It has nothing to share with too huge ctl.c other then device descriptor,
but even that may be counted as design error that may be fixed later.
At some point we may even want to have several ioctl ports.
Its idea was to be a simple initiator and execute several commands from
kernel level, but FreeBSD never had consumer for that functionality,
while its implementation polluted many unrelated places..
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Prakash Surya <prakash.surya@delphix.com>
illumos/illumos-gate@244781f10d
This patch attempts to reduce lock contention on the current arc_state_t
mutexes. These mutexes are used liberally to protect the number of LRU
lists within the ARC (e.g. ARC_mru, ARC_mfu, etc). The granularity at
which these locks are acquired has been shown to greatly affect the
performance of highly concurrent, cached workloads.
root disk. The embedded image is linked into the kernel in the .mfs
section.
Add rules and variables to kern.pre.mk and kern.post.mk that handle the
linking of the image. First objcopy is used to generate an object file.
Then, the object file is linked into the kernel.
Submitted by: Steve Kiernan <stevek@juniper.net>
Reviewed by: brooks@
Obtained from: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D2903
frame buffers and memory mapped UARTs.
1. Delay calling cninit() until after pmap_bootstrap(). This makes
sure we have PMAP initialized enough to add translations. Keep
kdb_init() after cninit() so that we have console when we need
to break into the debugger on boot.
2. Unfortunately, the ATPIC code had be moved as well so as to
avoid a spurious trap #30. The reason for which is not known
at this time.
3. In pmap_mapdev_attr(), when we need to map a device prior to the
VM system being initialized, use virtual_avail as the KVA to map
the device at. In particular, avoid using the direct map on amd64
because we can't demote by virtue of not being able to allocate
yet. Keep track of the translation.
Re-use the translation after the VM has been initialized to not
waste KVA and to satisfy the assumption in uart(4) that the handle
returned for the low-level console is the same as later returned
when the device is probed and attached.
4. In pmap_unmapdev() remove the mapping from the table when called
pre-init. Otherwise keep the mapping. During bus probe and attach
device resources are mapped and unmapped multiple times, which
would have us destroy the mapping used by the low-level console.
5. In pmap_init(), set pmap_initialized to signal that we're not
pre-init anymore. On amd64, bring the direct map in sync with the
translations created at that time.
6. Implement bus_space_map() and bus_space_unmap() for real: when
the tag corresponds to memory space, call the corresponding
pmap_mapdev() and pmap_unmapdev() functions to construct and
actual handle.
7. In efifb.c and vt_vga.c, remove the crutches and hacks and simply
call pmap_mapdev_attr() or bus_space_map() as desired.
Notes:
1. uart(4) already used bus_space_map() during low-level console
setup but since serial ports have traditionally been I/O port
based, the lack of a proper implementation for said function
was not a problem. It has always supported memory mapped UARTs
for low-level consoles by setting hw.uart.console accordingly.
2. The use of the direct map on amd64 without setting caching
attributes has been a bigger problem than previously thought.
This change has the fortunate (and unexpected) side-effect of
fixing various EFI frame buffer problems (though not all).
PR: 191564, 194952
Special thanks to:
1. XipLink, Inc -- generously donated an Intel Bay Trail E3800
based eval board (ADLE3800PC).
2. The FreeBSD Foundation, in particular emaste@ -- for UEFI
support in general and testing.
3. Everyone who tested the proposed for PR 191564.
4. jhb@ and kib@ for being a soundboard and applying a clue bat
if so needed.
changes in the firmwares since 1.11.27.0 are listed here (straight copy-paste
from the "Release Notes.txt" accompanying the Chelsio Unified Wire 2.11.1.0
release on the website).
22.1. T5 Firmware
+++++++++++++++++++++++++++++++++
Version : 1.14.4.0
Date : 08/05/2015
================================================================================
FIXES
-----
BASE:
- Fixes a potential data path hang by properly programming PMTX congestion
threshold settings.
- Fixes a potential initialization error when accessing a configuration file
stored on the flash.
- Fixes a regression where SGE resources can be miss-sized if iWARP is disabled.
ETH:
- Fixes a timing issue that would prevent CR4 links from coming up with some
switches.
FOFCoE:
- Defers fcoe linkdown mailbox command handling till LOGO is sent.
- Updates vlan prio for all outstanding IOs during dcbx update.
ENHANCEMENTS
------------
BASE:
- Adds support for PAUSE OFF watchdog.
- Reports devlog access information in PCIE_FW_PF register 7.
ETH:
- Enhances segmentation offload to include VxLAN and Geneve.
- Adds PTP support.
- Adds new interface to allow the driver to query the VI rss table base
addresses.
- Allows the driver to program the SGE ingrext contxt CongDrop field.
OFLD:
- Adds new interface for the driver to specify offloaded connections TCP snd
and rcv scale factors.
iSCSI:
- Adds support for iscsi segmentatation offload (ISO).
- Adds support for iscsi t10-dif offload.
FOiSCSI:
- Sets FORCE_BIT for cut through processing for FOiSCSI.
FOFCoE:
- Adds support for FCoE BB6.
