The object lock was only needed when attempting to free B_DIRECT
buffer pages, and for testing for invalid pages (and freeing them
if so). Handle the latter by instead moving invalid pages near the head
of the inactive queue, where they will be reclaimed quickly.
Reviewed by: alc, kib, jeff
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D14778
Call _thr_check_init() before reading curthread in pthread_testcancel().
If a constructor in a library creates a semaphore via sem_init() and
then waits for it via sem_wait(), the program can core dump in
_pthread_testcancel() called from sem_wait(). This is because the
semaphore implementation lives in libc, so the library's constructors
can be run before libthr's constructors.
Reported by: arichardson
Reviewed by: kib
Obtained from: CheriBSD
MFC after: 1 week
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D14786
from entering the TIME_WAIT state. However, it omits sending the ACK for the
FIN, which results in RST. This becomes a bigger deal if the sysctl
net.inet.tcp.blackhole is 2. In this case RST isn't send, so the other side of
the connection (also local) keeps retransmitting FINs.
To fix that in tcp_twstart() we will not call tcp_close() immediately. Instead
we will allocate a tcptw on stack and proceed to the end of the function all
the way to tcp_twrespond(), to generate the correct ACK, then we will drop the
last PCB reference.
While here, make a few tiny improvements:
- use bools for boolean variable
- staticize nolocaltimewait
- remove pointless acquisiton of socket lock
Reported by: jtl
Reviewed by: jtl
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D14697
boot1 is too early to be deciding a good resolution. Console modes don't map
cleanly/predictably to actual screen resolutions, and GOP does not reflect
the actual screen resolution after a console mode change. Rip it out.
Add an efi-autoresizecons command to loader to choose an optimal screen
resolution based on the current environment. We'll explicitly execute this
later, preferably before we draw anything of value but after we load config
and pick up any tunables we may need to decide where we're going.
This method also allows us to actually pass the correct framebuffer
information on to the kernel.
UGA autoresizing is not implemented because it doesn't have the kind of mode
enumeration that GOP does. If an interested person with relevant hardware
could get in contact, we can take a look at implementing UGA autoresize.
This effectively "fixes" the breakage caused by r327058, but doesn't
actually set the resolution correctly until the interpreter calls
efi-autoresizcons. The lualoader version of this has been included for
reference; the forth equivalent will follow.
Reviewed by: imp (with some hestitation), manu
Differential Revision: https://reviews.freebsd.org/D14788
from jailed process. These might get implemented in jails in the
future, but for now they are not supported.
Discussed on: freebsd-security@
Reviewed by: brueffer@
MFC after: 2 weeks
The upstream repository is on github BLAKE2/libb2. Files landed in
sys/contrib/libb2 are the unmodified upstream files, except for one
difference: secure_zero_memory's contents have been replaced with
explicit_bzero() only because the previous implementation broke powerpc
link. Preferential use of explicit_bzero() is in progress upstream, so
it is anticipated we will be able to drop this diff in the future.
sys/crypto/blake2 contains the source files needed to port libb2 to our
build system, a wrapped (limited) variant of the algorithm to match the API
of our auth_transform softcrypto abstraction, incorporation into the Open
Crypto Framework (OCF) cryptosoft(4) driver, as well as an x86 SSE/AVX
accelerated OCF driver, blake2(4).
Optimized variants of blake2 are compiled for a number of x86 machines
(anything from SSE2 to AVX + XOP). On those machines, FPU context will need
to be explicitly saved before using blake2(4)-provided algorithms directly.
Use via cryptodev / OCF saves FPU state automatically, and use via the
auth_transform softcrypto abstraction does not use FPU.
The intent of the OCF driver is mostly to enable testing in userspace via
/dev/crypto. ATF tests are added with published KAT test vectors to
validate correctness.
Reviewed by: jhb, markj
Obtained from: github BLAKE2/libb2
Differential Revision: https://reviews.freebsd.org/D14662
An OCF-naive user program could use these primitives to implement HMAC, for
example. This would make the freed context sensitive data.
Probably other bzeros in this file should be explicit_bzeros as well.
Future work.
Reviewed by: jhb, markj
Differential Revision: https://reviews.freebsd.org/D14662 (minor part of a larger work)
"Under my tutelage Nicole did 85% of the work. At the time it seemed
simplest for a number of reasons to put my copyright on it. I now consider
that to have been a mistake."
Submitted by: Matthew Macy <mmacy@mattmacy.io>
Reviewed by: shurd
Approved by: shurd
Differential Revision: https://reviews.freebsd.org/D14766
through the lock-switching hoops.
