Commit Graph

83 Commits

Author SHA1 Message Date
Rodney W. Grimes
71d20391bf In sd_get_params() the timeout for the MODE_SENSE command was too
short. I changed it from 2000 to 4000 and now my disk works fine.

Submitted by:	John Hay <jhay@mikom.csir.co.za>
1994-10-04 06:45:57 +00:00
Rodney W. Grimes
1c1483cb2a Pull in 1.1.5.1 changes to sd.c from 1.23 to 1.27 (basically the fixes for
drives that return sector counts of 0 and cause division by 0 traps during
the probe).
Reviewed by:	Dave <root@hclb.demon.co.uk>
Obtained from:	FreeBSD 1.1.5.1
1994-10-04 06:39:27 +00:00
Stefan Eßer
92a25df797 Reviewed by: Julian Elischer / Jordan K. Hubbard
Changes are only effective, if NEW_SCSICONF is defined:

1) Added u_int16 quirks to struct scsi_link for device quirks.
2) Added void *devmodes to struct scsi_link for tape density modes.
3) Modified selectdev() to return first full match (with wildcard).

With this patch all device dependent configuration is done in one place
(scsiconf.c), while there were some specifications in st.c and some
hardware dependent drivers (ie. ncr.c) before.
1994-09-28 20:16:45 +00:00
David Greenman
2c7a40c7ca Removed all vestiges of tlbflush(). Replaced them with calls to pmap_update().
Made pmap_update an inline assembly function.
1994-09-02 04:12:26 +00:00
David Greenman
9aba88bf29 Rather than exclude bounce buffers support with NOBOUNCE, include it
with BOUNCE_BUFFERS. This is more intuitive, and is better for future
multiplatform support. Added BOUNCE_BUFFERS option to the GENERIC and
LINT kernel config files.
1994-08-31 06:17:49 +00:00
Andrey A. Chernov
eda43f1aca Change RAW_PART back to 3, too early step right now, disklabels need more
work
Change hardcoded 3 value in several places to RAW_PART define
1994-08-30 14:31:38 +00:00
Jordan K. Hubbard
2de1d01ab8 Make decl/define for Debugger() match reality.
Submitted by:	jkh
1994-08-30 00:12:11 +00:00
Andrey A. Chernov
39a66415f6 RAW_PART=2 1994-08-29 21:37:49 +00:00
David Greenman
8a129caed5 1) Changed ddb into a option rather than a pseudo-device (use options DDB
in your kernel config now).
2) Added ps ddb function from 1.1.5. Cleaned it up a bit and moved into its
   own file.
3) Added \r handing in db_printf.
4) Added missing memory usage stats to statclock().
5) Added dummy function to pseudo_set so it will be emitted if there
   are no other pseudo declarations.
1994-08-27 16:14:39 +00:00
Rodney W. Grimes
26f9a76710 The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch.
Reviewed by:	Rodney W. Grimes
Submitted by:	John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
David Greenman
0e195446b7 Bug fixes and performance improvements from John Dyson and myself:
1) check va before clearing the page clean flag. Not doing so was
	causing the vnode pager error 5 messages when paging from
	NFS. (pmap.c)
2) put back interrupt protection in idle_loop. Bruce didn't think
	it was necessary, John insists that it is (and I agree). (swtch.s)
3) various improvements to the clustering code (vm_machdep.c). It's
	now enabled/used by default.
4) bad disk blocks are now handled properly when doing clustered IOs.
	(wd.c, vm_machdep.c)
5) bogus bad block handling fixed in wd.c.
6) algorithm improvements to the pageout/pagescan daemons. It's amazing
	how well 4MB machines work now.
1994-04-20 07:06:57 +00:00
David Greenman
1561d038b1 from John Dyson:
1) fixed some bugs related to the bounce buffer code
2) vnode pager now supports clustered pageouts
3) experimental code for clustering all I/O via a new "cldisksort"
4) added >16MB check to Bustek driver
5) made some experimental algorithmic changes to the pageout daemon
6) fixed bugs in truncating mapped files (esp when mapped via NFS)
7) reorganized vnode pager I/O code
1994-04-05 03:23:32 +00:00
David Greenman
d5e26ef0ef Bounce buffers. From John Dyson with help from me. 1994-03-23 09:16:04 +00:00
Andreas Schulz
ee3794ce7d Catch the divide by zero bug earlier. If the drive give back
a zero cylinder and/or head count, set them and the sector count
to some fictious values. The same already happens if the request
sense is unsuccessfull.
1994-03-15 20:49:09 +00:00
Andreas Schulz
d6e2315539 Put a safety check in for the secsiz divide for the MB printf. Else
we get a panic integer divide fault in the kernel if the drive returns
a bogus zero secsize.
1994-03-14 23:09:34 +00:00
David Greenman
e5be428b59 Fixed bug in dump code that caused the wrong physical page to be dumped. 1994-01-29 11:17:10 +00:00
Rodney W. Grimes
861e92cb98 Patch from Julian. Commit message by me.
cd.c:
Initialize channel info in CDIOCSETVOL ioctl.
Correct CDIOCSTOP and CDIOCEJCET ioctls to use scsi_stop_unit
instead of scsi_start_unit.
Add CDIOCALLOW and CDIOCPREVENT ioctls.

