Move xenstore related devices (xenstore.c and xenstore_dev.c) from
xen/xenstore to dev/xen/xenstore. This is just code motion, no
functional changes.
Sponsored by: Citrix Systems R&D
This is done so we can prevent the Xen Balloon driver from attaching
before xenstore is setup.
Sponsored by: Citrix Systems R&D
dev/xen/balloon/balloon.c:
- Make xen balloon a driver that depends on xenstore.
Add the Xen specific implementation of pci_child_added to the Xen PCI
bus. This is needed so FreeBSD can register the devices it finds with
the hypervisor.
Sponsored by: Citrix Systems R&D
x86/xen/xen_pci.c:
- Add the Xen pci_child_added method.
This patch adds support for MSI interrupts when running on Xen. Apart
from adding the Xen related code needed in order to register MSI
interrupts this patch also makes the msi_init function a hook in
init_ops, so different MSI implementations can have different
initialization functions.
Sponsored by: Citrix Systems R&D
xen/interface/physdev.h:
- Add the MAP_PIRQ_TYPE_MULTI_MSI to map multi-vector MSI to the Xen
public interface.
x86/include/init.h:
- Add a hook for setting custom msi_init methods.
amd64/amd64/machdep.c:
i386/i386/machdep.c:
- Set the default msi_init hook to point to the native MSI
initialization method.
x86/xen/pv.c:
- Set the Xen MSI init hook when running as a Xen guest.
x86/x86/local_apic.c:
- Call the msi_init hook instead of directly calling msi_init.
xen/xen_intr.h:
x86/xen/xen_intr.c:
- Introduce support for registering/releasing MSI interrupts with
Xen.
- The MSI interrupts will use the same PIC as the IO APIC interrupts.
xen/xen_msi.h:
x86/xen/xen_msi.c:
- Introduce a Xen MSI implementation.
x86/xen/xen_nexus.c:
- Overwrite the default MSI hooks in the Xen Nexus to use the Xen MSI
implementation.
x86/xen/xen_pci.c:
- Introduce a Xen specific PCI bus that inherits from the ACPI PCI
bus and overwrites the native MSI methods.
- This is needed because when running under Xen the MSI messages used
to configure MSI interrupts on PCI devices are written by Xen
itself.
dev/acpica/acpi_pci.c:
- Lower the quality of the ACPI PCI bus so the newly introduced Xen
PCI bus can take over when needed.
conf/files.i386:
conf/files.amd64:
- Add the newly created files to the build process.
This switches code to using xpt_scan() routine, irrelevant to locking.
Using xpt_action() directly requires knowledge about higher level locks,
that SIM does not need to have.
This code is obsoleted, but that is not a reason to crash.
MFC after: 3 days
These variants have a few differences from the default AR9485 NIC,
namely:
* a non-default antenna switch config;
* slightly different RX gain table setup;
* an external XLNA hooked up to a GPIO pin;
* (and not yet done) RSSI threshold differences when
doing slow diversity.
To make this possible:
* Add the PCI device list from Linux ath9k, complete with vendor and
sub-vendor IDs for various things to be enabled;
* .. and until FreeBSD learns about a PCI device list like this,
write a search function inspired by the USB device enumeration code;
* add HAL_OPS_CONFIG to the HAL attach methods; the HAL can use this
to initialise its local driver parameters upon attach;
* copy these parameters over in the AR9300 HAL;
* don't default to override the antenna switch - only do it for
the chips that require it;
* I brought over ar9300_attenuation_apply() from ath9k which is cleaner
and easier to read for this particular NIC.
This is a work in progress. I'm worried that there's some post-AR9380
NIC out there which doesn't work without the antenna override set as
I currently haven't implemented bluetooth coexistence for the AR9380
and later HAL. But I'd rather have this code in the tree and fix it
up before 11.0-RELEASE happens versus having a set of newer NICs
in laptops be effectively RX deaf.
Tested:
* AR9380 (STA)
* AR9485 CUS198 (STA)
Obtained from: Qualcomm Atheros, Linux ath9k
While strictly speaking this is not correct since some fields are pointers,
it makes no difference on all supported archs and we already rely on it doing
the right thing in other places.
No functional changes.
In some code that is shared between the ixl(4) and ixlv(4) drivers,
a macro hard-coded a register offset that was not valid on ixlv devices.
