since simply unlocking a mutex does not ensure that one of the waiters
will run and acquire it. We're more likely to reacquire the mutex
before anyone else has a chance. It has also bit me three times now, as
it's not safe to drop the interlock before sleeping in many cases.
Sponsored by: Isilon Systems, Inc.
objdump --disassemble when disassembling itself in userland. I've added
the cmovCC instruction group and tweaked a bunch of size sensitive array
indexes to either fix my mistakes and/or force it to work by any means
necessary.
I'm committing this because it is usable enough to see what is going on
when single stepping via ddb.
It might still tell lies, but its lies will be far more subtle now. I'm
not sure that this is a good thing or not.
instructions as it was when I dropped it back in May 31, 2003. I'm
committing this as an intermediate stage because back then I thought I
understood what I was doing with this file.
an ap in 11g with protection enabled
o correct rate selection when operating in 11g with protection when no
packets have been sent yet (from John Bicket)
o track api change to get first descriptor and use it to collect the frame
length for calculating the state bin
o add more debugging and shuffle some existing debugging to give more info
o bump version to distinguish bug fixes
to the rate control module for tx complete processing; this enables
rate control algorithms to extract the packet length for xmits that
require multiple descriptors
o ATA is now fully newbus'd and split into modules.
This means that on a modern system you just load "atapci and ata"
to get the base support, and then one or more of the device
subdrivers "atadisk atapicd atapifd atapist ataraid".
All can be loaded/unloaded anytime, but for obvious reasons you
dont want to unload atadisk when you have mounted filesystems.
o The device identify part of the probe has been rewritten to fix
the problems with odd devices the old had, and to try to remove
so of the long delays some HW could provoke. Also probing is done
without the need for interrupts, making earlier probing possible.
o SATA devices can be hot inserted/removed and devices will be created/
removed in /dev accordingly.
NOTE: only supported on controllers that has this feature:
Promise and Silicon Image for now.
On other controllers the usual atacontrol detach/attach dance is
still needed.
o Support for "atomic" composite ATA requests used for RAID.
o ATA RAID support has been rewritten and and now supports these
metadata formats:
"Adaptec HostRAID"
"Highpoint V2 RocketRAID"
"Highpoint V3 RocketRAID"
"Intel MatrixRAID"
"Integrated Technology Express"
"LSILogic V2 MegaRAID"
"LSILogic V3 MegaRAID"
"Promise FastTrak"
"Silicon Image Medley"
"FreeBSD PseudoRAID"
o Update the ioctl API to match new RAID levels etc.
o Update atacontrol to know about the new RAID levels etc
NOTE: you need to recompile atacontrol with the new sys/ata.h,
make world will take care of that.
NOTE2: that rebuild is done differently from the old system as
the rebuild is now done piggybacked on read requests to the
array, so atacontrol simply starts a background "dd" to rebuild
the array.
o The reinit code has been worked over to be much more robust.
o The timeout code has been overhauled for races.
o Support of new chipsets.
o Lots of fixes for bugs found while doing the modulerization and
reviewing the old code.
Missing or changed features from current ATA:
o atapi-cd no longer has support for ATAPI changers. Todays its
much cheaper and alot faster to copy those CD images to disk
and serve them from there. Besides they dont seem to be made
anymore, maybe for that exact reason.
o ATA RAID can only read metadata from all the above metadata formats,
not write all of them (Promise and Highpoint V2 so far). This means
that arrays can be picked up from the BIOS, but they cannot be
created from FreeBSD. There is more to it than just the missing
write metadata support, those formats are not unique to a given
controller like Promise and Highpoint formats, instead they exist
for several types, and even worse, some controllers can have
different formats and its impossible to tell which one.
The outcome is that we cannot reliably create the metadata of those
formats and be sure the controller BIOS will understand it.
However write support is needed to update/fail/rebuild the arrays
properly so it sits fairly high on the TODO list.
o So far atapicam is not supported with these changes. When/if this
will change is up to the maintainer of atapi-cam so go there for
questions.
HW donated by: Webveveriet AS
HW donated by: Frode Nordahl
HW donated by: Yahoo!
HW donated by: Sentex
Patience by: Vife and my boys (and even the cats)
carp_carpdev_state_locked() is called every time carp interface is attached.
The first call backs up flags of the first interface, and the second
call backs up them again, erasing correct values.
To solve this, a carp_sc_state_locked() function is introduced. It is
called when interface is attached to parent, instead of calling
carp_carpdev_state_locked. carp_carpdev_state_locked() calls
carp_sc_state_locked() for each sc in chain.