- Improves WRITE performance.
================================================================================
================================================================================
Version : 1.13.32.0
Date : 03/25/2015
================================================================================
FIXES
-----
BASE:
- Fixes FW_CAPS_CONFIG_CMD return value on error (was positive instead of
negative)
- Fixes FW_PARAMS_PARAM_DEV_FLOWC_BUFFIFO_SZ indication (was wrong on certain
adapter configurations)
- Fixes config file based PL_TIMEOUT register programming
ETH:
- Fixes a potential EO UDP SEG header corruption
- Fixes an issue where 1000Base-X was not enabled correctly when using QSA
modules
OFLD:
- Fixes timeout issue with half-open connections
- Fixes FW_FLOWC_WR processing when state is set to finwait1
FOFCoE:
- Fixes fcoe xchg leaks in linkdown/peer down path
- Fixes cleanup in FCoE linkdown and fixed buf timer flowid abuse
- Fixes fw crash by clearing fcf flowc during bye
FOiSCSI:
- Don't create a new tcp socket if ERL0 attempt has timed out.
ENHANCEMENTS
------------
BASE:
- Adds support for VFs on PFs 4 to 7
- Adds support for QPs/CQs on any physical and virtual function
ETH:
- Stops sending LACP frames on loopback interface
- Adds an AUTOEQU indication to CPL_SGE_EGR_UPDATE
- Adds support for CR4 links (BEAN/AEC on 40G TwinAx cables)
OFLD:
- Improves default settings of LAN and CLUSTER TCP timer settings
- Sends Negative Advice CPLs to software
FOISCSI:
- Adds IPv6 support for foiscsi. Keeps backward compatibility with
old foiscsi drivers which doesn't support ipv6.
FOFCoE:
- Added fcoe debug support in flowc dump
================================================================================
================================================================================
Version : 1.12.25.0
Date : 10/22/2014
================================================================================
FIXES
-----
BASE:
- Improves precision of the Weight Round Robing Traffic Management Algorithm
- Fixes an issue where the link would intermittently fail to come up
- Fixes an issue where adapters with an external PHY couldn't run at 100Mbps
- Fixes an issue where active optical cables were not recognized
- Fixes link advertising issues on T520-BT (speed and pause frames) that would
cause the link to negotiate unexpected settings
- Forces link restart when auto-negotiation is disabled
- Fix an issue where pause frames wouldn't be fully disabled even if requested
ETH:
- Fixes NVGRE Segmentation Offload network header generation.
DCBX:
- Fixes an issue where some settings were not being sent to the switch
correctly
- Fixes an issue where back-to-back DCBX port updates could get overwritten by
FW
- Fixes a firmware crash on DCBX APP information request before link up
FOiSCSI:
- Fixes abort task leak in tmf response handling
- Fixes TCP RST handling while in iSCSI ERL0
- Fixes a firmware crash on BYE without INIT
ENHANCEMENTS
-------------
BASE:
- Adds link partner settings reporting when available
- Adds QSA support (in conjunction with QSA VPD)
- Adds T520-BT LED support
- Reports NOTSUPPORTED for modules with an unhandled identifier
DCBX:
- Adds version reporting (indicating which version FW is trying to negotiate)
- Adds IEEE support
- Reports LLDP time outs
FOiSCSI:
- Add support for multiple iSCSI DDP client
- Sends DHCP renew request when lease expires
================================================================================
22.2. T4 Firmware
+++++++++++++++++
Version : 1.14.4.0
Date : 08/05/2015
================================================================================
FIXES
-----
BASE:
- Fixes a potential initialization error when accessing a configuration file
stored on the flash.
- Initialize PCIE_DBG_INDIR_REQ.Enable to 0, as hardware failed to do so and
register dumps could result in errors.
ETH:
- Fixes an issue that sometimes prevented the link from coming up in CR adapters.
ENHANCEMENTS
------------
BASE:
- Adds support for PAUSE OFF watchdog.
- Reports devlog access information in PCIE_FW_PF register 7.
ETH:
- Adds new interface to allow the driver to query the VI rss table base
addresses.
OFLD:
- Adds new interface for the driver to specify offloaded connections TCP snd
and rcv scale factors.
================================================================================
================================================================================
Version : 1.13.32.0
Date : 03/25/2015
================================================================================
FIXES
-----
BASE:
- Fixes FW_CAPS_CONFIG_CMD return value on error (was positive instead of
negative)
- Fixes FW_PARAMS_PARAM_DEV_FLOWC_BUFFIFO_SZ indication (was wrong on certain
adapter configurations)
- Fixes config file based PL_TIMEOUT register programming
ETH:
- Fixes a potential EO UDP SEG header corruption
OFLD:
- Fixes timeout issue with half-open connections
- Fixes FW_FLOWC_WR processing when state is set to finwait1
FOiSCSI:
- Don't create a new tcp socket if ERL0 attempt has timed out.
