According to the open firmware standard, finddevice call has to return
a phandle with value of -1 in case of error.
This commit is to:
- Fix the FDT implementation of this interface (ofw_fdt_finddevice) to
return (phandle_t)-1 in case of error, instead of 0 as it does now.
- Fix up the callers of OF_finddevice() to compare the return value with
-1 instead of 0 to check for errors.
- Since phandle_t is unsigned, the return value of OF_finddevice should
be checked with '== -1' rather than '<= 0' or '> 0', fix up these cases
as well.
Reported by: nwhitehorn
Reviewed by: raj
Approved by: raj, nwhitehorn
to known AHCI-capable chips (AMD/NVIDIA), configured for legacy emulation.
Enabled by default to get additional performance and functionality of AHCI
when it can't be enabled by BIOS. Can be disabled to honor BIOS settings if
needed for some reason.
MFC after: 1 month
any installer-provided configuration files have been copied. This allows
users to edit their fstab, if desired, and to see what the installer has
placed in rc.conf.
Requested by: phk
MFC after: 1 day
vs. the comment documented "If we are working with a privileged socket,
then take only one attempt". Make the code match.
Furthermore, critical privileged applications that [over] log a vast amount
can look like a DoS to this code. Given it's unlikely the single reattempted
send() will succeeded, avoid usurping the scheduler in a library API for a
single non-critical facility in critical applications.
Obtained from: Juniper Networks
Discussed with: glebius
giving them a very brief description of the trade-offs. Whether the
user opts in or out add an entry to what will become /etc/rc.conf
explaining what dumpdev is and how to turn on/off crash dumps. The folks
who handle interacting with users submitting PRs have asked for this.
Reviewed by: nwhitehorn
MFC after: 1 day
NFS server and reuse it for writes as well to allow writes to the backing
store to be clustered.
- Use a prime number for the size of the heuristic table (1017 is not
prime).
- Move the logic to locate a heuristic entry from the table and compute
the sequential count out of VOP_READ() and into a separate routine.
- Use the logic from sequential_heuristic() in vfs_vnops.c to update the
seqcount when a sequential access is performed rather than just
increasing seqcount by 1. This lets the clustering count ramp up
faster.
- Allow for some reordering of RPCs and if it is detected leave the current
seqcount as-is rather than dropping back to a seqcount of 1. Also,
when out of order access is encountered, cut seqcount in half rather than
dropping it all the way back to 1 to further aid with reordering.
- Fix the new NFS server to properly update the next offset after a
successful VOP_READ() so that the readahead actually works.
Some of these changes came from an earlier patch by Bjorn Gronwall that was
forwarded to me by bde@.
Discussed with: bde, rmacklem, fs@
Submitted by: Bjorn Gronwall (1, 4)
MFC after: 2 weeks
-1. But, because ino_t is unsigned, this case was not covered by the
test ino > 0 in pipeclose(), leading to the free_unr(-1). Fix it by
explicitely comparing with 0 and -1. [1]
Do no access freed memory, the inode number was cached to prevent access
to cpipe after it possibly was freed, but I failed to commit the right
patch.
Noted by: gianni [1]
Pointy hat to: kib
MFC after: 3 days
to enable and configure the functionality.
Committed on behalf of Julien Ridoux and Darryl Veitch from the University of
Melbourne, Australia, as part of the FreeBSD Foundation funded "Feed-Forward
Clock Synchronization Algorithms" project.
For more information, see http://www.synclab.org/radclock/
Discussed with: Julien Ridoux (jridoux at unimelb edu au)
Submitted by: Julien Ridoux (jridoux at unimelb edu au)
introduced when feed-forward clock support is enabled in the kernel:
- Rename the "choice" variable to "available".
- Streamline the implementation of the "active" variable's sysctl handler
function.
- Create a kern.sysclock sysctl node for general sysclock related configuration
options. Place the "available" and "active" variables under this node.
- Create a kern.sysclock.ffclock sysctl node for feed-forward clock specific
configuration options. Place the "version" and "ffcounter_bypass" variables
under this node.
