instead of M_NOWAIT/M_WAITOK when deciding whether to sleep on page table
page allocation. (The same functions in the i386/xen and mips pmap
implementations already use PMAP_ENTER_NOSLEEP.)
X-MFC with: r269728
Sponsored by: EMC / Isilon Storage Division
mapping size (currently unused). The flags includes the fault access
bits, wired flag as PMAP_ENTER_WIRED, and a new flag
PMAP_ENTER_NOSLEEP to indicate that pmap should not sleep.
For powerpc aim both 32 and 64 bit, fix implementation to ensure that
the requested mapping is created when PMAP_ENTER_NOSLEEP is not
specified, in particular, wait for the available memory required to
proceed.
In collaboration with: alc
Tested by: nwhitehorn (ppc aim32 and booke)
Sponsored by: The FreeBSD Foundation and EMC / Isilon Storage Division
MFC after: 2 weeks
The MD allocators were very common, however there were some minor
differencies. These differencies were all consolidated in the MI allocator,
under ifdefs. The defines from machine/vmparam.h turn on features required
for a particular machine. For details look in the comment in sys/sf_buf.h.
As result no MD code left in sys/*/*/vm_machdep.c. Some arches still have
machine/sf_buf.h, which is usually quite small.
Tested by: glebius (i386), tuexen (arm32), kevlo (arm32)
Reviewed by: kib
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
We continue to use pmap_enter() for that. For unwiring virtual pages, we
now use pmap_unwire(), which unwires a range of virtual addresses instead
of a single virtual page.
Sponsored by: EMC / Isilon Storage Division
corresponding page tables followed by accesses to the pages in question.
This sequence is subject to the situation exactly described in the "AMD64
Architecture Programmer's Manual Volume 2: System Programming" rev. 3.23,
"7.3.1 Special Coherency Considerations" [1, p. 171 f.]. Therefore, issuing
the INVLPG right after modifying the PTE bits is crucial.
For pmap_copy_page(), this has been broken in r124956 and later on carried
over to pmap_copy_pages() derived from the former, while all other places
in the i386 PMAP code use the correct order of instructions in this regard.
Fixing the latter breakage solves the problem of data corruption seen with
unmapped I/O enabled when running at least bare metal on AMD R-268D APUs.
However, this might also fix similar corruption reported for virtualized
environments.
- In pmap_copy_pages(), correctly set the cache bits on the source page being
copied. This change is thought to be a NOP for the real world, though. [2]
1: http://amd-dev.wpengine.netdna-cdn.com/wordpress/media/2012/10/24593_APM_v21.pdf
Submitted by: kib [2]
Reviewed by: alc, kib
MFC after: 3 days
Sponsored by: Bally Wulff Games & Entertainment GmbH
the upstream implementation and helps ensure that a trap induced by tracing
fbt::trap:entry is handled without recursively generating another trap.
This makes it possible to run most (but not all) of the DTrace tests under
common/safety/ without triggering a kernel panic.
Submitted by: Anton Rang <anton.rang@isilon.com> (original version)
Phabric: D95
several reasons for this change:
pmap_change_wiring() has never (in my memory) been used to set the wired
attribute on a virtual page. We have always used pmap_enter() to do that.
Moreover, it is not really safe to use pmap_change_wiring() to set the wired
attribute on a virtual page. The description of pmap_change_wiring() says
that it assumes the existence of a mapping in the pmap. However, non-wired
mappings may be reclaimed by the pmap at any time. (See pmap_collect().)
Many implementations of pmap_change_wiring() will crash if the mapping does
not exist.
pmap_unwire() accepts a range of virtual addresses, whereas
pmap_change_wiring() acts upon a single virtual page. Since we are
typically unwiring a range of virtual addresses, pmap_unwire() will be more
efficient. Moreover, pmap_unwire() allows us to unwire superpage mappings.
Previously, we were forced to demote the superpage mapping, because
pmap_change_wiring() only allowed us to express the unwiring of a single
base page mapping at a time. This added to the overhead of unwiring for
large ranges of addresses, including the implicit unwiring that occurs at
process termination.