ENHANCEMENTS
------------
ETH:
- Stops sending LACP frames on loopback interface
- Adds an AUTOEQU indication to CPL_SGE_EGR_UPDATE
OFLD:
- Improves default settings of LAN and CLUSTER TCP timer settings
- Sends Negative Advice CPLs to software
================================================================================
================================================================================
Version : 1.12.25.0
Date : 10/22/2014
================================================================================
FIXES
-----
BASE:
- Improves precision of the Weight Round Robing Traffic Management Algorithm
- Forces link restart when auto-negotiation is disabled
- Fix an issue where pause frames wouldn't be fully disabled even if requested
DCBX:
- Fixes an issue where some settings were not being sent to the switch
correctly
- Fixes an issue where back-to-back DCBX port updates could get overwritten by
FW
- Fixes a firmware crash on DCBX APP information request before link up
FOiSCSI:
- Fixes abort task leak in tmf response handling
- Fixes TCP RST handling while in iSCSI ERL0
- Fixes a firmware crash on BYE without INIT
ENHANCEMENTS
------------
BASE:
- Adds link partner settings reporting when available
- Firmware now reports NOTSUPPORTED for modules with an unhandled identifier
DCBX:
- Adds version reporting (indicating which version FW is trying to negotiate)
- Adds IEEE support
- Reports LLDP time outs
FOiSCSI:
- Adds support for multiple iSCSI DDP clients
- Sends DHCP renew request when lease expires
================================================================================
Obtained from: Chelsio Communications
MFC after: 2 weeks
Sponsored by: Chelsio Communications
unwind_frame function to read each stack frame until either the pc or stack
are no longer withing the kernel's address space.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
This is copied from the amd64 version with minor changes. These should be
merged into a single file as from a quick look there are other copies of
the same file in other parts of the tree.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Brightness is controlled through sysctl dev.gpiobacklight.X.brightness:
- any value greater than 0: backlight is on
- any value less than or equal to 0: backlight is off
FDT bindings docs in Linux tree:
Documentation/devicetree/bindings/video/backlight/gpio-backlight.txt
This feature is inspired by another Unix-alike OS commonly found on
airplane headrests.
A number of beasties[0] are drawn at top of framebuffer during boot,
based on the number of active SMP CPUs[1]. Console buffer output
continues to scroll in the screen area below beastie(s)[2].
After some time[3] has passed, the beasties are erased leaving the
entire terminal for use.
Includes two 80x80 vga16 beastie graphics and an 80x80 vga16 orb
graphic. (The graphics are RLE compressed to save some space -- 3x 3200
bytes uncompressed, or 4208 compressed.)
[0]: The user may select the style of beastie with
kern.vt.splash_cpu_style=(0|1|2)
[1]: Or the number may be overridden with tunable kern.vt.splash_ncpu.
[2]: https://www.youtube.com/watch?v=UP2jizfr3_o
[3]: Configurable with kern.vt.splash_cpu_duration (seconds, def. 10).
Differential Revision: https://reviews.freebsd.org/D2181
Reviewed by: dumbbell, emaste
Approved by: markj (mentor)
MFC after: 2 weeks
in lockstat.ko. This means that lockstat probes now have typed arguments and
will utilize SDT probe hot-patching support when it arrives.
Reviewed by: gnn
Differential Revision: https://reviews.freebsd.org/D2993
Summary:
For CloudABI we need to put two things on the stack of new processes:
the argument data (a binary blob; not strings) and a startup data
structure. The startup data structure contains interesting things such
as a pointer to the ELF program header, the thread ID of the initial
thread, a stack smashing protection canary, and a pointer to the
argument data.
Fetching system call arguments and setting the return value is similar
to FreeBSD. The only differences are that system call 0 does not exist
and that we call into cloudabi_convert_errno() to convert the error
code. We also need this function in a couple of other places, so we'd
better reuse it here.
Reviewers: dchagin, kib
Reviewed By: kib
Subscribers: imp
Differential Revision: https://reviews.freebsd.org/D3098
Comment that cryptodev shouldn't be used unless you know what you're
doing...
The various arm/mips and one powerpc configs that have cryptodev in
them need to be addressed, audited if they provide benefit and removed
if they don't...
- Tweek man page.
- Remove all mention of RANDOM_FORTUNA. If the system owner wants YARROW or DUMMY, they ask for it, otherwise they get FORTUNA.
- Tidy up headers a bit.
- Tidy up declarations a bit.
- Make static in a couple of places where needed.
- Move Yarrow/Fortuna SYSINIT/SYSUNINIT to randomdev.c, moving us towards a single file where the algorithm context is used.
- Get rid of random_*_process_buffer() functions. They were only used in one place each, and are better subsumed into those places.
- Remove *_post_read() functions as they are stubs everywhere.
- Assert against buffer size illegalities.
- Clean up some silly code in the randomdev_read() routine.
- Make the harvesting more consistent.
- Make some requested argument name changes.
- Tidy up and clarify a few comments.
- Make some requested comment changes.
- Make some requested macro changes.
* NOTE: the thing calling itself a 'unit test' is not yet a proper
unit test, but it helps me ensure things work. It may be a proper
unit test at some time in the future, but for now please don't make
any assumptions or hold any expectations.
