Cameron Grant
8ae4c159aa
more mmap fixes
2000-04-17 17:06:47 +00:00
Cameron Grant
674c45bd04
make drivers start at beginning of buffer when triggered - improves mmap.
...
not all tested.
not sure about aureal.c or csapcm.c
2000-04-17 16:57:12 +00:00
Cameron Grant
603ddb6d5d
make mmap sort-of work. there seem to be interactions with certain hw
...
drivers, so still work in progress.
do various mmap-related ioctls right.
improve blocksize control.
bits of cleanup.
2000-04-15 05:04:12 +00:00
Cameron Grant
7c7f2a4a81
make poll() dtrt, previously when playing it would trigger if there was less
...
than 1 byte ready to play instead of room for at least 1 byte to be written.
similarly for recording.
2000-04-05 05:54:02 +00:00
Cameron Grant
2d3ce9d56e
decrease buffer size to 4k
...
use a seperate channel for generating irqs so we get a buffer-half-empty
interrupt, prevents repeating on underflow
2000-04-05 02:14:26 +00:00
Cameron Grant
bd18f33408
allow /dev/dsp to be opened seperately for reading and writing.
2000-04-05 01:13:42 +00:00
Cameron Grant
119a24a450
try increasing 2ndbuffer size to 64k
2000-04-05 00:56:02 +00:00
Cameron Grant
8b455f8d05
move buffer size definition to .c file for consistency, and reduce it to 4k
2000-04-05 00:38:00 +00:00
Cameron Grant
97b3c9d804
make the click on starting output go away
2000-04-04 02:16:15 +00:00
Cameron Grant
8046c76306
fix missing defines and prototype for emu_vdump()
2000-04-03 00:28:43 +00:00
Cameron Grant
c067afaa06
unfinished sblive driver, playback/mixer only for now - not enabled in
...
conf/files
i don't seem to be clearing the cache right resulting in a short initial
burst of noise, despite doing the same as creative and alsa. i'm committing
now so more eyes can pore over the code.
2000-04-02 07:41:17 +00:00
Cameron Grant
e620d95952
fail in attach if we seem to have no ac97 codec
2000-04-01 22:24:03 +00:00
Cameron Grant
0a3eb835c2
bump the buffer size from 4k to 16k. should improve performance under load.
2000-04-01 21:28:09 +00:00
Cameron Grant
57376530f0
split up ess and sb code
...
rewrite ess mixer to use native registers
rewrite play/rec code to use more accurate timer when available
add code to use audio2 for playback, but disable it as no irqs are generated
2000-03-28 18:31:01 +00:00
Cameron Grant
6b4b88f7a2
don't check extended features on codecs known to hang. should fix neomagic
...
problems.
2000-03-24 03:14:35 +00:00
Cameron Grant
87374c3d7a
toast warnings on i386
2000-03-20 15:50:08 +00:00
Cameron Grant
3252a47be9
make als120 cards which report dsp version 3.x whilst only supporting 4.x
...
and *not* 3.x commands work
2000-03-20 15:34:27 +00:00
Cameron Grant
39004e693d
update the ac97 layer:
...
* add a callback for initialising the mixer interface
* support ac97 2.1 variable rate audio feature
fix ac97-using drivers for the above
add suspend/resume support for neomagic
2000-03-20 15:30:50 +00:00
Cameron Grant
a0b4946276
add a function to reinitialize the mixer, to be called by drivers on
...
resuming after suspend
2000-03-20 15:21:50 +00:00
Nick Hibma
efb572af98
Spelling mistake
2000-03-15 22:11:00 +00:00
Poul-Henning Kamp
d8b47cbb70
Stop isadma from abusing the B_READ, B_RAW and B_WRITE flags.
...
Define ISADMA_{READ,WRITE,RAW} macros with the same numeric
values as the B_{READ,WRITE,RAW} and use them instead throughout.
2000-03-13 10:19:32 +00:00
Seigo Tanimura
ca6da1de5e
Add the logical ID of Avance Logic ALS100. The vendor ID is also
...
checked, which was introduced in 1.18.
PR: kern/16487
Submitted by: Oliver Fromme <oliver.fromme@heim3.tu-clausthal.de>
Approved by: jkh
2000-03-09 02:13:21 +00:00
Cameron Grant
1a7d73a130
Partial fix: the following patch correctly configures the card for dual
...
channel DMA. The problem was that the SDC bit (0x04) can only be set in
the MCE state.