Fix this by having each driver define a variable that contains the correct
offset.
Reviewed by: Eric Joyner <ricera10 AT gmail.com>
MFC after: 3 days
Sponsored by: Sandvine Inc
that the tty is dequeued from 'tty_list' only the first time.
The panic below was seen when a revoke(2) was issued on an nmdm device.
In this case there was also a thread that was blocked on a read(2) on the
device. The revoke(2) woke up the blocked thread which would typically
return an error to userspace. In this case the reader also held the last
reference on the file descriptor so fdrop() ended up calling tty_rel_free()
via ttydev_close().
tty_rel_free() then tried to dequeue 'tp' again which led to the panic.
panic: Bad link elm 0xfffff80042602400 prev->next != elm
cpuid = 1
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe00f9c90460
kdb_backtrace() at kdb_backtrace+0x39/frame 0xfffffe00f9c90510
vpanic() at vpanic+0x189/frame 0xfffffe00f9c90590
panic() at panic+0x43/frame 0xfffffe00f9c905f0
tty_rel_free() at tty_rel_free+0x29b/frame 0xfffffe00f9c90640
ttydev_close() at ttydev_close+0x1f9/frame 0xfffffe00f9c90690
devfs_close() at devfs_close+0x298/frame 0xfffffe00f9c90720
VOP_CLOSE_APV() at VOP_CLOSE_APV+0x13c/frame 0xfffffe00f9c90770
vn_close() at vn_close+0x194/frame 0xfffffe00f9c90810
vn_closefile() at vn_closefile+0x48/frame 0xfffffe00f9c90890
devfs_close_f() at devfs_close_f+0x2c/frame 0xfffffe00f9c908c0
_fdrop() at _fdrop+0x29/frame 0xfffffe00f9c908e0
sys_read() at sys_read+0x63/frame 0xfffffe00f9c90980
amd64_syscall() at amd64_syscall+0x2b3/frame 0xfffffe00f9c90ab0
Xfast_syscall() at Xfast_syscall+0xfb/frame 0xfffffe00f9c90ab0
--- syscall (3, FreeBSD ELF64, sys_read), rip = 0x800b78d8a, rsp = 0x7fffffbfdaf8, rbp = 0x7fffffbfdb30 ---
CR: https://reviews.freebsd.org/D851
Reviewed by: glebius, ed
Reported by: Leon Dang
Sponsored by: Nahanni Systems
MFC after: 1 week
This seems to allow us to pass a universe with either clang or gcc
after r272244 (and r272260) and probably makes it easier to untabgle
these chained #includes in the future.
if_var.h has the expected on and if_var.h include ifq.h and thus we get
duplicates. It seems only one cavium ethernet file actually includes ifq.h
directly which might be another cleanup to be done but need to test first.
There's a bug in the AR7240 PCIe hardware where a correct BAR will end
up having the device disappear.
It turns out that for the device address it should be all 0's.
However, this meant that the PCI probe code would try writing 0xffffffff
in to see how big the window was, read back 0x0, and think the window
was 32 bits. It then ended up calculating a resource size of 0 bytes,
failed to find anything via an rman call, and this would fail to attach.
I have quite absolutely no idea how in the various planes of existence
this particular bit of code and how it worked with the PCI bus code
ever worked. But, well, it did.
Tested:
* Atheros AP93 - AR7240 + AR9280 reference board
It was doing incorrect things with masks. This was fixed in the
AR71xx codebase but it wasn't yet fixed in the AR724x code.
This ended up having config space reads return larger/incorrect values
in some situations.
Tested:
* AR7240
TODO:
* test ar7241, AR7242, and AR934x.
Previously it was possible for issues e.g. use after free, to result
from processing the done queue while not holding the channel lock.
While this should never happen in practice, unexpected code flows
which result in two threads processing from the same queue may
be possible.
We now use a local STAILQ to prevent this ever being an issue.
Sponsored by: Multiplay
Do not pass wrong alignment value to fwdma_malloc_multiseg and ultimately
to contigalloc. In addition to being wrong, this causes insta-panic in
certain cases due to safety assertion - the alignment is required to be
the power of two and the value we calculate here seldom is.
MFC after: 1 month
Commit my version of style(9) pass over the firewire code. Now that
other people have started changing the code carrying this is as a
local patch is not longer a viable option.
MFC after: 1 month