Differential Revision: https://reviews.freebsd.org/D2025
Approved by: so (/dev/random blanket)
ACPI driver requires special functions to be provided by machdep code.
Add temporary stubs to satisfy the compiler when both "pci" and "acpi"
are enabled in the kernel configuration file.
Reviewed by: andrew
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3028
This is based on work done by jeff@ and jhb@, as well as the numa.diff
patch that has been circulating when someone asks for first-touch NUMA
on -10 or -11.
* Introduce a simple set of VM policy and iterator types.
* tie the policy types into the vm_phys path for now, mirroring how
the initial first-touch allocation work was enabled.
* add syscalls to control changing thread and process defaults.
* add a global NUMA VM domain policy.
* implement a simple cascade policy order - if a thread policy exists, use it;
if a process policy exists, use it; use the default policy.
* processes inherit policies from their parent processes, threads inherit
policies from their parent threads.
* add a simple tool (numactl) to query and modify default thread/process
policities.
* add documentation for the new syscalls, for numa and for numactl.
* re-enable first touch NUMA again by default, as now policies can be
set in a variety of methods.
This is only relevant for very specific workloads.
This doesn't pretend to be a final NUMA solution.
The previous defaults in -HEAD (with MAXMEMDOM set) can be achieved by
'sysctl vm.default_policy=rr'.
This is only relevant if MAXMEMDOM is set to something other than 1.
Ie, if you're using GENERIC or a modified kernel with non-NUMA, then
this is a glorified no-op for you.
Thank you to Norse Corp for giving me access to rather large
(for FreeBSD!) NUMA machines in order to develop and verify this.
Thank you to Dell for providing me with dual socket sandybridge
and westmere v3 hardware to do NUMA development with.
Thank you to Scott Long at Netflix for providing me with access
to the two-socket, four-domain haswell v3 hardware.
Thank you to Peter Holm for running the stress testing suite
against the NUMA branch during various stages of development!
Tested:
* MIPS (regression testing; non-NUMA)
* i386 (regression testing; non-NUMA GENERIC)
* amd64 (regression testing; non-NUMA GENERIC)
* westmere, 2 socket (thankyou norse!)
* sandy bridge, 2 socket (thankyou dell!)
* ivy bridge, 2 socket (thankyou norse!)
* westmere-EX, 4 socket / 1TB RAM (thankyou norse!)
* haswell, 2 socket (thankyou norse!)
* haswell v3, 2 socket (thankyou dell)
* haswell v3, 2x18 core (thankyou scott long / netflix!)
* Peter Holm ran a stress test suite on this work and found one
issue, but has not been able to verify it (it doesn't look NUMA
related, and he only saw it once over many testing runs.)
* I've tested bhyve instances running in fixed NUMA domains and cpusets;
all seems to work correctly.
Verified:
* intel-pcm - pcm-numa.x and pcm-memory.x, whilst selecting different
NUMA policies for processes under test.
Review:
This was reviewed through phabricator (https://reviews.freebsd.org/D2559)
as well as privately and via emails to freebsd-arch@. The git history
with specific attributes is available at https://github.com/erikarn/freebsd/
in the NUMA branch (https://github.com/erikarn/freebsd/compare/local/adrian_numa_policy).
This has been reviewed by a number of people (stas, rpaulo, kib, ngie,
wblock) but not achieved a clear consensus. My hope is that with further
exposure and testing more functionality can be implemented and evaluated.
Notes:
* The VM doesn't handle unbalanced domains very well, and if you have an overly
unbalanced memory setup whilst under high memory pressure, VM page allocation
may fail leading to a kernel panic. This was a problem in the past, but it's
much more easily triggered now with these tools.
* This work only controls the path through vm_phys; it doesn't yet strongly/predictably
affect contigmalloc, KVA placement, UMA, etc. So, driver placement of memory
isn't really guaranteed in any way. That's next on my plate.
Sponsored by: Norse Corp, Inc.; Dell
and psci to start them. I expect ACPI support to be added later.
This has been tested on qemu with 2 cpus as that is the current value of
MAXCPUS. This is expected to be increased in the future as FreeBSD has
been tested on 48 cores on the Cavium ThunderX hardware.
Partially based on a patch from Robin Randhawa from ARM.
Approved by: ABT Systems Ltd
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3024
CloudABI is a pure capability-based runtime environment for UNIX. It
works similar to Capsicum, except that processes already run in
capabilities mode on startup. All functionality that conflicts with this
model has been omitted, making it a compact binary interface that can be
supported by other operating systems without too much effort.
CloudABI is 'secure by default'; the idea is that it should be safe to
run arbitrary third-party binaries without requiring any explicit
hardware virtualization (Bhyve) or namespace virtualization (Jails). The
rights of an application are purely determined by the set of file
descriptors that you grant it on startup.
The datatypes and constants used by CloudABI's C library (cloudlibc) are
defined in separate files called syscalldefs_mi.h (pointer size
independent) and syscalldefs_md.h (pointer size dependent). We import
these files in sys/contrib/cloudabi and wrap around them in
cloudabi*_syscalldefs.h.