PR: kern/16587
Submitted by: Matthew Reimer <mreimer@vpop.net>
Approved by: jkh (in person)
2000-03-05 15:51:09 +00:00
Cameron Grant
73bd6f4aab
fix ess end-of-buffer repeating
...
Submitted by: nhibma
Approved by: jkh
2000-02-14 23:37:02 +00:00
Peter Wemm
5775b1a2b6
Tidy up stray or bogus #if NFOO > 0 and #include "foo.h".
2000-01-29 18:48:30 +00:00
Peter Wemm
96e00123b4
Remove a rather bizzare set of #ifdefs and #defines that all worked out
...
to be a NO-OP.
2000-01-29 18:44:01 +00:00
Cameron Grant
a05382d9ae
differentiate cmi8330 and als100 pnp cards based on their vendor id. this
...
is a kludge for 4.0
2000-01-29 00:18:29 +00:00
Andrew Gallatin
de6d75328e
Add support for detection of the ESS 1688 found on my Dell Latitude LM
2000-01-28 04:28:11 +00:00
Cameron Grant
45248baa3c
handle simplex devices right
2000-01-26 20:27:45 +00:00
Peter Wemm
a3a2b1e1b2
Note the PnP id's for the NMX2210 next to the id's where they are used.
...
The pnpbios doesn't supply a description in the case we've seen so
supply one.
2000-01-23 13:17:03 +00:00
Seigo Tanimura
8f7076b8ff
The pointer of the serial FIFO in the DSP seems to make an error
...
upon starting/stopping the DSP. Correct the pointer in addition
to clearing the FIFO.
2000-01-23 07:04:02 +00:00
Cameron Grant
f2410ff244
kludge to fix the end-of-sample repeating bug. i don't know why it happens;
...
none of my hw does it, but this should fix it for now.
Tested by: wpaul
2000-01-18 18:59:03 +00:00
Cameron Grant
03a00905d3
update ac97 layer to use device_printf when printing messages
2000-01-18 17:13:43 +00:00
Peter Wemm
615407b5a0
Some SB128's (ES1371) have a different PCI vendor id. Vendor == 0x3274
...
instead of the normal 0x1274.
Tested by: des
2000-01-17 07:54:00 +00:00
Cameron Grant
9bc502089a
fix missing \n in sndstat output
2000-01-16 12:52:22 +00:00
Cameron Grant
0a12fe07e7
oops, best play format was set to unsigned 16 bit instead of signed 16 bit
...
stereo. remenant from testing.
2000-01-16 12:05:07 +00:00
Cameron Grant
724efc44ec
attach to non-ac97 neomagic chips and hope that ac97 ones do not have the
...
same pnpbios id
2000-01-13 06:11:32 +00:00
Cameron Grant
5b4c3f3ca0
be less verbose
2000-01-13 06:00:57 +00:00
Daniel Eischen
d404cb51ee
Add support for detection of the ESS 1878 chip.
2000-01-12 11:16:23 +00:00
Cameron Grant
e7fb32964c
exclude chips with subdevices specified on a list of non-ac97 chips
2000-01-11 10:37:16 +00:00
Cameron Grant
898cb2af53
make dsp_read() assert that it has a read channel, not a write channel
...
Submitted by: green
2000-01-10 07:05:15 +00:00
Cameron Grant
10b23f4c02
don't complain about bad intrs unless we get 1000 of them consecutively
...
whilst we are playing or recording. since we should irq ~20 times/sec when
active, this should never trigger. in theory. if it never does trigger,
the check will be removed.
2000-01-10 06:19:20 +00:00
Cameron Grant
9090c22ce7
general tidyup
2000-01-10 03:22:28 +00:00
Cameron Grant
4ee074718b
return the sample rate set instead of 0. oops. mpg123 should now work.
2000-01-10 01:59:12 +00:00
Cameron Grant
147d35e8b3
fix the premature termination of playback
2000-01-09 08:32:49 +00:00
Cameron Grant
d5fa8408e6
driver for neomagic 256av and 256zx
...
Obtained from: anonymous author, heavily derived
2000-01-09 08:14:11 +00:00
Cameron Grant
bf8ca271a3
modify sndstat output
2000-01-09 08:07:46 +00:00
Cameron Grant
833f702348
allow mixer-only devices - ie, devices with no play/rec channels
2000-01-06 04:11:36 +00:00
Cameron Grant
bbb5bf3d69
don't panic if channel init fails, report and fail gracefully
2000-01-05 20:44:41 +00:00
Cameron Grant
2abc85f0c0
argh, forgot the bus_dma_tag_creates.
...
also, panic if channel init fails instead of derefing null.
2000-01-05 04:01:34 +00:00