Reported by: Yuriy N. Shkandybin, sem
queues lock in vm_object_backing_scan(). Updates to the page's PG_BUSY
flag and busy field are synchronized by the containing object's lock.
Testing the page's hold_count and wire_count in vm_object_backing_scan()'s
OBSC_COLLAPSE_NOWAIT case is unnecessary. There is no reason why the held
or wired pages cannot be migrated to the shadow object.
Reviewed by: tegge
filesystem modules must be recompiled. (Since struct vnode has
already changed in 6-CURRENT, there's little advantage to leaving
the unused fields around.)
vnodes whose names it caches, so we no longer need a `generation
number' to tell us if a referenced vnode is invalid. Replace the use
of the parent's v_id in the hash function with the address of the
parent vnode.
Tested by: Peter Holm
Glanced at by: jeff, phk
except for places where people forget to update one of them. We now
collect only one set of stats for both of these routines. Other
changes in this commit include:
- Start acquiring Giant again in vn_fullpath(), since it is required
when crossing a mount point.
- Expand the scope of the cache lock to avoid dropping it and
picking it up again for every pathname component. This also
makes it trivial to avoid races in stats collection.
- Assert that nc_dvp == v_dd for directories instead of returning
an error to userland when this is not true. AFAIK, it should
always be true when v_dd is non-null.
- For vn_fullpath(), handle the first (non-directory) vnode
separately.
Glanced at by: jeff, phk
returns error. In this case mbuf has already been freed. [1]
- Remove redundant declaration.
PR: kern/78893 [1]
Submitted by: Liang Yi [1]
Reviewed by: sam
MFC after: 1 day
to cache_lookup(). This allows us to acquire the vnode interlock before
dropping the cache lock. This protects the vnodes identity until we
have locked it.
Sponsored by: Isilon Systems, Inc.
We don't need a mknod(2) call
No tricky install documentation
Kernel leave them dev_t alone
Hey Kernel leave them cdevsw alone
All in all it's just another struct in src/sys
All in all you're just another struct in src/sys
Don't remove the now unused element from cdev yet, wait until
we have a better reason to bump the version.
There is now no longer any upper limit on how many device drivers
a FreeBSD kernel can have.
only allow proper values. ENTROPYSOURCE is a maxval+1, not an
allowable number.
Suggested loose protons in the solution: phk
Prefers to keep the pH close to seven: markm
acquire shared locks on intermediate directories.
- For the LASTCN, we may have to LK_UPGRADE the parent directory before
we lookup the last component.
- Acquire VFS_ROOT and dp locks based on the cn_lkflag.
Sponsored by: Isilon Systems, Inc.
vhold()s us.
- Avoid an extra mutex acquire and release in the common case of vgonel()
by checking for OWEINACT at the start of the function.
- Fix the case where we set OWEINACT in vput(). LK_EXCLUPGRADE drops our
shared lock if it fails.
Sponsored by: Isilon Systems, Inc.
ExAllocatePoolWithTag(), not malloc(), so it should be released
with ExFreePool(), not free(). Fix a couple if instances of
free(fh, ...) that got overlooked.
- On amd64, InterlockedPushEntrySList() and InterlockedPopEntrySList()
are mapped to ExpInterlockedPushEntrySList and
ExpInterlockedPopEntrySList() via macros (which do the same thing).
Add IMPORT_FUNC_MAP()s for these.
- Implement ExQueryDepthSList().
alloc and free routine pointers in the lookaside list with pointers
to ExAllocatePoolWithTag() and ExFreePool() (in the case where the
driver does not provide its own alloc and free routines). For amd64,
this is wrong: we have to use pointers to the wrapped versions of these
functions, not the originals.
zero'ing their length (copied from m_adj where this code came from
after the equivalent change there has had time to soak)
Noticed by: Coverity Prevent analysis tool
This adds support for the SiS intergrated NIC on some Athlon64 motherboards.
The MAC address is stored in the APC CMOS RAM and this fixes the
sis driver ending up with a 00:00:00:00:00:00 MAC address.
Submitted by: Stasys Smailys <ssmailys@komvista.lt>
nll_obsoletelock field in the lookaside list structure is only defined
for the i386 arch. For amd64, the field is gone, and different list
update routines are used which do their locking internally. Apparently
the Inprocomm amd64 driver uses lookaside lists. I'm not positive this
will make it work yet since I don't have an Inprocomm NIC to test, but
this needs to be fixed anyway.