ch.h:
Return EBUSY instead of ENXIO if the device is already in use.

scsi_base.c:
Add scsi_stop_unit routine.

sd.c:
Add mising indirection through sc_link to sd_get_parms routine
when checking for media loaded.

st.c:
Return EBUSY instead of ENXIO if the device is already in use.
Clear the SDEV_WAITING flag in ststart if we do the wakeup call.
1994-01-29 10:30:41 +00:00
Rodney W. Grimes
d7820b925e Remove bogus and missleading comment, this has been fixed.
-       /* blkcnt = initialise_me; */
1994-01-22 11:05:16 +00:00
Rodney W. Grimes
37a08e7002 sddump code is now standard, no more options SDDUMP needed in the kernel
config file.
Fixed to not use pmap_enter as this causes side effects and other
problems like a page fault while trying to do the dump.
1994-01-06 18:08:03 +00:00
Garrett Wollman
aaf08d94ca Make everything compile with -Wtraditional. Make it easier to distribute
a binary link-kit.  Make all non-optional options (pagers, procfs) standard,
and update LINT to reflect new symtab requirements.

NB: -Wtraditional will henceforth be forgotten.  This editing pass was
primarily intended to detect any constructions where the old code might
have been relying on traditional C semantics or syntax.  These were all
fixed, and the result of fixing some of them means that -Wall is now a
realistic possibility within a few weeks.
1993-12-19 00:55:01 +00:00
Garrett Wollman
381fe1aaf4 Make the LINT kernel compile with -W -Wreturn-type -Wcomment -Werror, and
add same (sans -Werror) to Makefile for future compilations.
1993-11-25 01:38:01 +00:00
Rodney W. Grimes
57bb0ee45f New version of scsi code from Julian 1993-11-18 05:03:27 +00:00
Rodney W. Grimes
e95e7fce8a Increase timeout in sd_start_unit procedure from 2000 to 6000, per Adam David 1993-11-08 12:11:01 +00:00
Rodney W. Grimes
06a1e2ded2 Increase the timeout from 2000 counts to 6000 counts, reported by someone
on the net (I lost the mail).  This should fix some units not showing up
during probes.
1993-09-20 06:28:13 +00:00
Rodney W. Grimes
968d6ea058 The dynamically allocated struct's where not getting properly initialized
as malloc memory is NOT zerod.  Added bzero's after the malloc calls
to make sure that things are initialized.

>From Julian Elischer
1993-09-20 06:27:06 +00:00
Andreas Schulz
3400567027 Fixed a small typo in an error printf. 1993-09-10 18:03:21 +00:00
Rodney W. Grimes
5c8830eef2 Changed the delay from 100 seconds to 20 seconds if you don't have scsi
dump code.
1993-09-09 01:30:46 +00:00
Rodney W. Grimes
a3e4335498 Revised drivers from Julian. Support for generic scsi. Fixed scsi tape (st.c)
problems with respect to multiple tar files on one tape.  Now uses malloc
of data structures to reduce static kernel size.
1993-08-28 03:08:59 +00:00
Rodney W. Grimes
296cbdb15b Fixed printf's so that they announce them selfs correctly (ie aha%d: before
every error message and every probe message).
1993-08-21 20:01:59 +00:00
Rodney W. Grimes
e5cf9f6134 Update scsi code to the latest from Julian. This code is now identical
to the last copy from Julian.  After this commit I will be commiting the
local fixes and makeing diffs to send back to Julian so he can update his
code.

----
From julian@jules.DIALix.oz.au  Thu Aug  5 09:25:23 1993
To: hd@world.std.com, julian@jules.DIALix.oz.au
Cc: nate@bsd.coe.montana.edu
Subject: Re: new scsi

----
From julian@jules.DIALix.oz.au  Sat Aug  7 04:13:17 1993
To: hd@world.std.com (HD Associates)
Cc: nate@bsd.coe.montana.edu
Subject: Re: timeout diffs

Here are the diffs to take the scsi stuff to my latest tree from what
Nate and you received..

the changes remove all the local timeout stuff and use (un)timeout(),

----
From julian@jules.DIALix.oz.au  Sat Aug  7 04:13:45 1993
To: hd@world.std.com (HD Associates)
Cc: nate@bsd.coe.montana.edu, briggs@csugrad.cs.vt.edu

here is a fix for a silly bug in the scsiconf I just sent out
and a similar fix for st.c
1993-08-20 09:23:30 +00:00
Rodney W. Grimes
903a4691a3 Removed tabs from the front of XXU: messages to make it fit the other
messages closer.  Added missing new line to the message about to many
scsi cd drives.
1993-08-06 12:11:52 +00:00
Nate Williams
d97875d4b0 Removed PATCHKIT headers and updated our sources to Julian's with
our patches back in.  Major changes to the Bustek driver and the
Tape driver, the rest are minor.
1993-07-29 11:49:13 +00:00
Rodney W. Grimes
5b81b6b301 Initial import, 0.1 + pk 0.2.4-B1 1993-06-12 14:58:17 +00:00