OBJ_ONEMAPPING flag is set. In other words, allow recycling of existing
but unused subranges of a vm object when the OBJ_ONEMAPPING flag is set.
Such situations are increasingly common with jemalloc >= 5.0. This
change has the expected effect of reducing the number of vm map entry and
object allocations and increasing the number of superpage promotions.
Reviewed by: kib, markj
Tested by: pho
MFC after: 6 weeks
Differential Revision: https://reviews.freebsd.org/D16501
The buffer descriptor list entries should be in little endian format. Byte swap
them on BE. This is the last piece of the puzzle for snd_hda(4) to work on
PowerPC.
The interface uses struct timespec, which needs a translation.
Reported and reviewed by: asomers
PR: 230175
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D16525
This is prep for pkging base and helps tag and install config files with the
correct packages.
Approved by: bapt (mentor)
Differential Revision: https://reviews.freebsd.org/D16493
The Tag_ABI_VFP_args build attribute controls the procedure call
standard used for floating point parameters on ARM. The values are:
0 - Base AAPCS (FP Parameters passed in Core (Integer) registers
1 - VFP AAPCS (FP Parameters passed in FP registers)
2 - Toolchain specific (Neither Base or VFP)
3 - Compatible with all (No use of floating point parameters)
If the Tag_ABI_VFP_args build attribute is missing it has an implicit
value of 0.
We use the attribute in two ways:
* Detect a clash in calling convention between Base, VFP and Toolchain.
we follow ld.bfd's lead and do not error if there is a clash between an
implicit Base AAPCS caused by a missing attribute. Many projects
including the hard-float (VFP AAPCS) version of glibc contain assembler
files that do not use floating point but do not have Tag_ABI_VFP_args.
* Set the EF_ARM_ABI_FLOAT_SOFT or EF_ARM_ABI_FLOAT_HARD ELF header flag
for Base or VFP AAPCS respectively. This flag is used by some ELF
loaders.
References:
* Addenda to, and Errata in, the ABI for the ARM Architecture for
Tag_ABI_VFP_args
* Elf for the ARM Architecture for ELF header flags
Fixes LLVM PR36009
PR: 229050
Obtained from: llvm r338377 by Peter Smith
The LLD implementation of Tag_ABI_VFP_args needs to check the rarely
seen values of 3 (toolchain specific) and 4 compatible with both Base
and VFP. Add the missing enumeration values so that LLD can refer to
them without having to use the raw numbers.
Obtained from: llvm r338373 by Peter Smith
The ELF for the Arm architecture document defines, for EF_ARM_EABI_VER5
and above, the flags EF_ARM_ABI_FLOAT_HARD and EF_ARM_ABI_FLOAT_SOFT.
These have been defined to be compatible with the existing
EF_ARM_VFP_FLOAT and EF_ARM_SOFT_FLOAT used by gcc for
EF_ARM_EABI_UNKNOWN.
This patch adds the flags in addition to the existing ones so that any
code depending on the old names will still work.
Obtained from: llvm r338370 by Peter Smith
This calls into the Arm Trusted Firmware to enable and disable the
workaround for the Speculative Store Bypass Disable (SSBD) issue, also
known as Spectre Variant 4.
As this may have a large performance overhead, and how exploitable SSBD is
is unknown we follow the Linux lead of allowing the administrator to select
between always on, always off, or only enabled in the kernel, with the
latter being the default.
PR: 228955
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15819
Else a NULL VNET pointer should be ignored. This fixes address resolving
when VIMAGE is disabled.
MFC after: 3 days
Sponsored by: Mellanox Technologies
r336940 introduced an "unused variable" warning on platforms which
support INET, but not INET6, like MALTA and MALTA64 as reported
by Mark Millard. Improve the #ifdefs to address this issue.
Sponsored by: Netflix, Inc.
illumos/illummos-gate@df477c0afa
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Paul Dagnelie <pcd@delphix.com>
illumos/illummos-gate@df477c0afa
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Paul Dagnelie <pcd@delphix.com>
This project's goal is to make read-heavy channel programs and zfs(1m)
administrative commands faster by caching all the metadata that they will
need in the dbuf layer. This will prevent the data from being evicted, so
that any future call to i.e. zfs get all won't have to go to disk (very
much).
illumos/illumos-gate@adb52d9262
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Thomas Caputi <tcaputi@datto.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
This project's goal is to make read-heavy channel programs and zfs(1m)
administrative commands faster by caching all the metadata that they will
need in the dbuf layer. This will prevent the data from being evicted, so
that any future call to i.e. zfs get all won't have to go to disk (very
much).
illumos/illumos-gate@adb52d9262
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Thomas Caputi <tcaputi@datto.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
If an error occurs while copying a SCM_RIGHTS message to userspace,
we free the mbuf containing externalized rights, leaking them.