- Assert that REMOVE, CREATE, and RENAME callers have WANTPARENT
or LOCKPARENT set. You can't complete any of these operations without
at least a reference to the parent. Many filesystems check for this case
even though it isn't possible in the current system.
- Only unlock the directory if this is a DOTDOT lookup. Previously this
code could have deadlocked if there was a DOTDOT lookup with LOCKPARENT
set and another thread was locking the other way up the tree.
Sponsored by: Isilon Systems, Inc.
handled in vfs_lookup.c. This code was missing PDIRUNLOCK use prior
to the removal of PDIRUNLOCK in rev 1.73 of vfs_lookup.c.
Sponsored by: Isilon Systems, Inc.
handled in vfs_lookup.c. This code was missing PDIRUNLOCK use prior
to the removal of PDIRUNLOCK in rev 1.73 of vfs_lookup.c.
Sponsored by: Isilon Systems, Inc.
handled in vfs_lookup.c. This code was missing PDIRUNLOCK use prior
to the removal of PDIRUNLOCK in rev 1.73 of vfs_lookup.c.
Sponsored by: Isilon Systems, Inc.
rely on ufs to always leave the parent locked except in the ISDOTDOT
case. Adjust asserts to deal with these changes.
Sponsored by: Isilon Systems, Inc.
- In the ISDOTDOT case we have to unlock the dvp before locking the child,
if this fails we must relock dvp before returning an error. This was
missing before.
Sponsored by: Isilon Systems, Inc.
- Network filesystems are written with a special idiom that checks the
cache first, and may even unlock dvp before discovering that a network
round-trip is required to resolve the name. I believe dvp is prevented
from being recycled even in the forced unmount case by the shared lock
on the mount point. If not, this code should grow checks for VI_DOOMED
after it relocks dvp or it will access NULL v_data fields.
Sponsored by: Isilon Systems, Inc.
calling VOP_LOOKUP(). Rather than having each filesystem check the
LOCKPARENT flag, we simply check it once here and unlock as required.
The only unusual case is ISDOTDOT, where we require an unlocked vnode
on return. Relocking this vnode with the child locked is allowed since
the child is actually its parent.
- Add a few asserts for some unusual conditions that I do not believe can
happen. These will later go away and turn into implementations for these
conditions.
Sponsored by: Isilon Systems, Inc.
case where filesystems legitimately need to unlock the directory vp is
in the DOTDOT case, which we can explicitly check for in lookup().
Furthermore, allowing filesystems to unlock dvp can lead to lock order
reversals in lookup() when we vrele the dvp while the child is still
locked.
Sponsored by: Isilon Systems, Inc.
acpi_bus_alloc_gas() to delete the resource it set if alloc fails. Then,
change acpi_perf to delete the resource after releasing it if alloc fails.
This should make probe and attach both fully restartable if either fails.
and AMD Cool&Quiet PowerNow! (k8) cpufreq control. This driver is enabled
for both i386 and amd64 architectures. It has both acpi and legacy BIOS
attachments. Thanks to Bruno Ducrot for writing this driver and Jung-uk
Kim for testing.
Submitted by: Bruno Ducrot (ducrot:poupinou.org)
may help with various interdependencies between subsystems. More testing
is needed to understand what the underlying issues are here.
Tested by: Juho Vuori
MFC after: 2 days
variables in internal blocks.
Also, go ahead and fail if we can't load the firmware. It should have
failed like this, but never did (firmware loads generally don't fail).
some of which are rather serious:
- Use the device sysctl tree instead of rolling our own.
- Don't create a bus_dmamap_t to pass to bus_dmamem_alloc(), it is
bus_dmamem_alloc() that creates it itself. The DMA map created
by the driver was overwritten and its memory was leaked.
- Fix resource handling bugs in the error path of ixgb_dma_alloc().
- Don't use vtophys() to get the base address of the TX and RX rings
when busdma already gave us the correct address to use!
- Remove now useless includes and the alpha_XXX_dmamap() hack.
- Don't initialize if_output to ether_output(), ether_ifattach() does
it for us already.
- Add proper module dependencies on ether and pci.
Unfortunately, I'm not lucky enough to own an ixgb(4) card, nor a
machine with a bus where to plug it in and I couldn't find anyone able
to test these patches, so they are only build-tested and I won't MFC
them for 5.4-RELEASE.
