We had GENERIC for a while now so anyone still interested in those boards
should make sure that we can boot on them with it and with upstream DTS files.
Sponsored by: Beckhoff Automation GmbH & Co. KG
Reviewed by: br
Differential Revision: https://reviews.freebsd.org/D39088
There is nothing hdmi related in this interface, it's just a generic interface
for crt controller so rename it.
This also remove the 'hdmi' device used in arm kernel config. 'vt' now controls
if we build this interface (sc(4) isn't supported on arm).
Sponsored by: Beckhoff Automation GmbH & Co. KG
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D39120
device 'hdmi' is too generic (and will be used later in a new device) so rename
the arm TI devices to some proper name.
Sponsored by: Beckhoff Automation GmbH & Co. KG
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D39119
device 'hdmi' is too generic (and will be used later in a new device) so rename
the arm IMX devices to some proper name.
Sponsored by: Beckhoff Automation GmbH & Co. KG
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D39118
It was disconnected 5 years ago in 4573cd3914d7
("arm: allwinner: Disconnect A10/A20 HDMI driver") as it wasn't working.
Sponsored by: Beckhoff Automation GmbH & Co. KG
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D39117
All devices are in GENERIC and GENERIC is known to boot on those SoCs.
Sponsored by: Beckhoff Automation GmbH & Co. KG
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D39090
We had GENERIC for a while now so anyone still interested in those boards
should make sure that we can boot on them with it and with upstream DTS files.
Sponsored by: Beckhoff Automation GmbH & Co. KG
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D39089
We had GENERIC for a while now so anyone still interested in those boards
should make sure that we can boot on them with it and with upstream DTS files.
Sponsored by: Beckhoff Automation GmbH & Co. KG
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D39087
It reference to a non-existant dts file apalis-imx6.dts so unlikekly to compile.
Aldo IMX6 support is in GENERIC so anyone interested in this board should
make it work with GENERIC kernel (if that's not already the case).
Sponsored by: Beckhoff Automation GmbH & Co. KG
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D39086
Let the user decide if he wants to use bhyve's fwctl or qemu's fwcfg. He
can set the interface by adding a fwcfg option to bootrom:
-l bootrom,<path/to/rom>,fwcfg=bhyve
-l bootrom,<path/to/rom>,fwcfg=qemu
Reviewed by: markj
MFC after: 1 week
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D38337
Fwcfg items without a fixed index are reported by the file_dir. They
have an index of 0x20 and above. This helper simplifies the addition of
such fwcfg items. It selects a new free index, assigns it to the fwcfg
items and creates an proper entry in the file_dir.
Reviewed by: markj
MFC after: 1 week
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D38336
cpuid detection may have picked up a more specific guest type already,
and a follow-up check of smbios vendor/product may erroneously blow
away the previously detected type.
This reportedly fixes the boot under Hyper-V, which advertises an
smbios.system.product of "Virtual Machine."
PR: 270239
Reviewed by: imp, kib (both earlier version, same concept)
Fixes: 2fee87562948 ("abstract out the vm detection via smbios..")
Differential Revision: https://reviews.freebsd.org/D39140
Without this patch, a Kerberized NFSv4.1/4.2 mount must provide
a Kerberos credential for the client at mount time. This credential
is typically referred to as a "machine credential". It can be
created one of two ways:
- The user (usually root) has a valid TGT at the time the mount
is done and this becomes the machine credential.
There are two problems with this.
1 - The user doing the mount must have a valid TGT for a user
principal at mount time. As such, the mount cannot be put
in fstab(5) or similar.
2 - When the TGT expires, the mount breaks.
- The client machine has a service principal in its default keytab
file and this service principal (typically called a host-based
initiator credential) is used as the machine credential.
There are problems with this approach as well:
1 - There is a certain amount of administrative overhead creating
the service principal for the NFS client, creating a keytab
entry for this principal and then copying the keytab entry
into the client's default keytab file via some secure means.
2 - The NFS client must have a fixed, well known, DNS name, since
that FQDN is in the service principal name as the instance.
This patch uses a feature of NFSv4.1/4.2 called SP4_NONE, which
allows the state maintenance operations to be performed by any
authentication mechanism, to do these operations via AUTH_SYS
instead of RPCSEC_GSS (Kerberos). As such, neither of the above
mechanisms is needed.
It is hoped that this option will encourage adoption of Kerberized
NFS mounts using TLS, to provide a more secure NFS mount.
This new NFSv4.1/4.2 mount option, called "syskrb5" must be used
with "sec=krb5[ip]" to avoid the need for either of the above
Kerberos setups to be done by the client.
Note that all file access/modification operations still require
users on the NFS client to have a valid TGT recognized by the
NFSv4.1/4.2 server. As such, this option allows, at most, a
malicious client to do some sort of DOS attack.
Although not required, use of "tls" with this new option is
encouraged, since it provides on-the-wire encryption plus,
optionally, client identity verification via a X.509
certificate provided to the server during TLS handshake.
Alternately, "sec=krb5p" does provide on-the-wire
encryption of file data.
A mount_nfs(8) man page update will be done in a separate commit.