Implementations for arm and powerpc will follow.
Discussed with: jeff, marcel
Reviewed by: kib
Sponsored by: EMC / Isilon Storage Division
These changes prevent sysctl(8) from returning proper output,
such as:
1) no output from sysctl(8)
2) erroneously returning ENOMEM with tools like truss(1)
or uname(1)
truss: can not get etype: Cannot allocate memory
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statically and
dynamically created ones, except for the SYSCTL NODE type and SYSCTLs
which belong to VNETs. A new flag, CTLFLAG_NOFETCH, has been added to
be used in the case a tunable sysctl has a custom initialisation
function allowing the sysctl to still be marked as a tunable. The
kernel SYSCTL API is mostly the same, with a few exceptions for some
special operations like iterating childrens of a static/extern SYSCTL
node. This operation should probably be made into a factored out
common macro, hence some device drivers use this. The reason for
changing the SYSCTL API was the need for a SYSCTL parent OID pointer
and not only the SYSCTL parent OID list pointer in order to quickly
generate the sysctl path. The motivation behind this patch is to avoid
parameter loading cludges inside the OFED driver subsystem. Instead of
adding special code to the OFED driver subsystem to post-load tunables
into dynamically created sysctls, we generalize this in the kernel.
Other changes:
- Corrected a possibly incorrect sysctl name from "hw.cbb.intr_mask"
to "hw.pcic.intr_mask".
- Removed redundant TUNABLE statements throughout the kernel.
- Some minor code rewrites in connection to removing not needed
TUNABLE statements.
- Added a missing SYSCTL_DECL().
- Wrapped two very long lines.
- Avoid malloc()/free() inside sysctl string handling, in case it is
called to initialize a sysctl from a tunable, hence malloc()/free() is
not ready when sysctls from the sysctl dataset are registered.
- Bumped FreeBSD version to indicate SYSCTL API change.
MFC after: 2 weeks
Sponsored by: Mellanox Technologies
context into memory for the kernel threads which called
fpu_kern_thread(9). This allows the fpu_kern_enter() callers to not
check for is_fpu_kern_thread() to get the optimization.
Apply the flag to padlock(4) and aesni(4). In aesni_cipher_process(),
do not leak FPU context state on error.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
the queue where to enqueue pages that are going to be unwired.
- Add stronger checks to the enqueue/dequeue for the pagequeues when
adding and removing pages to them.
Of course, for unmanaged pages the queue parameter of vm_page_unwire() will
be ignored, just as the active parameter today.
This makes adding new pagequeues quicker.
This change effectively modifies the KPI. __FreeBSD_version will be,
however, bumped just when the full cache of free pages will be
evicted.
Sponsored by: EMC / Isilon storage division
Reviewed by: alc
Tested by: pho
This is needed for Xen PV(H) guests, since there's no hardware lapic
available on this kind of domains. This commit should not change
functionality.
Sponsored by: Citrix Systems R&D
Reviewed by: jhb
Approved by: gibbs
amd64/include/cpu.h:
amd64/amd64/mp_machdep.c:
i386/include/cpu.h:
i386/i386/mp_machdep.c:
- Remove lapic_ipi_vectored hook from cpu_ops, since it's now
implemented in the lapic hooks.
amd64/amd64/mp_machdep.c:
i386/i386/mp_machdep.c:
- Use lapic_ipi_vectored directly, since it's now an inline function
that will call the appropiate hook.
x86/x86/local_apic.c:
- Prefix bare metal public lapic functions with native_ and mark them
as static.
- Define default implementation of apic_ops.
x86/include/apicvar.h:
- Declare the apic_ops structure and create inline functions to
access the hooks, so the change is transparent to existing users of
the lapic_ functions.
x86/xen/hvm.c:
- Switch to use the new apic_ops.
sysarch(2) code.
Use M_ZERO instead of explicit bzero(9). Do not check for failed
allocation when M_WAITOK is specified (which is specified always).