We then add stubs for all of the system calls in sys/compat/cloudabi or
sys/compat/cloudabi64, depending on whether the system call depends on
the pointer size. We only have nine system calls that depend on the
pointer size. If we ever want to support 32-bit binaries, we can simply
add sys/compat/cloudabi32 and implement these nine system calls again.
The next step is to send in code reviews for the individual system call
implementations, but also add a sysentvec, to allow CloudABI executabled
to be started through execve().
More information about CloudABI:
- GitHub: https://github.com/NuxiNL/cloudlibc
- Talk at BSDCan: https://www.youtube.com/watch?v=SVdF84x1EdA
Differential Revision: https://reviews.freebsd.org/D2848
Reviewed by: emaste, brooks
Obtained from: https://github.com/NuxiNL/freebsd
Add ARM ITS (Interrupt Translation Services) support required
to bring-up message signalled interrupts on some ARM64 platforms.
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Summary:
Both booke and AIM interrupt.c files contain nearly identical code. This merges
the two files, to reduce duplication.
Reviewers: #powerpc, marcel
Reviewed By: marcel
Subscribers: imp
Differential Revision: https://reviews.freebsd.org/D2991
directory sys/contrib/libnv.
The goal of this operation is to NOT install header files which shouldn't
be used outside the nvlist library.
Approved by: pjd (mentor)
make the find it does extremely expensive, so compute it only
once. Also make sure the 'traditional' module building method works at
the expense of a bit of duplicated code.
lightly used. Find the proper .m file when we depend on *_if.[ch] in
the srcs line, with seat-belts for false positive matches. This uses
make's path mechanism. A further refinement would be to calculate this
once, and then pass the resulting _MPATH to modules submakes.
Differential Revision: https://reviews.freebsd.org/D2327
* GENERAL
- Update copyright.
- Make kernel options for RANDOM_YARROW and RANDOM_DUMMY. Set
neither to ON, which means we want Fortuna
- If there is no 'device random' in the kernel, there will be NO
random(4) device in the kernel, and the KERN_ARND sysctl will
return nothing. With RANDOM_DUMMY there will be a random(4) that
always blocks.
- Repair kern.arandom (KERN_ARND sysctl). The old version went
through arc4random(9) and was a bit weird.
- Adjust arc4random stirring a bit - the existing code looks a little
suspect.
- Fix the nasty pre- and post-read overloading by providing explictit
functions to do these tasks.
- Redo read_random(9) so as to duplicate random(4)'s read internals.
This makes it a first-class citizen rather than a hack.
- Move stuff out of locked regions when it does not need to be
there.
- Trim RANDOM_DEBUG printfs. Some are excess to requirement, some
behind boot verbose.
- Use SYSINIT to sequence the startup.
- Fix init/deinit sysctl stuff.
- Make relevant sysctls also tunables.
- Add different harvesting "styles" to allow for different requirements
(direct, queue, fast).
- Add harvesting of FFS atime events. This needs to be checked for
weighing down the FS code.
- Add harvesting of slab allocator events. This needs to be checked for
weighing down the allocator code.
- Fix the random(9) manpage.
- Loadable modules are not present for now. These will be re-engineered
when the dust settles.
- Use macros for locks.
- Fix comments.
* src/share/man/...
- Update the man pages.
* src/etc/...
- The startup/shutdown work is done in D2924.
* src/UPDATING
- Add UPDATING announcement.
* src/sys/dev/random/build.sh
- Add copyright.
- Add libz for unit tests.
* src/sys/dev/random/dummy.c
- Remove; no longer needed. Functionality incorporated into randomdev.*.
* live_entropy_sources.c live_entropy_sources.h
- Remove; content moved.
- move content to randomdev.[ch] and optimise.
* src/sys/dev/random/random_adaptors.c src/sys/dev/random/random_adaptors.h
- Remove; plugability is no longer used. Compile-time algorithm
selection is the way to go.
* src/sys/dev/random/random_harvestq.c src/sys/dev/random/random_harvestq.h
- Add early (re)boot-time randomness caching.
* src/sys/dev/random/randomdev_soft.c src/sys/dev/random/randomdev_soft.h
- Remove; no longer needed.
* src/sys/dev/random/uint128.h
- Provide a fake uint128_t; if a real one ever arrived, we can use
that instead. All that is needed here is N=0, N++, N==0, and some
localised trickery is used to manufacture a 128-bit 0ULLL.
* src/sys/dev/random/unit_test.c src/sys/dev/random/unit_test.h
- Improve unit tests; previously the testing human needed clairvoyance;
now the test will do a basic check of compressibility. Clairvoyant
talent is still a good idea.
- This is still a long way off a proper unit test.
* src/sys/dev/random/fortuna.c src/sys/dev/random/fortuna.h
- Improve messy union to just uint128_t.
- Remove unneeded 'static struct fortuna_start_cache'.
- Tighten up up arithmetic.
- Provide a method to allow eternal junk to be introduced; harden
it against blatant by compress/hashing.
- Assert that locks are held correctly.
- Fix the nasty pre- and post-read overloading by providing explictit
functions to do these tasks.
