libstand is built in three places (lib/libstand, sys/boot/libstand32,
and sys/boot/userboot/libstand). Reduce Makefile duplication by
.including libstand/Makefile from sys/boot/libstand32/Makefile.
sys/boot/userboot/libstand/Makefile will be addressed later, as it
contains additional differences yet to be handled.
This change also switches libstand32 to use the new uuid_from_string
and uuid_to_string, which was not included in r292473.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D4747
Newer Book-E cores (e500mc, e5500, e6500) do not support the WE bit in the MSR,
and instead delegate CPU idling to the SoC.
Perhaps in the future the QORIQ_DPAA option for the mpc85xx platform will become
a subclass, which will eliminate most of the #ifdef's.
for all geom classes, e.g. geom_uzip(4)
- These tests require root. Skip all of the tests if they're run as non-root
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
we're assuming hz=1000 and not gracefully handling when it isn't.
The math involved will return 0 for hz < 1000, which it is on some
platforms and on DragonflyBSD.
This doesn't fix it, it:
* converts one manual use over to use the macro, and
* comments where it needs some thought/fixing.
I'll think about this a bit more before fixing it.
Submitted by: imre@vdsz.com
Fix a clang 3.8.0 warning in pflogd.c:
contrib/pf/pflogd/pflogd.c:769:8: error: logical not is only applied to the left hand side of this comparison [-Werror,-Wlogical-not-parentheses]
if (!if_exists(interface) == -1) {
^ ~~
The if_exists() function does not return -1, and even if it did, it
would not be the correct way to check. Just ditch the == -1 instead.
Obtained from: OpenBSD's pflogd.c 1.49
MFC after: 3 days
For determining the compiler version, quote the string to be echo'd,
otherwise the command might fail. This is because clang -v now results
in the following:
FreeBSD clang version 3.8.0 (trunk 256633) (based on LLVM 3.8.0svn)
The second "3.8.8svn)" string tripped up the shell command.
MFC after: 3 days
contrib/pf/pflogd/pflogd.c:769:8: error: logical not is only applied to the left hand side of this comparison [-Werror,-Wlogical-not-parentheses]
if (!if_exists(interface) == -1) {
^ ~~
The if_exists() function does not return -1, and even if it did, it
would not be the correct way to check. Just ditch the == -1 instead.
Obtained from: OpenBSD's pflogd.c 1.49
MFC after: 3 days
This is a port from openbsd. It's incomplete and unstable, but it's better
than nothing. I have no plans to MFC this until it's complete and stable.
Submitted by: kevlo
otherwise the command might fail. This is because clang -v now results
in the following:
FreeBSD clang version 3.8.0 (trunk 256633) (based on LLVM 3.8.0svn)
The second "3.8.8svn)" string tripped up the shell command.
With the new expand.c code, the intermediate representation passed to the
pathname generation code only contains CTLESC, not CTLQUOTEMARK.
CTLQUOTEMARK now only occurs in the text of NARG nodes (output of the
parser).
If the system was booted with ZFS, a new menu item (#7) appears
It contains an autogenerated list of ZFS Boot Environments
This allows the user to switch to an alternate root file system
Use Cases:
- Revert a failed upgrade
- Concurrently run different versions of FreeBSD with common home directory
- Easier integration with the sysadmin/beadm utility
Requested by: many
Reviewed by: dteske
MFC after: 10 days
Relnotes: yes
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D3167
Thinking this through, and looking at process_assignment, I believe
moving the code would be wrong considering that set_conf_files is
called in one condition while set_nextboot_conf is guarded by a
different condition of having nextboot_enable="YES". So these must
stay separated and not combined.
MFC after: 1 week
This avoids the need to add and remove CTLESC bytes if pathname generation
will not be performed (set -f).
Side effect: the order of operations is slightly different: pathname
generation in ${$+* $(CMD)} will not see filesystem changes from CMD.
relocation fixups unsupported by the self_reloc() code, and don't optimize
memcpy/memset using floating point registers, because in a standalone
environment nothing has initialized the fpu hardware.
This simplifies the code and should be faster in some cases.
Side effect: the order of operations is different so that the value of IFS
used when IFS is modified during expansion (${IFS:=...}, ${IFS=...} or
$((...IFS=...))) may be different. Note that this order is highly unportable
between shells.
- Declare some static functions in linux_compat.c instead if inside
various header files.
- Prefix FreeBSD local functions in the LinuxKPI with "linux_" to
avoid symbol name conflicts in the future and to make debugging
easier.
- Make the "struct kobj_ktype" declaractions constant to shave off a
few bytes from the data segment.
MFC after: 1 week
Sponsored by: Mellanox Technologies
Add if_requestencap() interface method which is capable of calculating
various link headers for given interface. Right now there is support
for INET/INET6/ARP llheader calculation (IFENCAP_LL type request).
Other types are planned to support more complex calculation
(L2 multipath lagg nexthops, tunnel encap nexthops, etc..).
Reshape 'struct route' to be able to pass additional data (with is length)
to prepend to mbuf.
These two changes permits routing code to pass pre-calculated nexthop data
(like L2 header for route w/gateway) down to the stack eliminating the
need for other lookups. It also brings us closer to more complex scenarios
like transparently handling MPLS nexthops and tunnel interfaces.
Last, but not least, it removes layering violation introduced by flowtable
code (ro_lle) and simplifies handling of existing if_output consumers.
ARP/ND changes:
Make arp/ndp stack pre-calculate link header upon installing/updating lle
record. Interface link address change are handled by re-calculating
headers for all lles based on if_lladdr event. After these changes,
arpresolve()/nd6_resolve() returns full pre-calculated header for
supported interfaces thus simplifying if_output().
Move these lookups to separate ether_resolve_addr() function which ether
returs error or fully-prepared link header. Add <arp|nd6_>resolve_addr()
compat versions to return link addresses instead of pre-calculated data.
BPF changes:
Raw bpf writes occupied _two_ cases: AF_UNSPEC and pseudo_AF_HDRCMPLT.
Despite the naming, both of there have ther header "complete". The only
difference is that interface source mac has to be filled by OS for
AF_UNSPEC (controlled via BIOCGHDRCMPLT). This logic has to stay inside
BPF and not pollute if_output() routines. Convert BPF to pass prepend data
via new 'struct route' mechanism. Note that it does not change
non-optimized if_output(): ro_prepend handling is purely optional.
Side note: hackish pseudo_AF_HDRCMPLT is supported for ethernet and FDDI.
It is not needed for ethernet anymore. The only remaining FDDI user is
dev/pdq mostly untouched since 2007. FDDI support was eliminated from
OpenBSD in 2013 (sys/net/if_fddisubr.c rev 1.65).
Flowtable changes:
Flowtable violates layering by saving (and not correctly managing)
rtes/lles. Instead of passing lle pointer, pass pointer to pre-calculated
header data from that lle.
Differential Revision: https://reviews.freebsd.org/D4102
implemented to lower the compiler warnings.
It fix the case of unused-but-set-variable spotted by gcc4.9.
Reviewed by: ngie, ae
Approved by: bapt (mentor)
Differential Revision: https://reviews.freebsd.org/D4720
entries. This fixes the segfaults in arm userland code compiled with
-march= or -mcpu= values that allow the compiler to generate movw/movt
sequences to load 32-bit constants.
Keep xform.c as a meta-file including the broken out bits
existing code that includes xform.c continues to work as normal
Individual algorithms can now be reused elsewhere, including outside
of the kernel
Reviewed by: bapt (previous version), gnn, delphij
Approved by: secteam
MFC after: 1 week
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D4674
