- Right justify 'pid' label.
- Move the uid column to the right 2 columns so that the 3 process id
columns (pid, ppid, pgrp) are grouped together.
- Expand the uid column to 5 chars.
- Don't indent the tid for multithreaded processes.
Requested by: bde (1, 2, 4)
longer referenced by other threads (hence our freeing it), we don't need
to set the can't send and can't receive flags, wake up the consumers,
perform two levels of locking, etc. Implement a fast-path teardown,
sbdestroy(), which flushes and releases each socket buffer. A manual
dom_dispose of the receive buffer is still required explicitly to GC
any in-flight file descriptors, etc, before flushing the buffer.
This results in a 9% UP performance improvement and 16% SMP performance
improvement on a tight loop of socket();close(); in micro-benchmarking,
but will likely also affect CPU-bound macro-benchmark performance.
UNIX domain socket at the same time as the remote host is closing the
new connections as quickly as they open. Since the connect() and
send() paths are non-atomic with respect to another, it is possible
for the second thread's close() call to disconnect the two sockets
as connect() returns, leading to the consumer (which plans to send())
with a NULL kernel pointer to its proposed peer. As a result, after
acquiring the UNIX domain socket subsystem lock, we need to revalidate
the connection pointers even though connect() has technically succeed,
and reurn an error to say that there's no connection on which to
perform the send.
We might want to rethink the specific errno number, perhaps ECONNRESET
would be better.
PR: 100940
Reported by: Young Hyun <youngh at caida dot org>
MFC after: 2 weeks
MFC note: Some adaptation will be required
crunched floppies, but they can be included as options in
src/release/picobsd (omitted by default though.) Therefore
preserve the RELEASE_CRUNCH knob in their Makefiles, but
tell its real purpose in a comment.
characters correctly. These characters are displayed "combined"
with a space character.
PR: misc/100215
Submitted by: "J.R. Oldroyd" <<fbsd AT opal.com>>
Reviewed by: "J.R. Oldroyd" <<fbsd AT opal.com>> (revised patch)
MFC after: 3 days
- Correct the PCI ID for the 8169SC/8110SC in the device list (I added
the macro for it to if_rlreg.h before, but forgot to use it.)
- Remove the extra interrupt spinlock I added previously. After giving it
some more thought, it's not really needed.
- Work around a hardware bug in some versions of the 8169. When sending
very small IP datagrams with checksum offload enabled, a conflict can
occur between the TX autopadding feature and the hardware checksumming
that can corrupt the outbound packet. This is the reason that checksum
offload sometimes breaks NFS: if you're using NFS over UDP, and you're
very unlucky, you might find yourself doing a fragmented NFS write where
the last fragment is smaller than the minimum ethernet frame size (60
bytes). (It's rare, but if you keep NFS running long enough it'll
happen.) If checksum offload is enabled, the chip will have to both
autopad the fragment and calculate its checksum header. This confuses
some revs of the 8169, causing the packet that appears on the wire
to be corrupted. (The IP addresses and the checksum field are mangled.)
This will cause the NFS write to fail. Unfortunately, when NFS retries,
it sends the same write request over and over again, and it keeps
failing, so NFS stays wedged.
(A simple way to provoke the failure is to connect the failing system
to a network with a known good machine and do "ping -s 1473 <badhost>"
from the good system. The ping will fail.)
Someone had previously worked around this using the heavy-handed
approahch of just disabling checksum offload. The correct fix is to
manually pad short frames where the TCP/IP stack has requested
checksum offloading. This allows us to have checksum offload turned
on by default but still let NFS work right.
- Not a bug, but change the ID strings for devices with hardware rev
0x30000000 and 0x38000000 to both be 8168B/8111B. According to RealTek,
they're both the same device, but 0x30000000 is an earlier silicon spin.
This was missed the first time around since eng_padlock.c was not part
of OpenSSL 0.9.7e and therefor did not have the v0_9_7e CVS tag used
during original resolve of conflicts.
Noticed by: Antoine Brodin <antoine.brodin@laposte.net>
increases performance when extracting a single entry from a large
uncompressed archive, especially on slow devices such as USB hard
drives.
Requires a number of changes:
* New archive_read_open2() supports a 'skip' client function
* Old archive_read_open() is implemented as a wrapper now, to
continue supporting the old API/ABI.
* _read_open_fd and _read_open_file sprout new 'skip' functions.
* compression layer gets a new 'skip' operation.
* compression_none passes skip requests through to client.
* compression_{gzip,bzip2,compress} simply ignore skip requests.
Thanks to: Benjamin Lutz, who designed and implemented the whole thing.
I'm just committing it. ;-)
TODO: Need to update the documentation a little bit.
pax wasn't introduced until the 1993 (?) revision.
(I need to double-check when pax was introduced and
clarify some of the history here. In particular,
I should explain that the 'pax' standard now owns the
'ustar' format spec.)
perform the reboot action via the reset register instead of our legacy
method. Default is 0 (use legacy). This is needed because some systems
hang on reboot even though they claim to support the reset register.
MFC after: 2 days
cannot easily be analyzed due to there being no debugger yet.
The SIGSEGV only happens when kldxref is linked shared.
Since kldxref(8) is needed for a release build, having it not
dump core is important.
that immediately follows the only call to it. maketempfile() uses
mkstemp(), so the temporary file has already been opened and using
fopen() again just opens the file twice. This also fixes the invalid
mode used on the fopen().
While here, assign NULL to fxref after fclose() because we test for
fxref being !NULL to determine if we have the (temporary) hints file
open.
and pc98 MD files. Remove nodevice and nooption lines specific
to sio(4) from ia64, powerpc and sparc64 NOTES. There were no
such lines for arm yet.
sio(4) is usable on less than half the platforms, not counting
a future mips platform. Its presence in MI files is therefore
increasingly becoming a burden.