Use malloc(9) when allocating memory for the intermediate copy of the
user-supplied buffer.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
a partially populated reservation becomes fully populated, and decrease this
field when a fully populated reservation becomes partially populated.
Use this field to simplify the implementation of pmap_enter_object() on
amd64, arm, and i386.
On all architectures where we support superpages, the cost of creating a
superpage mapping is roughly the same as creating a base page mapping. For
example, both kinds of mappings entail the creation of a single PTE and PV
entry. With this in mind, use the page size field to make the
implementation of vm_map_pmap_enter(..., MAP_PREFAULT_PARTIAL) a little
smarter. Previously, if MAP_PREFAULT_PARTIAL was specified to
vm_map_pmap_enter(), that function would only map base pages. Now, it will
create up to 96 base page or superpage mappings.
Reviewed by: kib
Sponsored by: EMC / Isilon Storage Division
they then pick up an opt_global.h from KERNBUILDDIR having PAE defined.
Thus, build all modules by default except those which still really are
defective as of r266799.
- Minor style cleanup.
MFC after: 1 week
freebsd-current. These CPU speed control techniques are usually unhelpful
at best. For now, continue building the relevant code into GENERIC so that
it can trivially be re-enabled at runtime if anyone wants it.
MFC after: 1 month
This is derived from the mps(4) driver, but it supports only the 12Gb
IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108.
Some notes about this driver:
o The 12Gb hardware can do "FastPath" I/O, and that capability is included in
this driver.
o WarpDrive functionality has been removed, since it isn't supported in
the 12Gb driver interface.
o The Scatter/Gather list handling code is significantly different between
the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather
lists.
Thanks to LSI for developing and testing this driver for FreeBSD.
share/man/man4/mpr.4:
mpr(4) man page.
sys/dev/mpr/*:
mpr(4) driver files.
sys/modules/Makefile,
sys/modules/mpr/Makefile:
Add a module Makefile for the mpr(4) driver.
sys/conf/files:
Add the mpr(4) driver.
sys/amd64/conf/GENERIC,
sys/i386/conf/GENERIC,
sys/mips/conf/OCTEON1,
sys/sparc64/conf/GENERIC:
Add the mpr(4) driver to all config files that currently
have the mps(4) driver.
sys/ia64/conf/GENERIC:
Add the mps(4) and mpr(4) drivers to the ia64 GENERIC
config file.
sys/i386/conf/XEN:
Exclude the mpr module from building here.
Submitted by: Steve McConnell <Stephen.McConnell@lsi.com>
MFC after: 3 days
Tested by: Chris Reeves <chrisr@spectralogic.com>
Sponsored by: LSI, Spectra Logic
Relnotes: LSI 12Gb SAS driver mpr(4) added
lindev(4) was only used to provide /dev/full which is now a standard feature of
FreeBSD. /dev/full was never linux-specific and provides a generally useful
feature.
Document this in UPDATING and bump __FreeBSD_version. This will be documented
in the PH shortly.
Reported by: jkim
the cpufreq code. Replace its use with smp_started. There's at least
one userland tool that still looks at the kern.smp.active sysctl, so
preserve it but point it to smp_started as well.
Discussed with: peter, jhb
MFC after: 3 days
Obtained from: Netflix
is already correctly reset to the FPU user save area, only PCB_KERNFPU
flag might leak from old thread state into the new state.
For creation of the user-mode thread, the change is nop since
corresponding syscall code does not use FPU. On the other hand,
creation of a kernel thread forks from a thread selected arbitrary
from proc0, which might use FPU.
Reported and tested by: Chris Torek <torek@torek.net>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
add it in kern.mk, but only if we're using clang. While this
option is supported by both clang and gcc, in the future there
may be changes to clang which change the defaults that require
a tweak to build our kernel such that other tools in our tree
will work. Set a good example by forcing -gdwarf-2 only for
clang builds, and only if the user hasn't specified another
dwarf level already. Update UPDATING to reflect the changed
state of affairs. This also keeps us from having to update
all the ARM kernels to add this, and also keeps us from
in the future having to update all the MIPS kernels and is
one less place the user will have to know to do something
special for clang and one less thing developers will need
to do when moving an architecture to clang.
