Map the device memory belonging to resources of type SYS_RES_MEMORY into
KVA upon activation so that rman_get_virtual() works as expected.
- In sbus_alloc_resource() checking whether toffs is 0 as an indication
that no applicable child range was found isn't appropriate as it's
perfectly valid for the requested SYS_RES_MEMORY resource to start at
the beginning of a child range. So check for the RMAN still being NULL
instead.
- As a minor runtime speed optimization break out of the loop where we
search for the applicable child range in sbus_alloc_resource() as soon
as it's found.
- Let sbus_setup_intr() return ENOMEM rather than 0 if it can't allocate
memory for the interrupt clearing info.
- Actually do what the comment in sbus_setup_intr() says and disable the
respective interrupt while fiddling with it.
- Remove some superfluous INTVEC() around inr, which already only contains
the interrupt vector, in sbus_setup_intr().
- While here, fix a style(9) bug in sbus_setup_intr() (don't use function
calls in initializers).
The first two changes are required for a CG6 driver.
MFC after: 2 weeks
Retire pmap_track_modified(). We no longer need it because we do not
create managed mappings within the clean submap. To prevent regressions,
add assertions blocking the creation of managed mappings within the clean
submap.
above what's used for fast interrupts, only interrupts with the level of
the interrupt which led to calling intr_fast() (which is used with both
fast and ithread interrupts) are blocked while in that function. Thus
intr_fast() can be preempted by a fast interrupt (which are of a higher
level than ithread interrupts) while servicing an ithread interrupt. This
can lead to a stale pointer to the head of the active interrupt requests
list when back in the ithread interrupt invocation of intr_fast(), in turn
resulting in corruption of the interrupt request lists and consequently
in a panic. Solve this be turning off interrupts in intr_fast() before
reading the pointer to the head of the active list rather than after. [1]
- Add a KASSERT in intr_fast() which asserts that ir_func is non-zero before
calling it. [1]
- Increment interrupt stats after calling the handlers rather than before.
This reduces the delay until direct and fast handlers are serviced, in my
testings by 30% on average for the direct tick interrupt handler, in turn
resulting in less clock drift.
PR: 94778 [1]
Submitted by: Andrew Belashov [1]
MFC after: 2 weeks
PCI devices apparently was changed from a special deferred trap with TPC
pointing to the membar #Sync following the failing load/store instruction
to a precise trap with TPC pointing to the failing load/store instruction.
Thus remove the check the check whether TPC points to a membar #Sync in
case of a data access trap as it's off-by-one for USIII CPUs and it should
be sufficient to check whether the trap happend while in fasword*() to
properly detect traps caused by peeking/poking. This also corresponds to
what other OSs do. Note that also only the USIIi manual suggests to check
the TPC for such traps while the USII one doesn't (in the public USIII
manual device peeking/poking isn't mentioned at all).
PCB in which the context of stopped CPUs is stored. To access this
PCB from KDB, we introduce a new define, called KDB_STOPPEDPCB. The
definition, when present, lives in <machine/kdb.h> and abstracts
where MD code saves the context. Define KDB_STOPPEDPCB on i386,
amd64, alpha and sparc64 in accordance to previous code.
- Use FBSDID in trap.c
- Make the global trap_sig[] static as it's not used outside of trap.c.
- In sendsig() remove an unused variable.
- In trap() sync with the other archs; for fast data access MMU miss and
data access protection traps set ksi_addr to the SFAR reg which contains
the faulting address and otherwise to the TPC reg. Generally the TCP reg
contains the address of the instruction that caused the exception, except
for fast instruction access traps (and some others; more refinement may
be needed here) it also contains the faulting address.
Previously sendsig() always set si_addr to the SFAR reg which is wrong
for most traps.
- In sendsig() add support for FreeBSD old-style signals.
These changes are inspired by kmacy's sun4v changes and allow libsigsegv
to build on FreeBSD/sparc64, but it doesn't pass all checks and tests it
actually should, yet.
MFC after: 5 days
foreign per-CPU pages in cpu_ipi_send() in order to get the module IDs
of the other CPUs can cause a page fault. If this happens when doing a
TLB shootdown while dealing with another page fault this causes a panic
due to the recursive page fault. As I don't spot other code that assumes
or requires that accessing foreign per-CPU pages must not page fault
solve this by adding a statically allocated (and therefore locked in the
kernel pages) array which establishes a FreeBSD CPU ID -> module ID
relation and use that in cpu_ipi_selected() (instead of statically
allocating the per-CPU pages which would just waste memory on say a dual
CPU machine as sun4u theoretically supports up to 128 CPUs or wasting
dTLB slots for the foreign per-CPU pages). [1]
- Fix a potential race in cpu_ipi_send(); as we don't serialize the access
to cpu_ipi_selected() between MI and MD use (only MI-MI and MD-MD) we
might catch the NACK bit caused by sending another IPI. Solve this by
checking the NACK bit in the contents of the interrupt dispatch status
reg read while interrupts were still turned off instead of reading that
reg anew after interrupts were turned on again. This is also what the
CPU docs suggest to do.
