The MMCHS hardware is pretty much a standard SDHCI v2.0 controller with a
couple quirks, which are now supported by sdhci(4) as of r254507.
This should work for all TI SoCs that use the MMCHS hardware, but it has
only been tested on AM335x right now, so this enables it on those platforms
but leaves the existing ti_mmchs driver in place for other OMAP variants
until they can be tested.
This initial incarnation lacks DMA support (coming soon). Even without it
this improves performance pretty noticibly over the ti_mmchs driver,
primarily because it now does multiblock IO.
This is a workaround to hide the fact that we do not have any code to
demote a superpage mapping before we unmap a single page that is part
of the superpage.
r254466 increased the KVA from 512GB to 2TB which requires 4 PDP pages as
opposed to a single one before the change. This broke minidumpsys() since
it assumed that the entire KVA could be addressed via a single PDP page.
Fix this by obtaining the address of the PDP page from the PML4 entry
associated with the KVA being dumped.
Reported by: pho
Submitted by: kib
Pointy hat to: neel
shown to negatively impact some workloads and the goal is only to
eliminate worst case behaviors for very long periods of paging
inactivity. Eventually we should determine a more complex scaling
factor for this feature.
- Rate limit low memory callback handlers to limit thrashing. Set the
default to 10 seconds.
Sponsored by: EMC / Isilon Storage Division
that don't support superpages. This keeps the number of spans and internal
fragmentation lower.
- When the user asks for alignment from vmem_xalloc adjust the imported size
by 2*align to be certain we can satisfy the allocation. This comes at
the expense of potential failures when the backend can't supply enough
memory but could supply the requested size and alignment.
Sponsored by: EMC / Isilon Storage Division
There is no need for calling vm_page_dirty() when clearing "modified" flag as
it is already set for that page in pmap_fault_fixup() or pmap_enter() thanks
to "modified" bit emulation.
Also, there is no need for checking PTE "referenced" or "writeable" flags. If
there is a request to clear a particular flag we should just do it.
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Reviewed by: gber
Sponsored by: The FreeBSD Foundation, Semihalf
Last input argument in pmap_modify_pv() should be a mask of flags to be set.
In pmap_change_wiring() however, the straight wired status was used, which
does not represent valid flags (and is of type boolean).
This commit fixes the issue so that wired flag is passed to pmap_modify_pv()
properly.
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Reviewed by: gber
Sponsored by: The FreeBSD Foundation, Semihalf
Revise L2_S_PROT_MASK to include all of the protection bits. Notice that
clearing these bits does not always take away the corresponding permissions
(for example, permission is granted when the bit is cleared). The bits are
cleared but are to be set or left cleared accordingly in pmap_set_prot(),
pmap_enter_locked(), etc.
Clear L2_XN along with L2_S_PROT_MASK in pmap_set_prot() so that all
permissions related bits are cleared before actual configuration.
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Reviewed by: gber
Sponsored by: The FreeBSD Foundation, Semihalf
- PGA_WRITEABLE indicates that there *might be* a writable mapping for the
particular page, so to avoid frequent sweeping of the pv_entries whenever
pmap_nuke_pv(), pmap_modify_pv(), etc. is called, it is sufficient to
clear that flag if there are no managed mappings for that page anymore
(notice that only pmap_enter is authorized to set this flag).
- Avoid redundant checking for PVF_WIRED flag when this flag cannot be set
anyway.
- Clear PGA_WRITEABLE only once for each vm_page instead of multiple,
redundant clearing it in loop when there are no writeable mappings
to that page anymore.
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Reviewed by: gber
Sponsored by: The FreeBSD Foundation, Semihalf
together.
Add M_FLAG_PRINTF for use with printf(9) %b indentifier.
Use the generic mbuf flags print names in the net80211 code and adjust
the protocol specific bits for their new positions.
Change SCTP M_PROTO mapping from 5 to 1 to fit within the 16bit field
they use internally to store some additional information.
Discussed with: trociny, glebius
M_LASTFRAG flags to protocol specific flags.
Remove the now unused M_FRAG, M_FIRSTFRAG and M_LASTFRAG mbuf flags.
Discussed with: trociny, glebius, adrian
for a very long time, if ever.
Should such a functionality ever be needed again the appropriate and
much better way to do it is through a custom EXT_SOMETHING external mbuf
type together with a dedicated *ext_free function.
Discussed with: trociny, glebius
flag instead. The flag is only used within the IP and IPv6 layer 3
protocols.
Because some firewall packages treat IPv4 and IPv6 packets the same the
flag should have the same value for both.
Discussed with: trociny, glebius
The sdhci spec says that if the base or timeout clock frequency in the
capabilities register is zero, the driver must obtain the frequency "from
another source." This change defines that other source to be the low-level
hardware driver, which can pre-set the frequencies in slot.max_clk and
slot.timeout_clk before calling sdhci_init_slot().
This helps with a growing number of SoCs that have sdhci base clock
frequencies that either won't fit into the range allowed by the number of
bits available in the capabilities register, or the frequency is runtime-
configurable.
blocks on a pmap lock, pmap_release() might proceed in parallel and
destroy the pmap mutex, since unlocked pv lock allows to remove pv
entry owned by the pmap.
For now, gate the pmap_release() on write-locked pvh_global_lock.
Since pmap_ts_release() does not unlock the global lock,
pmap_release() would not destroy pmap mutex until the
pmap_ts_referenced() finished. We cannot enter pmap_ts_referenced()
and encounter a pv entry for the destroyed pmap if pmap_release()
passed the global lock gate, since pmap_remove_pages() would finish
earlier.
Reported by: jeff, pho
Reviewed by: alc
Tested by: pho
Sponsored by: The FreeBSD Foundation
function, but returns directory file descriptor instead of closing it.
Submitted by: Mariusz Zaborski <oshogbo@FreeBSD.org>
Sponsored by: Google Summer of Code 2013
the response bits the way we do in software. While the hardware is just
doing the sensible thing rather than leaving it to the software, it's in
violation of the spec by doing so. Grrrr.