This ensures that we explore EHCI busses before their companion
controllers' busses, so that ports connected to full/low speed
devices will be properly routed to the companion controllers by the
time the OHCI/UHCI exploration occurs.
work on SMP" saga. After several weeks and much gnashing of teeth,
I have finally tracked down all the problems, despite their best
efforts to confound and annoy me.
Problem nunmber one: the Atheros windows driver is _NOT_ a de-serialized
miniport! It used to be that NDIS drivers relied on the NDIS library
itself for all their locking and serialization needs. Transmit packet
queues were all handled internally by NDIS, and all calls to
MiniportXXX() routines were guaranteed to be appropriately serialized.
This proved to be a performance problem however, and Microsoft
introduced de-serialized miniports with the NDIS 5.x spec. Microsoft
still supports serialized miniports, but recommends that all new drivers
written for Windows XP and later be deserialized. Apparently Atheros
wasn't listening when they said this.
This means (among other things) that we have to serialize calls to
MiniportSendPackets(). We also have to serialize calls to MiniportTimer()
that are triggered via the NdisMInitializeTimer() routine. It finally
dawned on me why NdisMInitializeTimer() takes a special
NDIS_MINIPORT_TIMER structure and a pointer to the miniport block:
the timer callback must be serialized, and it's only by saving the
miniport block handle that we can get access to the serialization
lock during the timer callback.
Problem number two: haunted hardware. The thing that was _really_
driving me absolutely bonkers for the longest time is that, for some
reason I couldn't understand, my test machine would occasionally freeze
or more frustratingly, reset completely. That's reset and in *pow!*
back to the BIOS startup. No panic, no crashdump, just a reset. This
appeared to happen most often when MiniportReset() was called. (As
to why MiniportReset() was being called, see problem three below.)
I thought maybe I had created some sort of horrible deadlock
condition in the process of adding the serialization, but after three
weeks, at least 6 different locking implementations and heroic efforts
to debug the spinlock code, the machine still kept resetting. Finally,
I started single stepping through the MiniportReset() routine in
the driver using the kernel debugger, and this ultimately led me to
the source of the problem.
One of the last things the Atheros MiniportReset() routine does is
call NdisReadPciSlotInformation() several times to inspect a portion
of the device's PCI config space. It reads the same chunk of config
space repeatedly, in rapid succession. Presumeably, it's polling
the hardware for some sort of event. The reset occurs partway through
this process. I discovered that when I single-stepped through this
portion of the routine, the reset didn't occur. So I inserted a 1
microsecond delay into the read loop in NdisReadPciSlotInformation().
Suddenly, the reset was gone!!
I'm still very puzzled by the whole thing. What I suspect is happening
is that reading the PCI config space so quickly is causing a severe
PCI bus error. My test system is a Sun w2100z dual Opteron system,
and the NIC is a miniPCI card mounted in a miniPCI-to-PCI carrier card,
plugged into a 100Mhz PCI slot. It's possible that this combination of
hardware causes a bus protocol violation in this scenario which leads
to a fatal machine check. This is pure speculation though. Really all I
know for sure is that inserting the delay makes the problem go away.
(To quote Homer Simpson: "I don't know how it works, but fire makes
it good!")
Problem number three: NdisAllocatePacket() needs to make sure to
initialize the npp_validcounts field in the 'private' section of
the NDIS_PACKET structure. The reason if_ndis was calling the
MiniportReset() routine in the first place is that packet transmits
were sometimes hanging. When sending a packet, an NDIS driver will
call NdisQueryPacket() to learn how many physical buffers the packet
resides in. NdisQueryPacket() is actually a macro, which traverses
the NDIS_BUFFER list attached to the NDIS_PACKET and stashes some
of the results in the 'private' section of the NDIS_PACKET. It also
sets the npp_validcounts field to TRUE To indicate that the results are
now valid. The problem is, now that if_ndis creates a pool of transmit
packets via NdisAllocatePacketPool(), it's important that each time
a new packet is allocated via NdisAllocatePacket() that validcounts
be initialized to FALSE. If it isn't, and a previously transmitted
NDIS_PACKET is pulled out of the pool, it may contain stale data
from a previous transmission which won't get updated by NdisQueryPacket().
This would cause the driver to miscompute the number of fragments
for a given packet, and botch the transmission.
Fixing these three problems seems to make the Atheros driver happy
on SMP, which hopefully means other serialized miniports will be
happy too.
And there was much rejoicing.
Other stuff fixed along the way:
- Modified ndis_thsuspend() to take a mutex as an argument. This
allows KeWaitForSingleObject() and KeWaitForMultipleObjects() to
avoid any possible race conditions with other routines that
use the dispatcher lock.
