(resets, regulators, clocks) are not available.
Rely on a system initialization done by a bootloader in that cases.
This fixes operation on Terasic DE10-Pro (an Intel Stratix 10
development kit).
Sponsored by: DARPA, AFRL
Refactor nvdimm_spa_memattr() routine and callers to just save the value at
initialization and use the value directly. The reference value from NFIT,
MemoryMapping, is read only once, so the associated memattr could never
change.
No functional change.
Sponsored by: Dell EMC Isilon
starting at the max. domain, and then work down. Then existing FreeBSD
drivers will attach. Interrupt routing from the VMD MSI-X to the NVME
drive is not well known, so any interrupt is sent to all children that
register.
VROC used Intel meta data so graid(8) works with it. However, graid(8)
supports RAID 0,1,10 for read and write. I have some early code to
support writes with RAID 5. Note that RAID 5 can have life issues
with SSDs since it can cause write amplification from updating the parity
data.
Hot plug support needs a change to skip the following check to work:
if (pcib_request_feature(dev, PCI_FEATURE_HP) != 0) {
in sys/dev/pci/pci_pci.c.
Looked at by: imp, rpokala, bcr
Differential Revision: https://reviews.freebsd.org/D21383
This ensures the clip task won't race with t4_destroy_clip_table.
While here, make some mutex destroys unconditional since attach always
initializes them.
Reviewed by: np
MFC after: 1 week
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D21952
If the bootloader enabled DMA we need to fully reset the DMA controller
otherwise we might have some stale data in it that provoke weird
behavior.
MFC after: 1 week
This adds a TOE hook to allocate a KTLS session. It also recognizes
TLS mbufs in the socket buffer and sends those to the NIC using a TLS
work request to encrypt the record before segmenting it.
TOE TLS support must be enabled via the dev.t6nex.<N>.tls sysctl in
addition to enabling KTLS.
Reviewed by: np, gallatin
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D21891
The PCI block in the adapter requires this field to be set to a valid
queue ID. It is not clear why it did not fail on all machines, but
the effect was that crypto operations reading input data via DMA
failed with an internal PCI read error on machines with 128G or more
of RAM.
Reported by: gallatin
Reviewed by: np
MFC after: 3 days
Sponsored by: Chelsio Communications
As noted by the commit message, callouts are now persistant
and should not be in the auto-zero section of the RQ's and SQ's.
This fixes an assert when using the TX completion event
factor feature with mlx5en(4).
Found by: gallatin@
MFC after: 3 days
Sponsored by: Mellanox Technologies
In case the implementation ever changes from using a chain of next pointers,
then changing the macro definition will be necessary, but changing all the
files that iterate over vm_map entries will not.
Drop a counter in vm_object.c that would have an effect only if the
vm_map entry count was wrong.
Discussed with: alc
Reviewed by: markj
Tested by: pho (earlier version)
Differential Revision: https://reviews.freebsd.org/D21882
When epoch(9) was introduced to network stack, it was basically
dropped in place of existing locking, which was mutexes and
rwlocks. For the sake of performance mutex covered areas were
as small as possible, so became epoch covered areas.
However, epoch doesn't introduce any contention, it just delays
memory reclaim. So, there is no point to minimise epoch covered
areas in sense of performance. Meanwhile entering/exiting epoch
also has non-zero CPU usage, so doing this less often is a win.
Not the least is also code maintainability. In the new paradigm
we can assume that at any stage of processing a packet, we are
inside network epoch. This makes coding both input and output
path way easier.
On output path we already enter epoch quite early - in the
ip_output(), in the ip6_output().
This patch does the same for the input path. All ISR processing,
network related callouts, other ways of packet injection to the
network stack shall be performed in net_epoch. Any leaf function
that walks network configuration now asserts epoch.
Tricky part is configuration code paths - ioctls, sysctls. They
also call into leaf functions, so some need to be changed.
This patch would introduce more epoch recursions (see EPOCH_TRACE)
than we had before. They will be cleaned up separately, as several
of them aren't trivial. Note, that unlike a lock recursion the
epoch recursion is safe and just wastes a bit of resources.
Reviewed by: gallatin, hselasky, cy, adrian, kristof
Differential Revision: https://reviews.freebsd.org/D19111
nvdimm_e820 is a newbus pseudo driver that looks for "legacy" e820 PRAM
spans and creates ordinary-looking SPA devfs nodes for them
(/dev/nvdimm_spaN).
As these legacy regions lack real NFIT SPA regions and namespace
definitions, they must be administratively sliced up externally using
device.hints. This is similar in purpose to the Linux memmap= mechanism.
It is assumed that systems with working NFIT tables will not have any use
for this driver, and that that will be the prevailing style going forward,
so if there are no explicit hints provided, this driver does not
automatically create any devices.
Reviewed by: kib (previous version)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D21885
Create an attachment file for the existing ACPI attachment, and create a
new FDT attachment for the generic-ehci driver.
Submitted by: andrew (Original version)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D19389
Regression introduced in r343629 when malloc result was renamed from spa to
spa_mapping and the 'spa' name was instead used to iterate a table, but the
free() target was not updated.
Reviewed by: kib, scottph
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D21871
The PRM suggests random 0 - 10ms to prevent multiple waiters on the same
interval in order to avoid starvation.
Submitted by: slavash@
MFC after: 3 days
Sponsored by: Mellanox Technologies
Before attempting to initialize the command interface we must wait till
the fw_initializing bit is clear.
If we fail to meet this condition the hardware will drop our
configuration, specifically the descriptors page address. This scenario
can happen when the firmware is still executing an FLR flow and did not
finish yet so the driver needs to wait for that to finish.
Linux commits:
6c780a0267b8
b8a92577f4be.
MFC after: 3 days
Sponsored by: Mellanox Technologies
in mlx5en(4) after r348254.
The unlimited send tags are shared amount multiple connections and are
not allocated per send tag allocation request. Only increment the refcount.
MFC after: 3 days
Sponsored by: Mellanox Technologies
It may happen during link down that the running state may be observed
non-zero in the transmit routine, right before the running state is
cleared. This may end up using a destroyed mutex.
Make all channel mutexes and callouts persistant.
Preserve receive and send queue statistics during link toggle.
MFC after: 3 days
Sponsored by: Mellanox Technologies
in mlx5core. The EEPROM information is not only a property of the
mlx5en(4) driver.
Submitted by: slavash@
MFC after: 3 days
Sponsored by: Mellanox Technologies
The following sysctls are added:
dev.mce.N.conf.qos.cable_length
dev.mce.N.conf.qos.buffers_size
dev.mce.N.conf.qos.buffers_prio
Submitted by: kib@
MFC after: 3 days
Sponsored by: Mellanox Technologies
All prints in mlx5core should use on of the macros:
mlx5_core_err/dbg/warn
Submitted by: slavash@
MFC after: 3 days
Sponsored by: Mellanox Technologies
In case of health counter fails to increment it indicates a bad device health.
In case when the syndrome indicated by firmware is 0x0, this indicates that
firmware is unable to respond to initialization segment reads.
Add proper print in this case.
Submitted by: slavash@
MFC after: 3 days
Sponsored by: Mellanox Technologies