Discussed on: freebsd-current@
MFC after: 3 months
Move device memory to a weaker type. The new device memory type allows
the system to acknowledge a write to a device before the write has
completed. This is inline with VM_MEMATTR_DEVICE on armv6/armv7.
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D38945
To allow for debugging after changing the arm64 VM_MEMATTR_DEVICE
memory type add a new set of tunables to tell the kernel to use
non-posted memory.
This adds the following tunables:
- kern.force_nonposted: When set to non-zero the kernel will use
non-posted memory for all device allocations.
- hint.<dev>.<unit>.force_nonposted: As above, however only forces
non-posted memory on the named device.
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D38944
We only ever build a 4 level page table for the Arm SMMU. Remove the
support for a 3 level table.
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D38949
These are SMMU (and MALI GPU) specific. Give them a SMMU specific name.
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D38948
The TCP stacks have long accessed t_logstate directly, but in order to do tracepoints and the new bbpoints
we need to move to using the new inline functions. This adds them and moves rack to now use
the tcp_tracepoints.
Reviewed by: tuexen, gallatin
Sponsored by: Netflix Inc
Differential Revision: https://reviews.freebsd.org/D38831
This release fixes a number of security bugs and has minor new
features and bug fixes. Security fixes, from the release notes
(https://www.openssh.com/txt/release-9.3):
This release contains fixes for a security problem and a memory
safety problem. The memory safety problem is not believed to be
exploitable, but we report most network-reachable memory faults as
security bugs.
* ssh-add(1): when adding smartcard keys to ssh-agent(1) with the
per-hop destination constraints (ssh-add -h ...) added in OpenSSH
8.9, a logic error prevented the constraints from being
communicated to the agent. This resulted in the keys being added
without constraints. The common cases of non-smartcard keys and
keys without destination constraints are unaffected. This problem
was reported by Luci Stanescu.
* ssh(1): Portable OpenSSH provides an implementation of the
getrrsetbyname(3) function if the standard library does not
provide it, for use by the VerifyHostKeyDNS feature. A
specifically crafted DNS response could cause this function to
perform an out-of-bounds read of adjacent stack data, but this
condition does not appear to be exploitable beyond denial-of-
service to the ssh(1) client.
The getrrsetbyname(3) replacement is only included if the system's
standard library lacks this function and portable OpenSSH was not
compiled with the ldns library (--with-ldns). getrrsetbyname(3) is
only invoked if using VerifyHostKeyDNS to fetch SSHFP records. This
problem was found by the Coverity static analyzer.
Sponsored by: The FreeBSD Foundation
These can be returned from the PSCI AFFINITY_INFO call. This is not
marked as optional so bhyve will need to implement it & can use these
macros.
Sponsored by: Arm Ltd
Wrap parts of psci.h that aren't usable by userspace in _KERNEL checks.
This allows it to be used to implement PSCI and SMCCC by bhyve in
userspace.
Sponsored by: Arm Ltd
Sponsored by: Innovate UK
Sponsored by: The FreeBSD Foundation
We've observed a panic after pf_refragment6() with link-local addresses,
because pf_refragment6() calls ip6_forward() even for a simple output
case.
That results in us entering ip6_forward() with an mbuf with a NULL
m->m_pkthdr.rcvif, which can cause a NULL deref (but seemingly not for
GUAs.
Test sending fragmented link-local packets to pf.
MFC after: 3 days
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D39063
Link-local traffic needs to have a scope embedded before it's passed on
to ip6_output(). Do so in pf_refragment6(), because when we end up here
in the output path we may have passed through ip6_output() already
(before being reassembled), where the scope would have been removed.
Re-embed the scope so that link-local traffic is sent correctly.
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D39062
Re-introduce PFIL_FWD, because pf's pf_refragment6() needs to know if
we're ip6_forward()-ing or ip6_output()-ing.
ip6_forward() relies on m->m_pkthdr.rcvif, at least for link-local
traffic (for in6_get_unicast_scopeid()). rcvif is not set for locally
generated traffic (e.g. from icmp6_reflect()), so we need to call the
correct output function.
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revisi: https://reviews.freebsd.org/D39061
When receiving a cookie, the receiver does not know whether the
peer retransmitted the COOKIE-ECHO chunk or not. Therefore, don't
do an RTT measurement. It might be much too long.
To overcome this limitation, one could do at least two things:
1. Bundle the INIT-ACK chunk with a HEARTBEAT chunk for doing the
RTT measurement. But this is not allowed.
2. Add a flag to the COOKIE-ECHO chunk, which indicates that it
is the initial transmission, and not a retransmission. But
this requires an RFC.
MFC after: 1 week
Enforce consistency between announcing 0-cksum support and actually
using it in the association. The value from the inp when the
INIT ACK is sent must be used, not the one from the inp when the
cookie is received.
Summary:
* add snl_send_message() as a convenient send wrapper
* add signed integer parsers
* add snl_read_reply_code() to simplify operation result checks
* add snl_read_reply_multi() to simplify reading multipart messages
* add snl_create_genl_msg_request()
* add snl_get_genl_family() to simplify family name->id resolution
* add tests for some of the functionality
Reviewed by: kp
Differential Revision: https://reviews.freebsd.org/D39092
MFC after: 2 weeks