- Fixed KeCancelTimer() so that it returns the correct value for
'pending' according to the Microsoft documentation
- Modfied NdisGetSystemUpTime() to use ticks and hz rather than
calling nanouptime(). Also added comment that this routine wraps
after 49.7 days.
- Added macros for KeAcquireSpinLock()/KeReleaseSpinLock() to hide
all the MSCALL() goop.
- For x86, KeAcquireSpinLockRaiseToDpc() needs to be a separate
function. This is because it's supposed to be _stdcall on the x86
arch, whereas KeAcquireSpinLock() is supposed to be _fastcall.
On amd64, all routines use the same calling convention so we can
just map KeAcquireSpinLockRaiseToDpc() directly to KfAcquireSpinLock()
and it will work. (The _fastcall attribute is a no-op on amd64.)
- Implement and use IoInitializeDpcRequest() and IoRequestDpc() (they're
just macros) and use them for interrupt handling. This allows us to
move the ndis_intrtask() routine from if_ndis.c to kern_ndis.c.
- Fix the MmInitializeMdl() macro so that is uses sizeof(vm_offset_t)
when computing mdl_size instead of uint32_t, so that it matches the
MmSizeOfMdl() routine.
- Change a could of M_WAITOKs to M_NOWAITs in the unicode routines in
subr_ndis.c.
- Use the dispatcher lock a little more consistently in subr_ntoskrnl.c.
- Get rid of the "wait for link event" hack in ndis_init(). Now that
I fixed NdisReadPciSlotInformation(), it seems I don't need it anymore.
This should fix the witness panic a couple of people have reported.
- Use MSCALL1() when calling the MiniportHangCheck() function in
ndis_ticktask(). I accidentally missed this one when adding the
wrapping for amd64.
count of valid frequencies and use that as the final package count, don't
give up when the first invalid state is found. Also, add 0x9999 and expand
our upper check to >= 0xffff Mhz [2].
Submitted by: Bruno Ducrot, Jung-uk Kim [2]
succeed if there was no media in the drive.
This was broken in rev 1.72 when the media check was added to cdioctl().
For now, check the ioctl group to decide whether to check for media or not.
(We only need to check for media on CD-specific ioctls.)
Reported by: bland
MFC after: 3 days
found it guilty in putting the card into unusable state after UP->DOWN->UP
media status change.
Looks like some of register writes in this functions mess up PHY interface.
No visible regressions has been found after commenting this code out -
the card properly handles forceful local mode changes and auto-detects changes
made remotely (tested with Auto, 10HD, 10FD, 100HD, 100FD).
Sponsored by: PBXpress Inc.
MFC after: 3 days
add more work are forced to process two worklist items first.
However, processing an item may generate additional work, causing the
unlucky thread to recursively process the worklist. Add a per-thread
flag to detect this situation and avoid the recursion. This should
fix the stack overflows that could occur while removing large
directory trees.
Tested by: kris
Reviewed by: mckusick
results in connectivty to MacOSX hosts via fwip.
Thanks to Apple's Arulchandran Paramasivam <arulchandranp@apple.com> for
letting us know what we were doing wrong.
Reviewed by: dfr
MFC After: 7 days
now always allocates a new vnode.
- Define a new function, vnlru_free, which frees vnodes from the free list.
It takes as a parameter the number of vnodes to free, which is
wantfreevnodes - freevnodes when called from vnlru_proc or 1 when
called from getnewvnode(). For now, getnewvnode() still tries to reclaim
a free vnode before creating a new one when we are near the limit.
- Define a function, vdestroy, which handles the actual release of memory
and teardown of locks, etc. This could become a uma_dtor() routine.
- Get rid of minvnodes. Now wantfreevnodes is 1/4th the max vnodes. This
keeps more unreferenced vnodes around so that files which have only
been stat'd are less likely to be kicked out of the system before we
have a chance to read them, etc. These vnodes may still be freed via
the normal vnlru_proc() routines which may some day become a real lru.
of the device id.
- Use BAR2 rather than BAR0 for the Rocketport UPCI 8O card. I suspect
that other UPCI cards might need to use BAR2 as well.
Tested by: wsk at gddsn dot org dot cn
MFC after: 1 week
actual root file system is mounted, the first entry on the mountlist
is not the root file system and the timestamp for that entry is
typically 0. Passing that to inittodr() caused annoying errors on
alpha and ia64.