PR: 131876
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
We should use zfs_dbgmsg instead of spa_dbgmsg. Or at least,
metaslab_condense() should call zfs_dbgmsg because it's important and rare
enough to always log. It's possible that the message in zio_dva_allocate()
would be too high-frequency for zfs_dbgmsg.
illumos/illumos-gate@21f7c81cc1
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
We should use zfs_dbgmsg instead of spa_dbgmsg. Or at least,
metaslab_condense() should call zfs_dbgmsg because it's important and rare
enough to always log. It's possible that the message in zio_dva_allocate()
would be too high-frequency for zfs_dbgmsg.
illumos/illumos-gate@21f7c81cc1
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
Currently vdev_label_sync and vdev_uberblock_sync take a zio_t and assume
that its io_private is a pointer to the good_writes count. They should
instead accept this argument explicitly.
illumos/illumos-gate@a3b5583021
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
Currently vdev_label_sync and vdev_uberblock_sync take a zio_t and assume
that its io_private is a pointer to the good_writes count. They should
instead accept this argument explicitly.
illumos/illumos-gate@a3b5583021
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
Mirrors are supposed to provide redundancy in the face of whole-disk failure
and silent damage (e.g. some data on disk is not right, but ZFS hasn't
detected the whole device as being broken). However, the current device
removal implementation bypasses some of the mirror's redundancy.
illumos/illumos-gate@3a4b1be953
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Reviewed by: Sara Hartse <sara.hartse@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Tim Chase <tim@chase2k.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
Mirrors are supposed to provide redundancy in the face of whole-disk failure
and silent damage (e.g. some data on disk is not right, but ZFS hasn't
detected the whole device as being broken). However, the current device
removal implementation bypasses some of the mirror's redundancy.
illumos/illumos-gate@3a4b1be953
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Reviewed by: Sara Hartse <sara.hartse@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Tim Chase <tim@chase2k.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
On high-end systems running async sequential write workloads, especially
NUMA systems with flash or NVMe storage, one significant performance
bottleneck is selecting a metaslab to do allocations from. This process
can be parallelized, providing significant performance increases for
these workloads.
illumos/illumos-gate@f78cdc34af
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Alexander Motin <mav@FreeBSD.org>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Paul Dagnelie <pcd@delphix.com>
On high-end systems running async sequential write workloads, especially
NUMA systems with flash or NVMe storage, one significant performance
bottleneck is selecting a metaslab to do allocations from. This process
can be parallelized, providing significant performance increases for
these workloads.
illumos/illumos-gate@f78cdc34af
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Alexander Motin <mav@FreeBSD.org>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Paul Dagnelie <pcd@delphix.com>
The current space map encoding has the following disadvantages:
[1] Assuming 512 sector size each entry can represent at most 16MB for a segment.
This makes the encoding very inefficient for large regions of space.
[2] As vdev-wide space maps have started to be used by new features (i.e.
device removal, zpool checkpoint) we've started imposing limits in the
vdevs that can be used with them based on the maximum addressable offset
(currently 64PB for a top-level vdev).
The new remains backwards compatible with the old one. The introduced
two-word entry format, besides extending the limits imposed by the single-entry
layout, also includes a vdev field and some extra padding after its prefix.
The extra padding after the prefix should is reserved for future usage (e.g.
new prefixes for future encodings or new fields for flags). The new vdev field
not only makes the space maps more self-descriptive, but also opens the doors
for pool-wide space maps.
One final important note is that the number of bits used for vdevs is reduced
to 24 bits for blkptrs. That was decided as we don't know of any setups that
use more than 16M vdevs for the time being and
we wanted to fit the vdev field in the space map. In addition that gives us
some extra bits in dva_t.
illumos/illumos-gate@17f11284b4
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <gwilson@zfsmail.com>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Serapheim Dimitropoulos <serapheim@delphix.com>
The current space map encoding has the following disadvantages:
[1] Assuming 512 sector size each entry can represent at most 16MB for a segment.
This makes the encoding very inefficient for large regions of space.
[2] As vdev-wide space maps have started to be used by new features (i.e.
device removal, zpool checkpoint) we've started imposing limits in the
vdevs that can be used with them based on the maximum addressable offset
(currently 64PB for a top-level vdev).
The new remains backwards compatible with the old one. The introduced
two-word entry format, besides extending the limits imposed by the single-entry
layout, also includes a vdev field and some extra padding after its prefix.
The extra padding after the prefix should is reserved for future usage (e.g.
new prefixes for future encodings or new fields for flags). The new vdev field
not only makes the space maps more self-descriptive, but also opens the doors
for pool-wide space maps.