- Tweak some of the description strings.
Discussed with: Julien Ridoux (jridoux at unimelb edu au)
defined based on WITH/WITHOUT_CTF settings, default is WITHOUT_CTF,
NO_CTF overrides WITH_CTF (used by Makefile.inc1)
- CTFCONVERT_CMD/NORMAL_CTFCONVERT are now defined to empty string
if make(1) can handle empty commands
to Compat_RunCommand() being called with `cmd' that is not on the node->commands
list
- Make ellipsis ("..." command) handling consistent: check for "..." command
in job make after variables expansion to match compat make behavior
- Fix empty command handling (after variables expansion and @+- modifiers
are processed): now empty commands are ignored in compat make and are not
printed in job make case
- Bump MAKE_VERSION to 5-2011-11-30-0
- plus: execute "+command" when run with -jX -n
- ellipsis: ellipsis ("...") from variable
- empty: empty command (from variable)
Currently make(1) fails all three tests:
- plus: segmentation fault due to incorrect command list handling
- ellipsis: works in compat mode but fails in job (-jX) mode
- empty:
- compat mode: prints error message
- job mode: works but prints empty string
- CTFCONVERT_CMD=... is a hack (should be defined to empty string instead):
make(1) should be taught to ignore empty commands silently in compat mode
(as it does in !compat mode, GNU make also silently ignores empty commands)
and to skip printing empty commands in !compat mode
- config(8) should generate ${NORMAL_CTFCONVERT} invocation without '@':
this will allow to simplify kern.pre.mk even more and lessen the number
of shell invocations during kernel build when CTF is turned off
- WITH_CTF can now be converted to usual MK_CTF=yes/no infrastructure
Pointy hat to: fjoe [1]
Since the address of vm_page lock mutex depends on the kernel options,
it is easy for module to get out of sync with the kernel.
No vm_page_lockptr() accessor is provided for modules. It can be added
later if needed, unless proper KPI is developed to serve the needs.
Reviewed by: attilio, alc
MFC after: 3 weeks
Committed on behalf of Julien Ridoux and Darryl Veitch from the University of
Melbourne, Australia, as part of the FreeBSD Foundation funded "Feed-Forward
Clock Synchronization Algorithms" project.
For more information, see http://www.synclab.org/radclock/
Discussed with: Julien Ridoux (jridoux at unimelb edu au)
Submitted by: Julien Ridoux (jridoux at unimelb edu au)
reimplementing the [get]{bin,nano,micro}[up]time() wrapper functions in terms of
the new "fromclock" API instead.
Committed on behalf of Julien Ridoux and Darryl Veitch from the University of
Melbourne, Australia, as part of the FreeBSD Foundation funded "Feed-Forward
Clock Synchronization Algorithms" project.
For more information, see http://www.synclab.org/radclock/
Discussed with: Julien Ridoux (jridoux at unimelb edu au)
Submitted by: Julien Ridoux (jridoux at unimelb edu au)
This is required to override knobs (e.g. WITH_PROFILE) during buildworld
stages in Makefile.inc1 (otherwise the build is stopped due to both WITH_FOO
and WITHOUT_FOO defined).
items. While parsing the arrays input, it's possible that we reach the
error path before initializing the 'arrays' pointer, which in turn leads
to a NULL deference.
Submitted by: Garrett Cooper
MFC after: 1 week
select which system clock to obtain time from, independent of the current
default system clock. In the brave new multi sysclock world, both feedback and
feed-forward system clocks can be maintained and used concurrently, so this API
provides a minimalist first step for interested consumers to exercise control
over their choice of system clock.
Committed on behalf of Julien Ridoux and Darryl Veitch from the University of
Melbourne, Australia, as part of the FreeBSD Foundation funded "Feed-Forward
Clock Synchronization Algorithms" project.
For more information, see http://www.synclab.org/radclock/
Discussed with: Julien Ridoux (jridoux at unimelb edu au)
Submitted by: Julien Ridoux (jridoux at unimelb edu au)
