kern_vm_munmap(), and kern_vm_madvise(), and use them in various compats
instead of their sys_*() counterparts.
Reviewed by: ed, dchagin, kib
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D9378
reasons. First is rerooting into USB-mounted device that happens
to be not yet enumerated. The second is when mounting with (non-root)
filesystem on USB device on a hub that's enumerated later than the root
mount: the rc scripts explicitly mount for the root mount holds to be
released, but each USB bus takes the hold asynchronously, and if that
happens after root mount, it would just get ignored.
Reviewed by: marcel
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D9388
for mount hold release if the root device already exists. So, unless your
rootdev is not on USB - ie in the usual case - the root mount won't wait
for USB. However, the old behaviour was sometimes used as "wait until USB
is fully enumerated", and r290196 broke that.
This commit adds vfs.root_mount_always_wait tunable, to force the kernel
to always wait for root mount holds, even if the root is already there.
Reviewed by: kib
MFC after: 2 weeks
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D9387
The alloca() does give us pointer and we have no practical way to check if the
area is actually available, resulting in corruption in corner cases.
Unfortunately we do not have too many options right now, but to use one page.
Reviewed by: allanjude
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D9455
This fix is implementing partition based boundary check for
disk IO and updates disk mediasize (if needed), based on information
from partition table.
As it appeared, the signed int based approach still has corner cases,
and the wrapover based behavior is non-standard.
The idea for this fix is based on two assumptions:
The bug about media size is hitting large (2+TB) disks, lesser disks
hopefully, are not affected.
Large disks are using GPT (which does include information about disk size).
Since our concern is about boot support and boot disks are partitioned,
implementing partition boundaries based IO verification should make the
media size issues mostly disappear.
However, for large disk case, we do have the disk size available from GPT table.
If non-GPT cases will appear, we still can make approximate calculation about
disk size based on defined partition(s), however, this is not the objective
of this patch, and can be added later if there is any need.
This patch does implement disk media size adjustment (if needed) in bd_open(),
and boundary check in bd_realstrategy().
Reviewed by: allanjude
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D8595
On arm64 use atomics. Then, both arm and arm64 do not need a critical
section around update. Replace all cpus loop by CPU_FOREACH().
This brings arm and arm64 counter(9) implementation closer to current
amd64, but being more RISC-y, arm* version cannot avoid atomics.
Reported by: Alexandre Martins <alexandre.martins@stormshield.eu>
Reviewed by: andrew
Tested by: Alexandre Martins, andrew
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
identify_arm_cpu() in sys/arm/arm/identcpu-v4.c incorrectly uses a
u_int8_t variable to store the result of cpu_get_control().
It should really use a u_int variable, the same way as done for cpu_ident()
in the same function, as both cpuid and control registers are 32-bit..
This issue causes users of identcpu-v4 to incorrectly report things such as
icache status (bit 12 in cpu control register) and basically anything
defined in bits above bit 7 :-)
Reviewed by: manu
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D9460
controller drivers handle either MSI/MSI-X interrupts, or regular
interrupts, as such enforce this in the interrupt handling framework.
If a later driver was to handle both it would need to create one of each.
This will allow future changes to allow the xref space to overlap, but
refer to different drivers.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
X-Differential Revision: https://reviews.freebsd.org/D8616
When a relevant lockstat probe is enabled the fallback primitive is called with
a constant signifying a free lock. This works fine for typical cases but breaks
with recursion, since it checks if the passed value is that of the executing
thread.
Read the value if necessary.
Rewrite EFI part device interface to present disk devices in more
user friendly way.
We keep list of three types of devices: floppy, cd and disk, the
visible names: fdX: cdX: and diskX:
Use common/disk.c and common/part.c interfaces to manage the
partitioning.
The lsdev -l will additionally list the device path.
Reviewed by: imp, allanjude
Approved by: imp (mentor), allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D8581
The loader bcache is implementing simple read-ahead to boost the cache.