So, call inittodr() for all file systems on mountlist, but only when
the timestamp (mnt_time) is non-zero.
with the wrong language parameter when retrieving the device serial
number. This invalid request caused some devices not to work at
all.
PR: usb/79190
Submitted by: Hans Petter Selasky <hselasky@c2i.net>
Instead, explicitly enable them when we setup the interrupt handler.
Also, move the setting of stathz and profhz down to the same place so
that the code flow is simpler and easier to follow.
- Don't setup an interrupt handler for IRQ0 if we are using the lapic timer
as it doesn't do anything productive in that case.
Replace a KASSERT of LINUX_IFNAMSIZ == IFNAMSIZ with a preprocessor
check and #error message. This will prevent nasty suprises if users
change IFNAMSIZ without updating the linux code appropriatly.
lockmgr locks that this thread owns. This is complicated due to
LK_KERNPROC and because lockmgr tolerates unlocking an unlocked lock.
Sponsored by: Isilon Systes, Inc.
these filesystems will support shared locks until they are explicitly
modified to do so. Careful review must be done to ensure that this
is safe for each individual filesystem.
Sponsored by: Isilon Systems, Inc.
these filesystems will support shared locks until they are explicitly
modified to do so. Careful review must be done to ensure that this
is safe for each individual filesystem.
Sponsored by: Isilon Systems, Inc.
lookup to do shared locks on the root. Filesystems are free to ignore
flags and instead acquire an exclusive lock if they do not support
shared locks.
Sponsored by: Isilon Systems, Inc.
before it can call VOP_INACTIVE(). This must use the EXCLUPGRADE path
because we may violate some lock order with another locked vnode if
we drop and reacquire the lock. If EXCLUPGRADE fails, we mark the
vnode with VI_OWEINACT. This case should be very rare.
- Clear VI_OWEINACT in vinactive() and vbusy().
- If VI_OWEINACT is set in vgone() do the VOP_INACTIVE call here as well.
Sponsored by: Isilon Systems, Inc.
necessary since we disable the shared locks in vfs_cache, but it is
prefered that the option not leak out into filesystems when it is
disabled.
Sponsored by: Isilon Systems, Inc.
config option have now been fixed. All filesystems are properly locked
and checked via DEBUG_VFS_LOCKS. Remove the workaround code.
Sponsored by: Isilon Systems, Inc.
non-maskable).
- The NFS client needs to guard against spurious wakeups
while waiting for the response. ltrace causes the process
under question to wakeup (possibly from ptrace()), which
causes NFS to wakeup from tsleep without the response being
delivered.
Submitted by: Mohan Srinivasan
disables tag queuing temporarily in order to allow controllers a window
to safely perform transfer negotiation with non-compliant devices. Before
this change, CAM would restore the queue depth to the controller specified
maximum or device quirk level rather than any depth determined by reactions
to QUEUE FULL/BUSY events or an explicit user setting.
During device probe, initialize the flags field for XPT_SCAN_BUS.
The uninitialized value often confused CAM into not bothering to
issue an AC_FOUND_DEVICE async event for new devices. The reason
this bug wasn't reported earlier is that CAM manually announces
devices after the initial system bus scans.
MFC: 3 days
svr4_do_getmsg(). In principle this bug could disclose data from
kernel memory, but in practice, the SVR4 emulation layer is probably
not functional enough to cause the relevant code path to be executed.
In any case, the emulator has been disconnected from the build since
5.0-RELEASE.
Found by: Coverity Prevent analysis tool
to kmem_alloc(). Failure to do this made it possible for user
processes to cause a hard lock on i386 kernels. I believe this only
affects 6-CURRENT on or after 2005-01-26.
Found by: Coverity Prevent analysis tool
Security: Local DOS
with the IP_HDRINCL option set. Without this change, a Linux process
with access to a raw socket could cause a kernel panic. Raw sockets
must be created by root, and are generally not consigned to untrusted
applications; hence, the security implications of this bug are
minimal. I believe this only affects 6-CURRENT on or after 2005-01-30.
Found by: Coverity Prevent analysis tool
Security: Local DOS
validation error in procfs/linprocfs that can be exploited by local
users to cause a kernel panic. All versions of FreeBSD with the patch
referenced in SA-04:17.procfs have this bug, but versions without that
patch have a more serious bug instead. This problem only affects
systems on which procfs or linprocfs is mounted.
Found by: Coverity Prevent analysis tool
Security: Local DOS
FreeBSD based on aue(4) it was picked by OpenBSD, then from OpenBSD ported
to NetBSD and finally NetBSD version merged with original one goes into
FreeBSD.
