In my understanding this is only needed to workaround lost interrupts.
I was thinking to remove it completely, but the comment about edge-
triggered interrupt may be true and needs deeper investigation. ~1Hz
should be often enough to handle the supposedly rare loss cases, but
rare enough to not appear in top. Add sysctl hw.atkbd.hz to tune it.
MFC after: 1 month
The starting address passed to mprotect was wrong, so in the case where
the last page containing the table is not the last page of the BAR, the
wrong region would be unmapped.
Reported by: Andy Fiddaman <andy@omniosce.org>
Reviewed by: jhb
Fixes: 7fa233534736 ("bhyve: Map the MSI-X table unconditionally for passthrough")
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33739
The PBA and MSI-X table can reside in different BARs.
Reported by: Andy Fiddaman <andy@omniosce.org>
Reviewed by: jhb
Fixes: 7fa233534736 ("bhyve: Map the MSI-X table unconditionally for passthrough")
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33739
Advertise rc.conf method as the right way to enable it, mention
file system mapping... and change some wording.
Reviewed By: emaste, debdrup, Pau Amma
Sponsored By: EPSRC
Differential Revision: https://reviews.freebsd.org/D33720
We need to include bsd.endian.mk from bsd.compiler.mk to enable
compressed symbols only on FreeBSD little endian targets.
However, since we include bsd.compiler.mk from Makefile.inc1 and from
the build tools makefiles, it has to work on Linux and osx. Make the
error condition only when we're building natively (so that we are
forced to add a new architecture to the list).
Otherwise, define bogus, poisoned values and leave TARGET_ENDIANNESS
undefined. Since we don't actually use TARGET_ENDIANNESS for anything
in the cross building phase, these values are a failsafe agianst their
use. The one place in the build phase that detects endian is
appropriately protected.
Sponsored by: Netflix
Reviewed by: jrtc27
Differential Revision: https://reviews.freebsd.org/D33742
The saf1761 OTG support was only for mips targets (BERI?). Retire it.
Sponsored by: Netflix
Reviewed by: brooks
Differential Revision: https://reviews.freebsd.org/D33706
This matches icl_conn_task_setup() which passes the PDU and avoids the
need for a layering violation in cxgbei to fetch the request PDU from
the ctl_io.
Reviewed by: mav
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D33746
Previously the driver duplicated code from cryptosoft.c to handle
certain edge case AES-CCM and AES-GCM requests. However, this
approach has a few downsides:
1) It only uses "plain" software and not accelerated software since it
uses enc_xform directly.
2) It performs the operation synchronously even though the caller
believes it is invoking an async driver. This was fine for the
original use case of requests with only AAD and no payload that
execute quickly, but is a bit more disingenuous for large requests
which fall back due to exceeding the size of a firmware work
request (e.g. due to large scatter/gather lists).
3) It has required several updates since ccr(4) was added to the tree.
Instead, allocate a software session for AES-CCM and AES-GCM sessions
and dispatch a cloned request asynchronusly to the software session.
Reviewed by: markj
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D33608
This function clones an existing crypto request, but associates the
new request with a specified session. The intended use case is for
drivers to be able to fall back to software by cloning a request and
dispatch it to an internally allocated software session.
Reviewed by: markj
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D33607
It turns out that we still need xlocal.h protection for when we're
cross building on Linux. Linux doesn't have this file, but os/x
does. Before, we'd assume we didn't have it, like old FreeBSD, when
cross compiling. After the latest update, all that code was removed so
cross compiling needs to be handled separaetly. Do so by defining
HAVE_XLOCALE_H only when we're not building on linux. This allows us
to build the mkmagic build tool needed to build file(1).
Sponsored by: Netflix
Reviewed by: jrtc27
Differential Revision: https://reviews.freebsd.org/D33741
The original logic was to check if there's no filter and the address is
misaligned relative to the requirements. The refactoring in
c606ab59e7f9423f7027320e9a4514c7db39658d missed this, and instead caused
it to return failure if the address *is* properly aligned.
Make neta use frequency obtained from clock, instead of
hardcoded one. Use default frequency in case of clock
device failure. Remove unnecessary function calls
to obtain frequency and use cached one instead.
Reviewed by: manu
Obtained from: Semihalf
Differential revision: https://reviews.freebsd.org/D32336
Add driver for Marvell, Armada-37xx peripheral clock.
Register clocks for various peripheral devices in
north bridge or south bridge domain. Dump clock's
domain while verbose boot.
Reviewed by:
Obtained from: Semihalf
Differential revision: https://reviews.freebsd.org/D32294
Driver for tbg clocks. Read reference frequency from parent
and modify it depending on parameters read from register.
Reviewed by: manu
Obtained from: Semihalf
Differential revision: https://reviews.freebsd.org/D32293
Driver registers new clock device. Clock frequency is set depending
on tenth bit's value obtained from syscon register. Full information
about the clock is dumped if bootverbose is enabled.
Driver was tested on EspressoBin.
Reviewed by: manu
Obtained from: Semihalf
Differential revision: https://reviews.freebsd.org/D32292
The work to ANSIfy and adjust returns to style(9) resulted in a mismerge
of a stash when ipfilter was moved from contrib to sbin. An older file
replaced WIP at the time, resulting in a regression.
The majority of this work was done in 2018 saved as git stashes within
a git-svn tree and migrated to the git tree. The regression occurred
when the various stashes were sequentially merged to create individual
commits, following the ipfilter move to netpfil and sbin.
Reported by: jrtc27
Fixes: 2582ae5740181e0d2bab10003d66ae91c9b56329
Pointy hat to: cy
MFC after: 1 month
SDT probe frb_natv4in is only available when an error is encountered.
Make it also available when no error is encountered, i.e. NATed and
not translated.
MFC after: 1 week