- Turn into self-sufficient module (no longer requires randomdev_soft.[ch])
* src/sys/dev/random/yarrow.c src/sys/dev/random/yarrow.h
- Improve messy union to just uint128_t.
- Remove unneeded 'staic struct start_cache'.
- Tighten up up arithmetic.
- Provide a method to allow eternal junk to be introduced; harden
it against blatant by compress/hashing.
- Assert that locks are held correctly.
- Fix the nasty pre- and post-read overloading by providing explictit
functions to do these tasks.
- Turn into self-sufficient module (no longer requires randomdev_soft.[ch])
- Fix some magic numbers elsewhere used as FAST and SLOW.
Differential Revision: https://reviews.freebsd.org/D2025
Reviewed by: vsevolod,delphij,rwatson,trasz,jmg
Approved by: so (delphij)
The current linker script generates program headers with VMA == LMA:
Entry point 0xffffffff802e7000
There are 6 program headers, starting at offset 64
Program Headers:
Type Offset VirtAddr PhysAddr
FileSiz MemSiz Flags Align
PHDR 0x0000000000000040 0xffffffff80200040 0xffffffff80200040
0x0000000000000150 0x0000000000000150 R E 8
INTERP 0x0000000000000190 0xffffffff80200190 0xffffffff80200190
0x000000000000000d 0x000000000000000d R 1
[Requesting program interpreter: /red/herring]
LOAD 0x0000000000000000 0xffffffff80200000 0xffffffff80200000
0x00000000010559b0 0x00000000010559b0 R E 200000
LOAD 0x0000000001056000 0xffffffff81456000 0xffffffff81456000
0x0000000000132638 0x000000000052ecf8 RW 200000
DYNAMIC 0x0000000001056000 0xffffffff81456000 0xffffffff81456000
0x00000000000000d0 0x00000000000000d0 RW 8
GNU_STACK 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 RWE 8
This is fine for the FreeBSD loader, because it completely ignores p_paddr
and instead uses p_vaddr with a hardcoded offset. Other loaders however
acknowledge p_paddr (like the Xen ELF loader), in which case they will try
to load the kernel at the wrong place. Fix this by adding an AT keyword to
the first section specifying the physical address, other sections will
follow suit, so it ends up looking like:
Entry point 0xffffffff802e7000
There are 6 program headers, starting at offset 64
Program Headers:
Type Offset VirtAddr PhysAddr
FileSiz MemSiz Flags Align
PHDR 0x0000000000000040 0xffffffff80200040 0x0000000000200040
0x0000000000000150 0x0000000000000150 R E 8
INTERP 0x0000000000000190 0xffffffff80200190 0x0000000000200190
0x000000000000000d 0x000000000000000d R 1
[Requesting program interpreter: /red/herring]
LOAD 0x0000000000000000 0xffffffff80200000 0x0000000000200000
0x00000000010559b0 0x00000000010559b0 R E 200000
LOAD 0x0000000001056000 0xffffffff81456000 0x0000000001456000
0x0000000000132638 0x000000000052ecf8 RW 200000
DYNAMIC 0x0000000001056000 0xffffffff81456000 0x0000000001456000
0x00000000000000d0 0x00000000000000d0 RW 8
GNU_STACK 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 RWE 8
Tested on bare metal using the native FreeBSD loader and grub2 from TRUEOS.
Sponsored by: Citrix Systems R&D
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D2783
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
Work based on Cavium Thunder PCIe driver by Semihalf.
Reviewed by: andrew, jhb
Sponsored by: HEIF5
Differential Revision: https://reviews.freebsd.org/D2386
drivers, one for fdt, one for acpi. It then uses this to decide if it will
use fdt or acpi.
The GICv2 (interrupt controller) and Generic Timer drivers have been
updated to handle both cases.
As this is early code we still need FDT to find the kernel console, and
some parts are still missing, including PCI support.
Differential Revision: https://reviews.freebsd.org/D2463
Reviewed by: jhb, jkim, emaste
Obtained from: ABT Systems Ltd
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
This will require for AArch64 as we dont have modules yet.
Sponsored by: HEIF5
Sponsored by: ARM Ltd.
Differential Revision: https://reviews.freebsd.org/D1997
up to 2 rx/tx queues for the 82574.
Program the 82574 to enable 5 msix vectors, assign 1 to each rx queue,
1 to each tx queue and 1 to the link handler.
Inspired by DragonFlyBSD, enable some RSS logic for handling tx queue
handling/processing.
Move multiqueue handler functions so that they line up better in a diff
review to if_igb.c
Always enqueue tx work to be done in em_mq_start, if unable to acquire
the TX lock, then this will be processed in the background later by the
taskqueue. Remove mbuf argument from em_start_mq_locked() as the work
is always enqueued. (stolen from igb)
Setup TARC, TXDCTL and RXDCTL registers for better performance and stability
in multiqueue and singlequeue implementations. Handle Intel errata 3 and
generic multiqueue behavior with the initialization of TARC(0) and TARC(1)
Bind interrupt threads to cpus in order. (stolen from igb)
Add 2 new DDB functions, one to display the queue(s) and their settings and
one to reset the adapter. Primarily used for debugging.