Obtained from: http://www.gank.org/freebsd/cdce/
NetBSD
OpenBSD
be pass-thru mode, when traffic is not copied by ng_tee, but passed thru
ng_netflow.
Changes made:
- In ng_netflow_rcvdata() do all necessary pulluping: Ethernet header,
IP header, and TCP/UDP header.
- Pass only pointer to struct ip to ng_netflow_flow_add(). Any TCP/UDP
headers are guaranteed to by after it.
- Merge make_flow_rec() function into ng_netflow_flow_add().
be pass-thru mode, when traffic is not copied by ng_tee, but passed thru
ng_netflow.
Changes made:
- In ng_netflow_rcvdata() do all necessary pulluping: Ethernet header,
IP header, and TCP/UDP header.
- Pass only pointer to struct ip to ng_netflow_flow_add(). Any TCP/UDP
headers are guaranteed to by after it.
- Merge make_flow_rec() function into ng_netflow_flow_add().
modern CPUs that have multiple VID#s that aren't detectable via public
methods. We use the control value from acpi_perf as the id16 for setting
a given frequency.
Add two another workarounds for carp(4) interfaces:
- do not add connected route when address is assigned to carp(4) interface
- do not add connected route when other interface goes down
Embrace workarounds with #ifdef DEV_CARP
(like an EC/SMbus controller) to access the EC address space. Access
is synchronized by the EcLock/Unlock routines in EcSpaceHandler().
Tested by: Hans Petter Selasky
configure_final(), assert that "cold" is true in usb_cold_explore()
when there are busses to explore. When USB is kldloaded after boot,
usb_cold_explore() will still get invoked but the list of busses
to explore in that case should always be empty.
transfer, which lead to panics or page faults. For example if a
transfer timed out, another thread could come along and attempt to
abort the same transfer while the timeout task was sleeping in
the *_abort_xfer() function.
Add an "aborting" flag to the private transfer state in each host
controller driver and use this to ensure that the abort is only
executed once. Also prioritise normal abort requests over timeouts
so that the callback is always given a status of USB_CANCELLED even
if the timeout-initiated abort began first.
The crashes caused by this bug were mainly reported in connection
with lpd printing to a USB printer.
PR: usb/78208, usb/78986
inevitable component in Sun Exx00 machines and provides serial ports,
NVRAM and TOD amongst others which are handled by uart(4) and eeprom(4)
respectively). This driver currently only prints out information about
the chassis on attach and allows to blink the 'Cycling' LED (which is
duplicated on the front panel) of the clock board just like fhc(4) does
for the other boards. The device name for the LED is /dev/led/clockboard.
Obtained from: OpenBSD
Tested by: joerg
bus_generic_rl_release_resource() for the bus_release_resource() method
instead of a local copy.
- Correctly handle pass-through allocations in fhc_alloc_resource().
- In case the board model can't be determined just print "unknown model"
so the physical slot number is reported in any case.
- Add support for blinking the 'Cycling' LED of boards on a fhc(4) hanging
of off the nexus (i.e. all boards except the clock board) via led(4).
All boards have at least 3 controllable status LEDs, 'Power', 'Failure'
and 'Cycling'. While the 'Cycling' LED is suitable for signaling from
the OS the others are better off being controlled by the firmware.
The device name for the 'Cycling' LED of each board is /dev/led/boardX
where X is the physical slot number of the board. [1]
Obtained from: OpenBSD [1]
Tested by: joerg [1]
bus_generic_rl_release_resource() for the bus_release_resource() method
instead of a local copy.
- Correctly handle pass-through allocations in central_alloc_resource().
This is mentioned in the Handbook but it is not as obvious to new
users why bpf is needed compared to the other largely self-explanatory
items in GENERIC.
PR: conf/40855
MFC after: 1 week
last in the list rather than first.
This makes the resouces print in the 4.x order rather than the 5.x order
(eg fdc0 at 0x3f0-0x3f5,0x3f7 is 4.x, but 0x3f7,0x3f0-0x3f5 is 5.x). This
also means that the pci code will once again print the resources in BAR
ascending order.
w/o problems than I was before... This simply brings back the knote_delete
as knlist_delete which will also drop the knote's, instead of just clearing
the list and seeing _ONESHOT...
Fix a race where if a note was _INFLUX and _DETACHED, it could end up being
modified... whoopse..