The bcache is built based on 512B block sizes, and the read ahead is attempting
to read number of cache blocks, based on amount of the free bcache space.
However, there are devices using larger sector sizes than 512B, most obviously
the CD media is based on 2k sectors. This means the read-ahead can not be just
random number of blocks, but we should use value suitable also for use with
larger sectors, as for example, with CD devices, we should read multiple of 2KB.
Since the sector size from disk interface is not too reliable, i guess we can
just use "good enough" value, so the implementation is rounding down the read
ahead block count to be multiple of 16.
This means we have covered sector sizes to 8k.
In addition, the update does implement the end of cache marker, to help to
detect the possible memory corruption - I have not seen it happening so far,
but it does not hurt to have the detection mechanism in place.
Reviewed by: allanjude
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D9179
Small summary
-------------
o Almost all IPsec releated code was moved into sys/netipsec.
o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel
option IPSEC_SUPPORT added. It enables support for loading
and unloading of ipsec.ko and tcpmd5.ko kernel modules.
o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by
default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type
support was removed. Added TCP/UDP checksum handling for
inbound packets that were decapsulated by transport mode SAs.
setkey(8) modified to show run-time NAT-T configuration of SA.
o New network pseudo interface if_ipsec(4) added. For now it is
build as part of ipsec.ko module (or with IPSEC kernel).
It implements IPsec virtual tunnels to create route-based VPNs.
o The network stack now invokes IPsec functions using special
methods. The only one header file <netipsec/ipsec_support.h>
should be included to declare all the needed things to work
with IPsec.
o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed.
Now these protocols are handled directly via IPsec methods.
o TCP_SIGNATURE support was reworked to be more close to RFC.
o PF_KEY SADB was reworked:
- now all security associations stored in the single SPI namespace,
and all SAs MUST have unique SPI.
- several hash tables added to speed up lookups in SADB.
- SADB now uses rmlock to protect access, and concurrent threads
can do SA lookups in the same time.
- many PF_KEY message handlers were reworked to reflect changes
in SADB.
- SADB_UPDATE message was extended to support new PF_KEY headers:
SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They
can be used by IKE daemon to change SA addresses.
o ipsecrequest and secpolicy structures were cardinally changed to
avoid locking protection for ipsecrequest. Now we support
only limited number (4) of bundled SAs, but they are supported
for both INET and INET6.
o INPCB security policy cache was introduced. Each PCB now caches
used security policies to avoid SP lookup for each packet.
o For inbound security policies added the mode, when the kernel does
check for full history of applied IPsec transforms.
o References counting rules for security policies and security
associations were changed. The proper SA locking added into xform
code.
o xform code was also changed. Now it is possible to unregister xforms.
tdb_xxx structures were changed and renamed to reflect changes in
SADB/SPDB, and changed rules for locking and refcounting.
Reviewed by: gnn, wblock
Obtained from: Yandex LLC
Relnotes: yes
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D9352
The use of DES for anything is discouraged, especially with a static IV of 0
If you still need bdes(1) to decrypt Kirk's video lectures, see
security/bdes in ports.
This commit brought to you by the FOSDEM DevSummit and the
"remove unneeded dependancies on openssl in base" working group
Reviewed by: bapt, brnrd
Relnotes: yes
Sponsored by: FOSDEM DevSummit
Differential Revision: https://reviews.freebsd.org/D9424
Need interface to extract information about disk abstraction,
to read disk or partition size depending on the provided argument
and adjust disk size based on information in partition table.
The disk handle from disk_open() has d_offset field to point to
partition start. So we can use this fact to return either whole disk
size or partition size. For this we only need to record partition size
we get from disk_open() anyhow.
In addition, this will also make it possible to adjust the disk media size
based on information from partition table. The problem with disk size is
about some BIOS systems reporting bogus disk size for 2+TB disks, but
since such disks are using GPT partitioning, and GPT does have information
about disk size (alternate LBA + 1), we can use this fact to record disk
size based on partition table.
