.c
getgrent.c getgrouplist.c getpass.c getpwent.c
initgroups.c nlist.c psignal.c pwcache.c setmode.c
sleep.c sysconf.c sysctl.c syslog.c usleep.c
lib/libc/locale none.c read_runemagi.c setlocale.c
lib/libc/net gethostbydns.c getnetbydns.c getnetbynis.c
lib/libc/nls msgcat.c
lib/libc/quad Makefile.inc
lib/libc/regex engine.c regcomp.c regerror.c
Minor cleanup, mostly unused vars and missing #includes.
Limit the number of quad functions we pull in for 'i386'.
I still belive the quad stuff should go back into gcc.
Add compile-time warnings about crypt functions.
- Fix buffer overflow problem once and for all: do away with the buffer
copies to 'user' prior to calling _scancaches() and just pass a pointer
to the buffer returned by yp_match()/yp_first()/yp_next()/whatever.
(We turn the first ':' to a NUL first so strcmp() works, then change it
back later. Submitted by Bill Fenner <fenner@parc.xerox.com> and
tweaked slightly by me.
- Give _pw_breakout_yp() the 'more elegant solution' I promised way back when.
Eliminate several copies to static buffers and replace them with just
one copy. (The buffer returned by the NIS functions is at most
YPMAXRECORD bytes long, so we should only need one static buffer of
the same length (plus 2 for paranoia's sake).)
- Also in _pw_breakout_yp(): always set pw.pw_passwd to the username
obtained via NIS regardless of what pw_fields says: usernames cannot
be overridden so we have no choice but to use the name returned by
NIS.
- _Again_ in _pw_breakout_yp(): before doing anything else, check that
the first character of the NIS-returned buffer is not a '+' or '-'.
If it is, drop the entry. (#define EXTRA_PARANOIA 1 :)
- Probe for the master.passwd.* maps once during __initdb() instead
of doing it each time _getyppass() or _nextyppass() is called.
- Don't copy the NIS data buffers to static memory in _getyppass()
and _nextyppass(): this is done in _pw_breakout_yp() now.
- Test against phkmalloc and phkmalloc/2 (TNG!) to make sure we're
free()ing the yp buffers sanely.
- Put _havemaster(), _getyppass() and nextyppass() prototypes under
#ifdef YP. (Somehow they ended up on the wrong side of the #endif.)
- Remove unused variable ___yp_only.
- In some cases, we don't properly resolve _all_ possible group memberships.
If a user is a member of both local and NIS groups, we sometimes lose some
of the membership info from NIS. (Reported by: Thorsten Kukuk
<kukuk@uni-paderborn.de>)
- Make NIS +groupname overrides actually work the way the SunOS group(5)
man page says they should (make them work for all cases: getgrent(),
getgrnam() and getgrgid()).
- When not compiled with -DYP, grscan() should ignore entries that
begin with a '+'. When compiled _with_ -DYP, grscan() should ignore
+groupname entries that don't refer to real NIS groups.
- Remove redundant redeclaration of fgets(), strsep() and index() inside
grscan(). We already #include all the right header files for these.
Note: -groupname exclusion as specified in the Sun documentation still
isn't supported. This'll be a 2.2 addition. Right now I just want this
stuff to work.
What was happening, is if syslogd was not running, syslog() would do
a strcat("\r\n") on a non-null-terminated buffer, and write it to the console.
This meant that sometimes extra characters could be written to the console
during boot, depending on the stack contents.
This totally avoids the potential problem by using writev() like the rest
of the does, and avoid modifying the buffer after the trouble we've gone to
to carefully protect it.
This is actually a trivial fix, in spite of the long commit message.. :-)
It only appeared during boot and shutdown with syslogd stopped.
symbols.
An easy example to see this is to develop an X program which links
against Xt, but doesn't add -lX11 to the link line. It will link fine,
but cause run-time errors by ld.so because of missing symbols used by Xt
defined in X11. This patch makes the errors more readable.
Submitted by: jdp@polstra.com (John Polstra)
running on a tty. (Same as isatty()) The old-style TIOCGETP ioctl
wouldn't fly if the kernel didn't have COMPAT_43.
Submitted by: Carl Fongheiser <cmf@netins.net>
Performance is comparable to gnumalloc if you have sufficient RAM, and
it screams around it if you don't.
Compiled with "EXTRA_SANITY" until further notice.
see malloc.3 for more details.
control hooks.
It is similar to an unrolled multi-part snprintf(), in that a "FILE *" is
attached to a string buffer. There is also an optimisation for the case
where the syslog format string does not contain %m, which should improve
performance of "informational" logging, like from ftpd.
the group map after encountering a badly formatted entry.
getpwent.c: same as above for _nextyppass(), and also turn a couple of
sprintf()s into snprintf()s to avoid potential buffer overruns. (The
other day I nearly went mad because of a username in my NIS database
that's actually 9 characters long instead of 8. Stuffing a 9-character
username into an 8-character buffer can do some strange things.)
(This reminds me: I hope somebody's planning to fix the buffer overrun
security hole in syslog(3) before 2.1 ships.)
on, which is fine, except that _yp_dobind() is called before we check
the cache. The means we can return from the cache check (if we have
a hit) without calling _yp_unbind().
We should do the cache check first and _then_ drop into the section
that binds the server and does the yp_match query.
seperate function to avoid duplication. Also fix getpwent() a
small bit to properly handle the case where the magic NIS '+'
entry appears before the end of the password file.
getgrent.c: be a little more SunOS-ish. Make it look like the NIS
group map is 'inserted' at the the point(s) where the magic NIS '+'
entry/entries appear.
getgrent: fix a file descriptor leak: remember to close the netgroup
file after we determine that we're using NIS-only innetgr() lookups.
Since Bruce changed the #include <res_config.h> to #include "res_config.h"
this is no longer needed, and only makes the 'make' more verbose for
no real reason.
