kernel version introduced the sysctl (based upon a linux man-page)
- add comments to sscalls.master regarding some names of sysctls which are
different than the linux-names (based upon the linux unistd.h)
- add some dummy sysctls
- name an unimplemented sysctl
MFC after: 1 month
Lower (ISA) IRQs are working, but allowed mask is not set correctly.
Block both by default to allow HP BL465c G6 blade system to boot.
Reported by: Attila Nagy <bra@fsn.hu>
MFC after: 1 week
Although access to the flags to check/set OACTIVE is racy due to how
the default if_start() function works, this should remove any races
with read/modify/write between threads.
don't setup the avp mcast queue.
This is a bit annoying though - it turns out the mcast queue isn't
initialised for STA mode but it's then touched to see whether anything
is in it. That should be fixed in a subsequent commit.
Noticed by: gperez@entel.upc.edu
PR: kern/165895
Instead of using 25MHz equality threshold, look for the nearest value when
handling dev.cpu.0.freq sysctl and for exact match when it is expected.
ACPI may report extra level with frequency 1MHz above the nominal to
control Intel Turbo Boost operation. It is not a bug, but feature:
dev.cpu.0.freq_levels: 2934/106000 2933/95000 2800/82000 ...
In this case value 2933 means 2.93GHz, but 2934 means 3.2-3.6GHz.
I've found that my Core i7-870 based system has Intel Turbo Boost disabled
by default and without this change it was absolutely invisible and hard
to control.
MFC after: 2 weeks
After 8.0-RELEASE, iwi(4) doesn't send any data frames in infrastructure
mode.
Bacause of the condition `while (frm < efrm)', IEEE80211_VERIFY_LENGTH()
was checking item length beyond the ieee80211_frame region, and returned
from iwi_checkforqos() without setting flags, capinfo and associd.
In infrastructure mode associd is required, so this problem causes
discarding mbuf in ieee80211_start().
PR: kern/165819
Tested/Reviewed/Supported by: bschmidt and adrian
MFC after: 1 week
- Pass number of events to the statclock() and profclock() functions
same as to hardclock() before to not call them many times in a loop.
- Rename them into statclock_cnt() and profclock_cnt().
- Turn statclock() and profclock() into compatibility wrappers,
still needed for arm.
- Rename hardclock_anycpu() into hardclock_cnt() for unification.
MFC after: 1 week
XXX It would be good to use a better way to size intrcnt.
o) Fix literal 4s that are supposed to be sizeof (u_long).
XXX Why the * 2 here? Is this an artifact of a different system that this
code came from? We seem to allocate twice as much space for intrcnt
as we admit to in sintrcnt.
In a very noisy 2.4GHz environment (with HT/40 enabled, making it worse)
I saw the following occur:
* the air was considered "busy" a lot of the time;
* the cabq time is quite short due to staggered beacons being enabled;
* it just wasn't able to keep up TX'ing CABQ frames;
* .. and the cabq would swallow up all the TX ath_buf's.
This patch introduces a twiddle which allows the maximum cabq depth to be
set, forcing further frames to be dropped.
It defaults to the TX buffer count at the moment, so the default behaviour
isn't changed.
I've also started fleshing out a similar setup for the data path, so
it doesn't swallow up all the available TX buffers and preventing management
frames (such as ADDBA) out.
PR: kern/165895
frames with stations in power saving mode.
I'm not (yet) sure how to handle TX'ing aggregates frames to stations
that are in power saving mode, or whether that's even a feasible thing
to do. So in order to (mostly) not forget, leave a couple of comments
in the code.
The code presently assumes that the aggregation TID state for an ath_node
is locked not by the ath_node lock or a node+TID lock, but behind the
hardware queue said TID maps to. This assumption is going to be
incorrect for stations in power saving mode as we'll be TX'ing frames
on the multicast queue.
In any case, I'm afraid its a "later problem". :/
didn't already have them. This is because the ternary expression will
return int, due to the Usual Arithmetic Conversions. Such casts are not
needed for the 32 and 64 bit variants.
While here, add additional parentheses around the x86 variant, to
protect against unintended consequences.
MFC after: 2 weeks
amd64, if 'device isa' is present quiesce the 8259A's during boot and
resume from suspend.
While here, be more selective on amd64 about which kernel configurations
need elcr.c.
MFC after: 2 weeks
- Return failure for a suspend attempt if we have no wake address.
- Use intr_disable()/intr_restore() instead of ACPI_DISABLE_IRQS().
- Invoke intr_suspend() earlier and call intr_resume() if suspend
fails.
- Use pause in the loop waiting for CPU to suspend.
- Restore PAT MSR, switchtime, switchticks, and MTRRs on resume.
Reviewed by: jkim (earlier version)
MFC after: 2 weeks
- Remove extern "C". There are no functions with external linkage here. [1]
- Rename bswapNN_const(x) to bswapNN_gen(x) to indicate that these macros
are generic implementations that can take non-constant arguments. [1]
- Split up __GNUCLIKE_ASM && __GNUCLIKE_BUILTIN_CONSTANT_P and deal with
each separately.
- Replace _LP64 with __amd64__ because asm instructions are machine
dependent, not ABI dependent.
Submitted by: bde [1]
Reviewed by: bde
This function must be called with both the source and destination TXQs
locked or things will get hairy.
I added this as part of some debugging in a PR but it turned out to not
be the cause. I still think it's -correct- so, here it is.
the last buffer in the list.
The current behaviour (due to me, so pointy hat is firmly on my head here)
was incorrect - it was setting the link pointer to the last descriptor
of the _first_ buffer in the TXQ. Instead, it should have set it to the
last descriptor in the _last_ buffer in the TXQ.
This showed up as occasional TX stalls with frames in the TXQ but no
TX progress being made. Further inspection showed the TXQ looked like
it contained multiple "lists" of frames - there'd be a list of correct
frames, then a NULL link pointer, but there'd be a next buffer in the
list.
Since this code is only called upon an interface reset, it's likely
this only began showing up when I started doing stress testing
in environments which annoy the radios enough to cause lockups.
I've not yet any TX stalls with this patch applied.
PR: kern/165866
Expand pci_save_state and pci_restore_state to save more of
the config state for PCI Express and PCI-X devices. Various
writable control registers are present in PCI Express that
can potentially be lost over suspend/resume cycle.
This change is modeled after similar functionality in Linux.
Reviewed by: wlosh,jhb
MFC after: 1 month
When using big inodes there is sufficient space in ext3 to
keep extra resolution and birthtime (creation) timestamps.
The appropriate fields in the on-disk inode have been approved
for a long time but support for this in ext3 has not been
widely distributed.
In preparation for ext4 most linux distributions have enabled
by default such bigger inodes and some people use nanosecond
timestamps in ext3. We now support those when the inode is big
enough and while we do recognize the EXT4F_ROCOMPAT_EXTRA_ISIZE,
we maintain the extra timestamps even when they are not used.
An additional note by Bruce Evans:
We blindly accept unrepresentable tv_nsec in VOP_SETATTR(), but
all file systems have always done that. When POSIX gets around
to specifying the behaviour, it will probably require certain
rounding to the fs's resolution and not rejecting the request.
This unfortunately means that syscalls that set times can't
really tell if they succeeded without reading back the times
using stat() or similar and checking that they were set close
enough.
Reviewed by: bde
Approved by: jhb (mentor)
MFC after: 2 weeks