In the multiqueue configuration, bump RXD and TXD ring size to max for the
adapter (4096). Setup an RDTR of 64 and an RADV of 128 in multiqueue configuration
to cut down on the number of interrupts. RADV was arbitrarily set to 2x RDTR
and can be adjusted as needed.
Cleanup the display in top a bit to make it clearer where the taskqueue threads
are running and what they should be doing.
Ensure that both queues are processed by em_local_timer() by writing them both
to the IMS register to generate soft interrupts.
Ensure that an soft interrupt is generated when em_msix_link() is run so that
any races between assertion of the link/status interrupt and a rx/tx interrupt
are handled.
Document existing tuneables: hw.em.eee_setting, hw.em.msix, hw.em.smart_pwr_down, hw.em.sbp
Document use of hw.em.num_queues and the new kernel option EM_MULTIQUEUE
Thanks to Intel for their continued support of FreeBSD.
Reviewed by: erj jfv hiren gnn wblock
Obtained from: Intel Corporation
MFC after: 2 weeks
Relnotes: Yes
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D1994
Leaf drivers should not import the PCI bus interface to add IOV handling.
Instead, move the IOV client methods to a separate kobj interface.
Differential Revision: https://reviews.freebsd.org/D2584
Reviewed by: rstone
Implement vdso - virtual dynamic shared object.
MFi386: r283474
Rework signal code to allow using it by other modules, like linprocfs.
MFi386: r283506
For objcopy, use --input-target and --output-target.
This fixes pc98 build.
Support 7xxx adapters including firmware-assisted TSO and VLAN tagging:
- Solarflare Flareon Ultra 7000 series 10/40G adapters:
- Solarflare SFN7042Q QSFP+ Server Adapter
- Solarflare SFN7142Q QSFP+ Server Adapter
- Solarflare Flareon Ultra 7000 series 10G adapters:
- Solarflare SFN7022F SFP+ Server Adapter
- Solarflare SFN7122F SFP+ Server Adapter
- Solarflare SFN7322F Precision Time Synchronization Server Adapter
- Solarflare Flareon 7000 series 10G adapters:
- Solarflare SFN7002F SFP+ Server Adapter
Support utilities to configure adapters and update firmware.
The work is done by Solarflare developers
(Andy Moreton, Andrew Lee and many others),
Artem V. Andreev <Artem.Andreev at oktetlabs.ru> and me.
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 weeks
Causually read by: gnn
Differential Revision: https://reviews.freebsd.org/D2618
When building with gcc 4.9 and binutils 2.25,
using '--input' and '--output' returns an error
message:
objcopy: option `--input' is ambiguous
Reported by: Jenkins
1. Linux sigset always 64 bit on all platforms. In order to move Linux
sigset code to the linux_common module define it as 64 bit int. Move
Linux sigset manipulation routines to the MI path.
2. Move Linux signal number definitions to the MI path. In general, they
are the same on all platforms except for a few signals.
3. Map Linux RT signals to the FreeBSD RT signals and hide signal conversion
tables to avoid conversion errors.
4. Emulate Linux SIGPWR signal via FreeBSD SIGRTMIN signal which is outside
of allowed on Linux signal numbers.
PR: 197216
around kqueue() to implement epoll subset of functionality.
The kqueue user data are 32bit on i386 which is not enough for
epoll user data, so we keep user data in the proc emuldata.
Initial patch developed by rdivacky@ in 2007, then extended
by Yuri Victorovich @ r255672 and finished by me
in collaboration with mjg@ and jillies@.
Differential Revision: https://reviews.freebsd.org/D1092
following primary purposes:
1. Remove the dependency of linsysfs and linprocfs modules from linux.ko,
which will be architecture specific on amd64.
2. Incorporate into linux_common.ko general code for platforms on which
we'll support two Linuxulator modules (for both instruction set - 32 & 64 bit).
3. Move malloc(9) declaration to linux_common.ko, to enable getting memory
usage statistics properly.
Currently linux_common.ko incorporates a code from linux_mib.c and linux_util.c
and linprocfs, linsysfs and linux kernel modules depend on linux_common.ko.
Temporarily remove dtrace garbage from linux_mib.c and linux_util.c
Differential Revision: https://reviews.freebsd.org/D1072
In collaboration with: Vassilis Laganakos.
Reviewed by: trasz
exposes functions from kernel with proper DWARF CFI information so that
it becomes easier to unwind through them.
Using vdso is a mandatory for a thread cancelation && cleanup
on a modern glibc.
Differential Revision: https://reviews.freebsd.org/D1060
we have both the Amlogic pic and a GIC. This may be the case in some
configurations.
Differential Revision: https://reviews.freebsd.org/D2432
Submitted by: John Wehle <john@feith.com>
needs to be enabled by adding "kern.racct.enable=1" to /boot/loader.conf.