Reviewed by: ian@
MFC after: 1 week
To reduce the diff struct pcu.cnt field was not renamed, so
PCPU_OP(cnt.field) is still used. pc_cnt and pcpu are also used in
kvm(3) and vmstat(8). The goal was to not affect externally used KPI.
Bump __FreeBSD_version_ in case some out-of-tree module/code relies on the
the global cnt variable.
Exp-run revealed no ports using it directly.
No objection from: arch@
Sponsored by: EMC / Isilon Storage Division
called with interrupts enabled. Calling fasttrap_pid_probe() with interrupts
disabled can lead to deadlock if fasttrap writes to the process' address
space.
Reviewed by: rpaulo
MFC after: 3 weeks
helps when bits and pieces of GENERIC from i386 or amd64 are cut and
pasted into other architecture's config files (which in the case of
ARM had gotten rather akimbo).
further refinement is required as some device drivers intended to be
portable over FreeBSD versions rely on __FreeBSD_version to decide whether
to include capability.h.
MFC after: 3 weeks
AppleTalk was a network transport protocol for Apple Macintosh devices
in 80s and then 90s. Starting with Mac OS X in 2000 the AppleTalk was
a legacy protocol and primary networking protocol is TCP/IP. The last
Mac OS X release to support AppleTalk happened in 2009. The same year
routing equipment vendors (namely Cisco) end their support.
Thus, AppleTalk won't be supported in FreeBSD 11.0-RELEASE.
IPX was a network transport protocol in Novell's NetWare network operating
system from late 80s and then 90s. The NetWare itself switched to TCP/IP
as default transport in 1998. Later, in this century the Novell Open
Enterprise Server became successor of Novell NetWare. The last release
that claimed to still support IPX was OES 2 in 2007. Routing equipment
vendors (e.g. Cisco) discontinued support for IPX in 2011.
Thus, IPX won't be supported in FreeBSD 11.0-RELEASE.
Currently XEN (PV) and XENHVM (PVHVM) ports use different ways to
issue hypercalls, unify this by filling the hypercall_page under HVM
also.
Approved by: gibbs
Sponsored by: Citrix Systems R&D
amd64/include/xen/hypercall.h:
- Unify Xen hypercall code by always using the PV way.
i386/i386/locore.s:
- Define hypercall_page on i386 XENHVM.
x86/xen/hvm.c:
- Fill hypercall_page on XENHVM kernels using the HVM method (only
when running as an HVM guest).
When running as a PVH guest, there's no emulated i8254, so we need to
use the Xen PV timer as the early source for DELAY. This change allows
for different implementations of the early DELAY function and
implements a Xen variant for it.
Approved by: gibbs
Sponsored by: Citrix Systems R&D
dev/xen/timer/timer.c:
dev/xen/timer/timer.h:
- Implement Xen early delay functions using the PV timer and declare
them.
x86/include/init.h:
- Add hooks for early clock source initialization and early delay
functions.
i386/i386/machdep.c:
pc98/pc98/machdep.c:
amd64/amd64/machdep.c:
- Set early delay hooks to use the i8254 on bare metal.
- Use clock_init (that will in turn make use of init_ops) to
initialize the early clock source.
amd64/include/clock.h:
i386/include/clock.h:
- Declare i8254_delay and clock_init.
i386/xen/clock.c:
- Rename DELAY to i8254_delay.
x86/isa/clock.c:
- Introduce clock_init that will take care of initializing the early
clock by making use of the init_ops hooks.
- Move non ISA related delay functions to the newly introduced delay
file.
x86/x86/delay.c:
- Add moved delay related functions.
- Implement generic DELAY function that will use the init_ops hooks.
x86/xen/pv.c:
- Set PVH hooks for the early delay related functions in init_ops.
conf/files.amd64:
conf/files.i386:
conf/files.pc98:
- Add delay.c to the kernel build.