This patch does exactly this: implements DIOCGSECTORSIZE and DIOCGMEDIASIZE
ioctl, and DIOCGMEDIASIZE will report either disk media size or partition size.
Adds ptable_getsize() call to read partition size in bytes from ptable pointer.
Updates disk_open() to use ptable_getsize() to update mediasize value.
Implements GPT detection function to update ptable size (used by
ptable_getsize()) according to alternate lba (which is location of backup copy
of GPT header table).
Reviewed by: allanjude
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D8594
mkimg for building on systems like FreeBSD 11.0 that don't have my
-a changes.
o Set NANO_ROOT and NANO_ALTROOT for std-* since their values don't
change when we set NANO_SLICE*.
PR: 216829
PR: 216830
'-n' to tell the driver to create _up to_ 'n' queues if enough cores are
available. For example, setting hw.cxgbe.nrxq10g="-32" will result in
16 queues if the system has 16 cores, 32 if it has 32.
There is no change in the default number of queues of any type.
MFC after: 1 week
Sponsored by: Chelsio Communications
* This fixes the phy_cfg field sent in the iwm_send_phy_cfg_cmd()
command, which wasn't taking into account the valid_rx_ant and
valid_tx_ant masks from nvm_data before.
Tested:
* 7260, STA mode, 2G and 5G
Obtained from: DragonflyBSD commit cbb82693c18fd71b4eb86855b82d03995f352d65
* This makes it a bit easier to factor out common parts for e.g. the
7000 chipset family.
* Add iwm7265d config, and recognize the 7265D chipset variant via the
hardware revision.
Tested:
* 7260, STA mode (2ghz)
Obtained from: Dragonflybsd commit cc8d6ccf5583fd45964f3bde9b057ee4f834c0e0
* sc->sc_nvm becomes sc->nvm_data and is now a pointer instead of an
inlined struct.
* Add sc->eeprom_size and sc->nvm_hw_section_num configuration values to
struct iwm_softc.
* For now continue to avoid negative error return-values, and use pointer
variables for some return values, as before.
* Continue to omit LAR (location aware regulatory) related code as well.
Tested:
* Intel 7260, STA mode (2GHz)
Obtained from: dragonflybsd commit 39f8331b1a6f295291e08c377da12a8e7a5436c0
The tty layer uses tsw_busy to poll for busy/idle status of the transmitter
hardware during close() and tcdrain(). The ucom layer defines ULSR_TXRDY and
ULSR_TSRE bits for the line status register; when both are set, the
transmitter is idle. Not all chip drivers maintain those bits in the sc_lsr
field, and if the bits never get set the transmitter will always appear
busy, causing hangs in tcdrain().
These changes add a new sc_flag bit, UCOM_FLAG_LSRTXIDLE. When this flag is
set, ucom_busy() uses the lsr bits to return busy vs. idle state, otherwise
it always returns idle (which is effectively what happened before this
change because tsw_busy wasn't implemented).
For the uftdi chip driver, these changes stop masking out the tx idle bits
when processing the status register (because now they're useful), and it
calls ucom_use_lsr_txbits() to indicate the bits are maintained by the
driver and can be used by ucom_busy().
Differential Revision: https://reviews.freebsd.org/D9183
and wrong numbering for a few unimplemented syscalls.
For 32-bit Linuxulator, socketcall() syscall was historically
the entry point for the sockets API. Starting in Linux 4.3, direct
syscalls are provided for the sockets API. Enable it.
The initial version of patch was provided by trasz@ and extended by me.
Submitted by: trasz
MFC after: 2 week
Differential Revision: https://reviews.freebsd.org/D9381
See r313275 for details.
One difference here is that recursion handling was removed from the fallback
routine. As it is it was never supposed to see a recursed lock in the first
place. Future changes will move it out of inline variants, but right now
there is no easy to way to test if the lock is recursed without reading
additional words.
and use it in compats instead of their sys_*() counterparts.
Reviewed by: kib, jhb, dchagin
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D9383