The sid controller on the H3 is generally identical in location, size, and
efuse offset to the a64 and the a83t. The main difference is that the H3 has
a silicon bug that sometimes causes the rootkey (at least) to be garbled
unless first read by the prctl registers.
This device is currently not in our DTS and, as of now, is not yet present
in mainline Linux DTS.
Tested on: OrangePi One
Technically supported on the later SoCs, this will only really be used to
add support for the H3 sid. The H3 has a silicon bug that manifests itself
by returning garbled rootkeys unless first read via the prctl registers.
The trick is not to destroy an md(4) device during a test. That can create
a "double-free" situation, because we also destroy md devices during test
cleanup.
MFC after: 2 weeks
ian@ pointed out that BUS_PASS_DEFAULT + $anything is bogus, given that
BUS_PASS_DEFAULT is defined as __INT_MAX. Instead, we take a page out of
imx6_usbphy's book and use BUS_PASS_DEFAULT - 1000 to achieve the desired
effect of syscon_generic attaching before if_awg and other potential
consumers, but late enough that more specialized implementations should have
no problem attaching instead.
Reported by: ian
I'm leaving readonly_test and nokey_test alone for now. In a future commit
they should be broken up into several smaller test cases and distributed
between multiple files.
Reviewed by: ngie
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D13717
It still needs to be before if_awg at least in order to be available for
other operations, but it should not be attaching before interrupt
controllers at the very least.
This should make errors involving syscon register space colliding with other
devices a little more innocent, but these conflicts should really be tracked
down and resolved. One such conflict is with the Raspberry Pi 3 local
interrupt controller, noticed by tuexen@
Reported by: tuexen
- Use `-r` for "reverse" mode and to match DragonFlyBSD.
- Move defines around to clear up logic
- use `errx` instead of `fprintf` and `exit`
PR: 35109
Submitted By: philipp.mergenthaler@stud.uni-karlsruhe.de
Submitted on: 2002-02-19
Reviewed by: kevans
After recent changes to change filesystems to use filesystem-specific
limits, LINK_MAX is no longer used in the base system. Applications
should in theory be able to cope with a lack of LINK_MAX by using
pathconf().
PR: 224628 (exp-run)
Approved by: imp, kib
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D13658
Add cpuctl(4) ioctl CPUCTL_EVAL_CPU_FEATURES which forces re-read of
cpu_features, cpu_features2, cpu_stdext_features, and
std_stdext_features2.
The intent is to allow the kernel to see the changes in the CPU
features after micocode update. Of course, the update is not atomic
across variables and not synchronized with readers. See the man page
warning as well.
Reviewed by: imp (previous version), jilles
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D13770
CIS. Coverity has tagged it as tainted. While this data is more
trusted than your average data, we still need to do some basic
validation on it. Check ioctl return value to ensure we switch memory
targets between common and attribute as well as the lseek.
CID: 1210464, 1006640, 1006868, 1007292, 1009091, 1009822, 1009824
would be filesystem type dependent, but that's difficult to accomplish
and it's unclear how the UEFI firmware will cope. Be conservative and
make boot loaders cope instead.
Sponsored by: Netflix
condition. This should prevent a double free. In addition, prevent a
leak by freeing dp each loop and when we're done.
CID: 1383577
Sponsored by: Netflix
Using the -s flag on devices is extraordinarily slow due to using fseek(3) a
little too conservatively. Address this by using fseek on character/block
devices as well, falling back to getchar(3) only if we fail to seek or we're
operating on tape drives, where fseek may succeed while not actually being
supported.
PR: 86485
Submitted by: arundel (originally; modified since then)
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D10939
The emac bindings that are landing in Linux 4.15 specify a syscon property
on the emac node that point to /soc/syscon. Use this property if it's
specified, but maintain backwards compatibility with the old method.
The older method is still used for boards that we get .dtb from u-boot, such
as pine64, that did not yet have stable emac bindings.
Tested on: Banana Pi-M3 (a83t)
Tested on: Pine64 (a64)
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D13296
This avoids re-reading a variable after it has been updated via an
atomic op. It is just a cosmetic cleanup as the read value was only
used to control a diagnostic printf that should rarely occur (if ever).
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D13768