A few of the INP lookup operations that lock INPs after the lookup do
so using this mechanism (to maintain lock ordering):
1. Lock lookup structure.
2. Find INP.
3. Acquire reference on INP.
4. Drop lock on lookup structure.
5. Acquire INP lock.
6. Drop reference on INP.
This change provides a slightly shorter path for cases where the INP
lock is uncontested:
1. Lock lookup structure.
2. Find INP.
3. Try to acquire the INP lock.
4. If successful, drop lock on lookup structure.
Of course, if the INP lock is contested, the functions will need to
revert to the previous way of switching locks safely.
This saves a few atomic operations when the INP lock is uncontested.
Discussed with: gallatin, rrs, rwatson
MFC after: 2 weeks
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D12911
On the Allwinner SoCs we need to set a custom endpoint configuration. To
allow for this use a table to store the configuration so the attachment
can override it.
Reviewed by: hselasky
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14783
In the original lualoader project, 'escapef' and 'escapeb' were chosen for
'escape fg' and 'escape bg'. We've carried on this naming convention, and as
our use of attributes grow the likeliness of 'escapeb'/'resetb' being
confused upon glance for 'escape bold'/'reset bold' increases.
Fix this by renaming these four functions to {escape,reset}{fg,bg} rather
than {escape,reset}{f,b} for clarity.
Reported by: dteske
Both sets are sorted in place, and with the introduction of read-only
permissions on the amd64 kernel text, the sorting override depended on
CR0.WP turned off. Make it correct by moving the sets into writeable
part of the KVA, also fixing boot on machines where hand-off from BIOS
to OS occurs with CR0.WP set.
Based on submission by: Peter Lei <peter.lei@ieee.org>
MFC after: 1 week
It mistakenly believes the 'static' keyword must come first. Fix PPC,
Sparc64, and maybe MIPS world. Fallout from r331279.
Reported by: tinderbox (results come slowly)
See: comments in the hook module about intended usage, as well as the
introduced use for config.reloaded.
Use the newly introduced hook module to define a "config.reloaded" hook.
This is currently used to register core's clearKernelCache as a reload hook
to avoid a circular dependency and fix this functionality- it didn't
actually work out, and it isn't immediately obvious how it slipped into src.
Other hook types will be introduced into the core lualoader as useful hook
points are identified.
The general idea here is to provide userspace programs with well-defined
sources of entropy, in a fashion that doesn't require opening a new file
descriptor (ulimits) or accessing paths (/dev/urandom may be restricted
by chroot or capsicum).
getrandom(2) is the more general API, and comes from the Linux world.
Since our urandom and random devices are identical, the GRND_RANDOM flag
is ignored.
getentropy(3) is added as a compatibility shim for the OpenBSD API.
truss(1) support is included.
Tests for both system calls are provided. Coverage is believed to be at
least as comprehensive as LTP getrandom(2) test coverage. Additionally,
instructions for running the LTP tests directly against FreeBSD are provided
in the "Test Plan" section of the Differential revision linked below. (They
pass, of course.)
PR: 194204
Reported by: David CARLIER <david.carlier AT hardenedbsd.org>
Discussed with: cperciva, delphij, jhb, markj
Relnotes: maybe
Differential Revision: https://reviews.freebsd.org/D14500
flag and both the regular and "no" names, instead of two different string
arrays whose indices need to match the flag's bit position. This makes
them similar to the say "jailsys" options are represented.
Loop through either kind of option array with a structure pointer rather
then an integer index.
Currently each bfp descriptor uses u64 variables to maintain its counters.
On interfaces with high packet rate this leads to unnecessary contention
and inaccurate reporting.
PR: kern/205320
Reported by: elofu17 at hotmail.com
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D14726
altq(4) to match altq(9). This makes preserving the history section as the
author of ALTQ easier in the history section, rather than calling it a framework
in the description & a system in the history.
Add a history section to altq(4) and extend the history section in altq(9)
Approved by: bcr (mentor)
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D14774
do this right, except when there's no BP and we do a TUR by request.
In that case, we clear the flag, but don't release the reference,
leaking the reference on rare occasion.
PR: 226510
Sponsored by: Netflix
were the new kids on the block and F00F hacks were all the rage, one
needed to take out Giant to do anything moderately complicated with
the VM, mappings and such. So the pccard / cardbus code held Giant for
the entire insertion or removal process.
Today, the VM is MP safe. The lock is only needed for dealing with
newbus things. Move locking and unlocking Giant to be only around
adding and probing devices in pccard and cardbus.
<machine/stdarg.h> is a kernel-only header. The standard header for
userland is <stdarg.h>. Using the standard header in userland avoids
weird build errors when building with external compilers that include
their own stdarg.h header.
Reviewed by: arichardson, brooks, imp
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D14776
Previously, we sent a CSI 0m sequence to reset attributes, which also reset
the color scheme if the terminal defaults didn't match what we're expecting.
Go all-in and reset the color scheme, too, just in case.
Reported by: emaste
I accidentally swapped 'linux_fixup_elf' to 'linux_elf_fixup' in amd64's
declaration (only), while bringing this change over from git and
encountering a conflict.