- Add a workaround for the SpitFire erratum #54 bug (affecting interrupt
dispatch). While public info regarding what this CPU bug actually causes
is not available testing shows that with the workaround in place it's
less likely to get a "couldn't send ipi" panic, it doesn't solve these
panics entirely though. [2]
Reported by: kris [1]
Some clue from: kmacy [1]
Info from: Linux, OpenSolaris [2]
Additional testing by: kris
MFC after: 3 days
as we have to call tick_init() before cninit() in order to provide the
low-level console drivers with a working DELAY() which in turn means we
cannot use panic() in tick_init().
- s,to high, too high, in the panic string
Inspired by: kmacy's sun4v changes
MFC after: 3 days
when option DEBUG_LOCKS is used. Trap frames are determined by checking
whether the caller was one of the tl0_*() or tl1_*() asm functions via
a newly added pair of dummy symbols in exception.S which mark the begin
and end of these functions. The tl_trap_* pair marks those in the special
.trap section and the tl_text_* in the regular .text section. Because
of their performance penalty db_search_symbol()/db_symbol_values() and
linker_ddb_search_symbol()/linker_ddb_symbol_values() aren't used here
for determining the caller, with db_search_symbol()/db_symbol_values()
additionally not being reentrant.
- For consistency, change db_backtrace() to also use the new markers for
determining the tl0_*() and tl1_*() asm functions instead of bcmp()'ing
the symbol name.
- Use FBSDID in db_trace.c.
PR: 93226
Based on a patch by: Antoine Brodin <antoine.brodin@laposte.net>
Ok'ed by: jhb
pages, not a count of bytes. The sysctl handler for hw.realmem already
uses ctob() to convert realmem from pages to bytes. Thus, on archs that
were storing a byte count in the realmem variable, hw.realmem was inflated.
Reported by: Valerio daelli valerio dot daelli at gmail dot com (alpha)
MFC after: 3 days
Keep accounting time (in per-cpu) cputicks and the statistics counts
in the thread and summarize into struct proc when at context switch.
Don't reach across CPUs in calcru().
Add code to calibrate the top speed of cpu_tickrate() for variable
cpu_tick hardware (like TSC on power managed machines).
Don't enforce monotonicity (at least for now) in calcru. While the
calibrated cpu_tickrate ramps up it may not be true.
Use 27MHz counter on i386/Geode.
Use TSC on amd64 & i386 if present.
Use tick counter on sparc64
Rename struct thread's td_sticks to td_pticks, we will need the
other name for more appropriately named use shortly. Reduce it
from uint64_t to u_int.
Clear td_pticks whenever we enter the kernel instead of recording
its value as reference for userret(). Use the absolute value of
td->pticks in userret() and eliminate third argument.
Keep track of time spent by the cpu in various contexts in units of
"cputicks" and scale to real-world microsec^H^H^H^H^H^H^H^Hclock_t
only when somebody wants to inspect the numbers.
For now "cputicks" are still derived from the current timecounter
and therefore things should by definition remain sensible also on
SMP machines. (The main reason for this first milestone commit is
to verify that hypothesis.)
On slower machines, the avoided multiplications to normalize timestams
at every context switch, comes out as a 5-7% better score on the
unixbench/context1 microbenchmark. On more modern hardware no change
in performance is seen.
in order to support the on-board LANCE in Ultra 1 and to the MI NOTES as
it should work just fine with the AMD PCnet family of chips on all archs
but is not yet meant to replace lnc(4). If a kernel includes all of le(4),
lnc(4) and pcn(4) precedence is given to lnc(4)/pcn(4) for now.
- Like lsi64854_scsi_intr() return -1 in case there was a DMA error so
the caller can distinguish it from a normal interrupt and leave the
reset of the DMA engine to the caller so we don't kill any state there.
- Move the static 'dodrain' flag to struct lsi64854_softc as there can
be more than one LSI64854 used for a LANCE in a system and reset it
again once draining the E-cache is done so we don't keep draining the
cache with every interrupt.
- Remove calling sc->sc_intrchain(), we will call lsi64854_enet_intr()
via sc->intr() in the interrupt handler of the LANCE driver and not
use it in chained mode.
o lsi64854_pp_intr():
- Like lsi64854_scsi_intr() return -1 in case there was a DMA error so
the caller can distinguish it from a normal interrupt.
o Remove the no longer used sc_intrchain* from struct lsi64854_softc.
o Make lsi64854_reset(), lsi64854_setup*() and lsi64854_*_intr() static
to lsi64854.c as we do and will only call them via the respective
function pointers in struct lsi64854_softc.
o While here fix style(9) bugs (variable definition inside a nested scope).
interrupt handler for the LANCE devices and remove dma_setup_intr(). We
just can't completely ignore the DMA engine in a LANCE driver anyway and
calling the DMA engine interrupt handler in the LANCE driver directly
allows to cover it by the LANCE driver lock.
and resume methods so these events propagate through the device driver
hierarchy.
