space range per channel, but rather the unshifted range. The
shifting depends on the bus. The hardcoded shift was specific
to the SBus on sparc64. The shifted range is now determined at
run-time. This fixes the mac-io attachment.
of incorrect and machine-dependent integer math. Now we can encrypt a file
on an i386 and decrypt it on an amd64, and vice versa.
Submitted by: Andrew Heybey < ath at niksun dot com >
Such an address can be used directly in padlock's AES.
This improves speed of geli(8) significantly:
# sysctl kern.geom.zero.clear=0
# geli onetime -s 4096 gzero
# dd if=/dev/gzero.eli of=/dev/null bs=1m count=1000
Before: 113MB/s
After: 203MB/s
BTW. If sector size is set to 128kB, I can read at 276MB/s :)
skip the actual type 1 length (6 bytes). With this change, it is now possible
to correctly spot the VAT partition map in certain discs.
Submitted by: Pedro Martelletto <pedro@ambientworks.net>
wait(), waitpid() and usleep(), they are internal versions and
should not be cancellation points.
2. Make wait3() as a cancellation point.
3. Move raise() and pause() into file thr_sig.c.
4. Add functions _sigsuspend, _sigwait, _sigtimedwait and _sigwaitinfo,
remove SIGCANCEL bit in wait-set for those functions, the signal is
used internally to implement thread cancellation.
Prevent casual modification by requiring hw.acpi.thermal.user_override to
be set first. Fix printing of negative temperatures in the K->C conversion.
Document the remaining thermal sysctls.
MFC after: 3 days
desired role configuration instead of existing role. This gets
us out of the mess where we configured a role of NONE (or were
LAN only, for example), but didn't continue to attach the CAM
module (because we had neither initiator nor target role
set). Unfortunately, the code that rewrites NVRAM to match
actual to desired role only works if the CAM module attaches.
MFC after: 2 weeks
controller ported from NetBSD. It supports the following Gigabit
Ethernet adapters.
o Antares Microsystems Gigabit Ethernet
o ASUS NX1101 Gigabit Ethernet
o D-Link DL-4000 Gigabit Ethernet
o IC Plus IP1000A Gigabit Ethernet
o Sundance ST-2021 Gigabit Ethernet
o Sundance ST-2023 Gigabit Ethernet
o Sundance TC9021 Gigabit Ethernet
o Tamarack TC9021 Gigabit Ethernet
The IP1000A Gigabit Ethernet is also found on some motherboards
(LOM) from ABIT.
Unlike NetBSD stge(4) it does not require promiscuous mode operation
to revice packet and it supports all hardware features(TCP/UDP/IP
checksum offload, VLAN tag stripping/insertion features and JUMBO
frame) and polling(4).
Due to lack of hardware, hardwares that have TBI trantransceivers
were not tested at all.
Special thanks to wpaul who provided valauble datasheet for the
controller and helped to debug jumbo frame related issues. Whitout
his datasheet I would have spent many hours to debug this chip.
Tested on: i386, sparc64