MFC after: 1 week
Prodded by: ambrisko and dwhite
same value as the previous ioctls so no binary change. Also, make a few
style changes to reduce diffs to my tree.
Loosely based on code from: Hans Petter Selasky
system have been attached, but no later. This ensures that we do
not explore ohci or uhci busses before the companion echi controller
has been initialised, so it should fix the problem of multi-speed
USB devices getting attached as USB 1 devices first and then
re-attached as USB 2.
Some further changes are needed on architectures that do not currently
allow hooks to be inserted before configure_final() - alpha, ia64,
powerpc and sparc64. On these architectures the exploration will
now be delayed until the usb kthread runs.
alignment restrictive, and help performance on some ethernet cards which
currently copy the entire packet a couple bytes to get the packet aligned
properly...
Wordsmithing by: dwhite
Obtained from: NetBSD (code only)
I'll clean it up later: rwatson
in the window between the beginning of panic() and entering the debugger,
it's possible to receive interrupts. If we receive an interrupt, don't
preempt if panicstr != NULL, as the system is in the process of failing, and
the preempting thread is likely to stumble over the failure. The typical
scenario is during the printf() in panic() prior to entering the debugger,
but when running with a slower console type such as serial console.
It could be that the panic string should be passed to the debugger to print,
so that it can run from the debugger's environment rather than a regular
kernel printf.
Glanced at by: jhb
Do our best to plug some memory leaks (VPD data, jumbo memory buffer,...).
Log if we cannot free because memory still in use[1].
Change locking to avoid ''acquiring duplicate lock of same
type: "network driver"'' and potential deadlock. Also seems to fix LOR #063.
[1] This change does not solve problems if buffers are still in use when
unloading if_sk.ko. There is ongoing work which will address jumbogram
allocations in a more general way.
PR: kern/75677 (with changes, no mii fixes in here)
Tested by: net, Antoine Brodin (slightly different version)
Approved by: rwatson (mentor)
MFC after: 5 days
Obtained from: NetBSD if_sk.c rev. 1.11
* Take PHY out of reset for Yukon Lite Rev. A3.
Submitted by: postings on net@ in thread "skc0: no PHY found", 2005-02-22
Tested by: net
Approved by: rwatson (mentor)
MFC after: 5 days
if the interface is marked RUNNING.
Obtained from: NetBSD if_sk.c rev. 1.12
* Don't initialize the card (and start an autonegotiation) every time the IP
address changes. Makes 'dhclient sk0' invocations way faster and more
consistant. i.e. one DHCPREQUEST elicits the DHCPACK.
Obtained from: OpenBSD if_sk.c rev. 1.56
* Additional locking changes in sk_ioctl.
PR: kern/61296 should see improvements by the last two.
Approved by: rwatson (mentor)
MFC after: 5 days
doing that in bfe_stop().
This should fix a panic recently reported on -current occuring when taking
device down then up. In the original implementation, an "ifconfig bfe0 down"
triggers bfe_stop(), which also destroys all TX/RX descriptor dmamaps. Hence
the subsequent "ifconfig bfe0 up" would force the device to use those
already-released dmamap and thus panic the kernel.
PR: kern/77804
Submitted by: Frank Mayhar <frank at exit dot com>
Reviewed by: dmlb, sam (mentor)
Tested by: Phil <pcasidy at casidy dot com>, myself
MFC after: 1 week
session in tprintf(). SESSRELE() needs to properly dispose of the
sessions mutex.
Add sessrele() which does the proper cleanup and have SESSRELE() call it.
Use SESSRELE also in pgdelete().
Found by: Coverity (ID:526)
a given page and, if the pmap is the current pmap, write back the associated
cache line.
Use pmap_wb_page in pmap_qenter() instead of inconditionally
write back/invalidating the data cache.
o Use IP_NPX in preference to hard coded value to write 0 to clear busy#
o Use md macro for a full reset of the npx
o Use IRQ_NPX in preference to hard coded value for each platform.
# The other two ifdefs in this file are hard to remove
rman_resource_resournce_bound wrt end parameter. The end parameter
here was the same as the start. However, it should be start + count -
1, so make it that instead.
it to get better hashing in vfs_hash.
In case of an insert collision in vfs_hash_insert(), put the loosing vnode
on a special list so that vfs_hash_remove() can just assume that it is on
a list.
Drop the VI_HASHED flag.
where having this disabled was actually hurting us, since so many
BIOSes include legacy USB emulation that takes control of all usb
ports and only the ehci driver knows how to disable it.