- In dma(4) enable the chaining of the DMA engine interrupt handler for
the LANCE devices via a dma_setup_intr(). This was commented out before
as I was unsure whether I'd use it but this is probably cleaner than
fiddling with the DMA engine interrupt in the LANCE driver directly.
- In ebus_setup_dinfo() free 'intrs' instead of 'reg' twice in case
setting up a child fails due to routing one of its interrupts fails. [1]
Found by: Coverity Prevent [1]
MFC after: 3 days
operands are consumed so use the appropriate constraint modifier.
Before this change GCC used one register for both an input and an
unrelated output operand of in_addword(), causing the input to be
overwritten before it was consumed and thus breaking in_addword().
For in_cksum_hdr() and in_pseudo() this change is more or less
cosmetic.
- Fix a misspelling in a nearby comment.
Reported & tested by: yongari
MFC after: 1 week
to COMPAT_43TTY.
Add COMPAT_43TTY to NOTES and */conf/GENERIC
Compile tty_compat.c only under the new option.
Spit out
#warning "Old BSD tty API used, please upgrade."
if ioctl_compat.h gets #included from userland.
various pcib drivers to use their own private devclass_t variables for
their modules.
- Use the DEFINE_CLASS_0() macro to declare drivers for the various pcib
drivers while I'm here.
- provide an interface (macros) to the page coloring part of the VM system,
this allows to try different coloring algorithms without the need to
touch every file [1]
- make the page queue tuning values readable: sysctl vm.stats.pagequeue
- autotuning of the page coloring values based upon the cache size instead
of options in the kernel config (disabling of the page coloring as a
kernel option is still possible)
MD changes:
- detection of the cache size: only IA32 and AMD64 (untested) contains
cache size detection code, every other arch just comes with a dummy
function (this results in the use of default values like it was the
case without the autotuning of the page coloring)
- print some more info on Intel CPU's (like we do on AMD and Transmeta
CPU's)
Note to AMD owners (IA32 and AMD64): please run "sysctl vm.stats.pagequeue"
and report if the cache* values are zero (= bug in the cache detection code)
or not.
Based upon work by: Chad David <davidc@acns.ab.ca> [1]
Reviewed by: alc, arch (in 2004)
Discussed with: alc, Chad David, arch (in 2004)
with flags bitfield and set BI_CAN_EXEC_DYN flag for all brands that usually
allow executing elf dynamic binaries (aka shared libraries). When it is
requested to execute ET_DYN elf image check if this flag is on after we
know the elf brand allowing execution if so.
PR: kern/87615
Submitted by: Marcin Koziej <creep@desk.pl>
passing a pointer to an opaque clockframe structure and requiring the
MD code to supply CLKF_FOO() macros to extract needed values out of the
opaque structure, just pass the needed values directly. In practice this
means passing the pair (usermode, pc) to hardclock() and profclock() and
passing the boolean (usermode) to hardclock_cpu() and hardclock_process().
Other details:
- Axe clockframe and CLKF_FOO() macros on all architectures. Basically,
all the archs were taking a trapframe and converting it into a clockframe
one way or another. Now they can just extract the PC and usermode values
directly out of the trapframe and pass it to fooclock().
- Renamed hardclock_process() to hardclock_cpu() as the latter is more
accurate.
- On Alpha, we now run profclock() at hz (profhz == hz) rather than at
the slower stathz.
- On Alpha, for the TurboLaser machines that don't have an 8254
timecounter, call hardclock() directly. This removes an extra
conditional check from every clock interrupt on Alpha on the BSP.
There is probably room for even further pruning here by changing Alpha
to use the simplified timecounter we use on x86 with the lapic timer
since we don't get interrupts from the 8254 on Alpha anyway.
- On x86, clkintr() shouldn't ever be called now unless using_lapic_timer
is false, so add a KASSERT() to that affect and remove a condition
to slightly optimize the non-lapic case.
- Change prototypeof arm_handler_execute() so that it's first arg is a
trapframe pointer rather than a void pointer for clarity.
- Use KCOUNT macro in profclock() to lookup the kernel profiling bucket.
Tested on: alpha, amd64, arm, i386, ia64, sparc64
Reviewed by: bde (mostly)
to search for a specific extended capability. If the specified capability
is found for the given device, then the function returns success and
optionally returns the offset of that capability. If the capability is
not found, the function returns an error.
means:
o Remove Elf64_Quarter,
o Redefine Elf64_Half to be 16-bit,
o Redefine Elf64_Word to be 32-bit,
o Add Elf64_Xword and Elf64_Sxword for 64-bit entities,
o Use Elf_Size in MI code to abstract the difference between
Elf32_Word and Elf64_Word.
o Add Elf_Ssize as the signed counterpart of Elf_Size.
MFC after: 2 weeks