One final important note is that the number of bits used for vdevs is reduced
to 24 bits for blkptrs. That was decided as we don't know of any setups that
use more than 16M vdevs for the time being and
we wanted to fit the vdev field in the space map. In addition that gives us
some extra bits in dva_t.
illumos/illumos-gate@17f11284b4
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <gwilson@zfsmail.com>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Serapheim Dimitropoulos <serapheim@delphix.com>
When a ZFS volume is created with zfs create -V (but without -s), the
refreservation property is set to a value that is volsize plus the maximum
size of metadata. If refreservation is ever set to another value, it is
impossible to set it back to the automatically determined value. There are
other cases where refreservation may be wrong. These include receiving a
volume that was sent without properties and zfs clone.
We need:
zfs set refreservation=auto <volume>
zfs clone -o refreservation=auto <volume>
Each one would use the same function used by zfs create -V to determine the
proper value for refreservation.
illumos/illumos-gate@1c10ae76c0
Reviewed by: Allan Jude <allanjude@freebsd.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Andy Stormont <astormont@racktopsystems.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Mike Gerdts <mike.gerdts@joyent.com>
When a ZFS volume is created with zfs create -V (but without -s), the
refreservation property is set to a value that is volsize plus the maximum
size of metadata. If refreservation is ever set to another value, it is
impossible to set it back to the automatically determined value. There are
other cases where refreservation may be wrong. These include receiving a
volume that was sent without properties and zfs clone.
We need:
zfs set refreservation=auto <volume>
zfs clone -o refreservation=auto <volume>
Each one would use the same function used by zfs create -V to determine the
proper value for refreservation.
illumos/illumos-gate@1c10ae76c0
Reviewed by: Allan Jude <allanjude@freebsd.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Andy Stormont <astormont@racktopsystems.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Mike Gerdts <mike.gerdts@joyent.com>
illumos/illumos-gate@b6bf6e1540
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Approved by: Matt Ahrens <mahrens@delphix.com>
Author: Pavel Zakharov <pavel.zakharov@delphix.com>
illumos/illumos-gate@b6bf6e1540
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Approved by: Matt Ahrens <mahrens@delphix.com>
Author: Pavel Zakharov <pavel.zakharov@delphix.com>
TCP/IPv4 allows an implicit connection setup using sendto(), which
is used for TTCP and TCP fast open. This patch adds support for
TCP/IPv6.
While there, improve some tests for detecting multicast addresses,
which are mapped.
Reviewed by: bz@, kbowling@, rrs@
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D16458
When sending TCP segments from the timewait code path, a stored
value of the last sent window is used. Use the same code for
computing this in the timewait code path as in the main code
path used in tcp_output() to avoiv inconsistencies.
Reviewed by: rrs@
MFC after: 1 month
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D16503
The following issues are fixed:
* Whenever a TCP server with TCP fast open enabled, calls accept(),
recv(), send(), and close() before the TCP-ACK segment has been received,
the TCP connection is just dropped and the reception of the TCP-ACK
segment triggers the sending of a TCP-RST segment.
* Whenever a TCP server with TCP fast open enabled, calls accept(), recv(),
send(), send(), and close() before the TCP-ACK segment has been received,
the first byte provided in the second send call is not transferred.
* Whenever a TCP client with TCP fast open enabled calls sendto() followed
by close() the TCP connection is just dropped.
Reviewed by: jtl@, kbowling@, rrs@
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D16485
Newer versions of gcc generate "set, but not used" warnings.
Add __unused macros to silence these warnings.
Although the variables are not being used, they are values parsed from
arguments to callback RPCs that might be needed in the future.
Requested by: mmacy
These missing probe are mostly in the syncache and timewait code.
Reviewed by: markj@, rrs@
MFC after: 1 month
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D16369
The CORB and RIRB buffers exist in DMA memory, but the device reads them as
little-endian only. Read and write as LE into the DMA memory block, to work on
BE platforms.
`arc_reclaim_thread()` calls `arc_adjust()` after calling
`arc_kmem_reap_now()`; `arc_adjust()` signals `arc_get_data_buf()` to
indicate that we may no longer be `arc_is_overflowing()`.
The problem is, `arc_kmem_reap_now()` can take several seconds to
complete, has no impact on `arc_is_overflowing()`, but due to how the
code is structured, can impact how long the ARC will remain in the
`arc_is_overflowing()` state.
The fix is to use seperate threads to:
1. keep `arc_size` under `arc_c`, by calling `arc_adjust()`, which
improves `arc_is_overflowing()`
2. keep enough free memory in the system, by calling
`arc_kmem_reap_now()` plus `arc_shrink()`, which improves
`arc_available_memory()`.
illumos/illumos-gate@de753e34f9
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Dan McDonald <danmcd@joyent.com>
Reviewed by: Tim Kordas <tim.kordas@joyent.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: Brad Lewis <brad.lewis@delphix.com>