Differential Revision: https://reviews.freebsd.org/D2407
Reviewed by: emaste@, wblock@
MFC after: 1 month
Relnotes: yes
Sponsored by: The FreeBSD Foundation
GICv3 allows to distribute interrupts to more than 8 cores served by
the previous GIC revisions. GICv3 introduces additional logic in form
of Re-Distributors associated with particular CPUs to determine
the highest priority interrupts and manage PPIs and LPIs
(Locality-specific Peripheral Interrupts). Interrupts routing is
based on CPUs' affinity numbers. CPU interface was changed to be
accessible via CPU System Registers and this is the preferred
(and supported) method in this driver.
Obtained from: Semihalf
Reviewed by: andrew, emaste, ian, imp
Sponsored by: The FreeBSD Foundation
Summary:
The Freescale PCIe Root Complex shows up as a Processor class device, PowerPC
subclass, so the generic PCI code ignores it for a bridge. This adds support
for it.
As part of this, update the Freescale PCI hostbridge driver, to allow probing
beyond the root complex, instead of only allowing "proper" PCI-PCI bridges.
Reviewers: #powerpc, marcel, nwhitehorn
Reviewed By: nwhitehorn
Subscribers: imp
Differential Revision: https://reviews.freebsd.org/D2442
Relnotes: yes
The x86 busdma subsystem allows using multiple implementations.
By default the classic bounce buffer approach is used, however
on systems with IOMMU it could be in runtime switched to more
efficient hardware accelerated implementation.
This commit adds ARM64 port of the x86 busdma framework and bounce
buffer backend. It is ready to use on IO coherent systems. If the
IO coherency cannot be guaranteed, the cache management operations have
to be added to this code in places marked by /* XXX ARM64TODO (...) */
comments. Also IOMMU support might be added by registering another
busdma implementation like it is already done on the x86.
Reviewed by: andrew, emaste
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
In order to map memory from other domains when running on Xen FreeBSD uses
unused physical memory regions. Until now this memory has been allocated
using bus_alloc_resource, but this is not completely safe as we can end up
using unreclaimed MMIO or ACPI regions.
Fix this by introducing a new newbus method that can be used by Xen drivers
to request for unused memory regions. On amd64 we make sure this memory
comes from regions above 4GB in order to prevent clashes with MMIO/ACPI
regions. On i386 there's nothing we can do, so just fall back to the
previous mechanism.
Sponsored by: Citrix Systems R&D
Tested by: Gustau Pérez <gperez@entel.upc.edu>
Summary:
This has been tested on the RB800, but should work on the RB333, RB600, and
RB1100 as well.
It's currently missing ECC support, but read and write are complete.
Reviewers: imp
Reviewed By: imp
Subscribers: imp
Differential Revision: https://reviews.freebsd.org/D2223
remains. Xen is planning to phase out support for PV upstream since it
is harder to maintain and has more overhead. Modern x86 CPUs include
virtualization extensions that support HVM guests instead of PV guests.
In addition, the PV code was i386 only and not as well maintained recently
as the HVM code.
- Remove the i386-only NATIVE option that was used to disable certain
components for PV kernels. These components are now standard as they
are on amd64.
- Remove !XENHVM bits from PV drivers.
- Remove various shims required for XEN (e.g. PT_UPDATES_FLUSH, LOAD_CR3,
etc.)
- Remove duplicate copy of <xen/features.h>.
- Remove unused, i386-only xenstored.h.
Differential Revision: https://reviews.freebsd.org/D2362
Reviewed by: royger
Tested by: royger (i386/amd64 HVM domU and amd64 PVH dom0)
Relnotes: yes
The point of this is to be able to add RACCT (with RACCT_DISABLED)
to GENERIC, to avoid having to rebuild the kernel to use rctl(8).
Differential Revision: https://reviews.freebsd.org/D2369
Reviewed by: kib@
MFC after: 1 month
Relnotes: yes
Sponsored by: The FreeBSD Foundation
- Vmbus multi channel support.
- Vector interrupt support.
- Signal optimization.
- Storvsc driver performance improvement.
- Scatter and gather support for storvsc driver.
- Minor bug fix for KVP driver.
Thanks royger, jhb and delphij from FreeBSD community for the reviews
and comments. Also thanks Hovy Xu from NetApp for the contributions to
the storvsc driver.
PR: 195238
Submitted by: whu
Reviewed by: royger, jhb, delphij
Approved by: royger
MFC after: 2 weeks
Relnotes: yes
Sponsored by: Microsoft OSTC
sys/amd64/amd64/mp_machdep.c, to the new common x86 source
sys/x86/x86/mp_x86.c.
Proposed and reviewed by: jhb
Review: https://reviews.freebsd.org/D2347
Sponsored by: The FreeBSD Foundation
It is not network-specific code and would
be better as part of libkern instead.
Move zlib.h and zutil.h from net/ to sys/
Update includes to use sys/zlib.h and sys/zutil.h instead of net/
Submitted by: Steve Kiernan stevek@juniper.net
Obtained from: Juniper Networks, Inc.
GitHub Pull Request: https://github.com/freebsd/freebsd/pull/28
Relnotes: yes
sys/i386/i386/machdep.c to new file sys/x86/x86/cpu_machdep.c. Most
of the code is related to the idle handling.
Discussed with: pluknet
Sponsored by: The FreeBSD Foundation
