with some Dell servers that booted w/o a problem[*] on 5.4, but failed
with 6.0-BETA.
On the PCI bus, when we do lazy resource allocation, we narrow the
range requested as we pass through bridges to reflect how the bridges
are programmed and what addresses they pass. However, when we're
doing an allocation on a bus that's directly connected to a host
bridge, no such translation can take place. We already had a fallback
range for memory requests, but none for ioports. As such, provide a
fallback for I/O ports so we don't allocate location 0, which will
have undesired side effects when the resources are actually used.
This fixes a problem with booting a Dell server with usb in the
kernel. However, it is an unsatisfying solution. I don't like the
hard coded value, and I think we should start narrowing the resources
returned to not be in the so-called isa alias area (where the ranage &
0x0300 must be 0 iirc). Doing such filtering will have to wait for
another day.
This may be a good 6 candidate, maybe after its had a chance to be
refined.
Tested by: glebius@
tunable (until we get REPORT LUNS in place).
If we're probing luns, and each probe succeeds, we keep going past
lun 7 if we're a SCSI3 or better device (until we fail to probe).
If we're probing luns, and a probe fails, we only keep going if
we're quirked *for* it (CAM_QUIRK_HILUNS), and if we're not quirked
*against* it (CAM_QUIRK_NOHILUNS), or we're a SCSI3 or better device
and the tunable (kern.cam.cam_srch_hi) is set non-zero.
Reviewed by: nate@rootlabs.org, gibbs@scsiguy.com, ken@kdm.com, scottl@samsco.org
MFC after: 1 week
constraint is actually only allowed for register operands. Instead, use
separate input and output memory constraints.
Education from: alc
Reviewed by: alc
Tested on: i386, alpha
MFC after: 1 week
any other non-sleepable lock. In plain English: Giant comes before all
other mutexes.
- Add some extra description to the lock order reversal printf's to indicate
when a reversal is triggered by a hard-coded implicit rule.
Requested by: truckman (2)
MFC after: 1 week
possible method to prevent panicing in interrupt handler
after re_shutdown(), sometimes seen on SMP systems.
This would work here only because re_detach() clears
IFF_UP (to prevent another race) and it was demonstrated
that it's not enough to call vr_detach() in vr_shutdown()
to prevent a panic.
state where sleeping on a sleep queue is not allowed. The facility
doesn't support recursion but uses a simple private per-thread flag
(TDP_NOSLEEPING). The sleepq_add() function will panic if the flag is
set and INVARIANTS is enabled.
- Use this new facility to replace the g_xup and g_xdown mutexes that were
(ab)used to achieve similar behavior.
- Disallow sleeping in interrupt threads when invoking interrupt handlers.
MFC after: 1 week
Reviewed by: phk
- Fixed if_free() logic screw-up that can either result
in freeing a NULL pointer or leaking "struct ifnet".
- Move if_free() after re_stop(); the latter accesses
"struct ifnet". This bug was masked by a previous bug.
- Restore the fix for a panic on detach caused by racing
with BPF detach code by Bill by moving ether_ifdetach()
after re_stop() and resetting IFF_UP; this got screwed
up in revs. 1.30 and 1.36.
attempts to deallocate busdma tags and resources that haven't been
allocated yet, causing a panic every time a dc interface fails to
attach. Fix by checking that we really have something to dealloc
before calling bus_dma*() functions.
Approved by: jhb
MFC after: 1 week
and reloading it in i386_extend_pcb() rather than trying to force a context
switch to reload the TSS via the TDF_NEEDRESCHED flag. Optimizations to
avoid calling cpu_switch() when the new thread was identical to the old
thread defeated the attempt to force a TSS reload. Explicitly loading the
new TSS is what we really want to do anyway.
PR: i386/84842
Reported by: Alexander Best arundel at h3c dot de
MFC after: 1 week
Reviewed by: bde (mostly)
Change first MAXPATHLEN to more standard PATH_MAX
Change second MAXPATHLEN to 1024 (it is temp buffer not related)
Change comment to reflect that.
Suggested by: bde
- Use callout_init_mtx() and static callouts rather than timeout().
- m_getcl() in one place to simplify the code.
Tested by: Gavin Atkinson gavin dot atkinson at ury dot york dot ac dot uk
MFC after: 1 week
links and the execution of ELF binaries. Two problems were found:
1) The link path wasn't tagged as being MP safe and thus was not properly
protected.
2) The ELF interpreter vnode wasnt being locked in namei(9) and thus was
insufficiently protected.
This commit makes the following changes:
-Sets the MPSAFE flag in NDINIT for symbolic link paths
-Sets the MPSAFE flag in NDINIT and introduce a vfslocked variable which
will be used to instruct VFS_UNLOCK_GIANT to unlock Giant if it has been
picked up.
-Drop in an assertion into vfs_lookup which ensures that if the MPSAFE
flag is NOT set, that we have picked up giant. If not panic (if WITNESS
compiled into the kernel). This should help us find conditions where vnode
operations are in-sufficiently protected.
This is a RELENG_6 candidate.
Discussed with: jeff
MFC after: 4 days
when the base system is not compiled with NO_BIND set. Before we start
searching for mirrors, make sure that host(1) can be found, and if it
doesn't exist then fallback to the A record instead of the SRV records.
Submitted by: Luca Morettoni
shutdown procedures (which have a duration of more than 120 seconds).
We have two user-space affecting shutdown timeouts: a "soft" one in
/etc/rc.shutdown and a "hard" one in init(8). The first one can be
configured via /etc/rc.conf variable "rcshutdown_timeout" and defaults
to 30 seconds. The second one was originally (in 1998) intended to be
configured via sysctl(8) variable "kern.shutdown_timeout" and defaults
to 120 seconds.
Unfortunately, the "kern.shutdown_timeout" was declared "unused" in 1999
(as it obviously is actually not used within the kernel itself) and
hence was intentionally but misleadingly removed in revision 1.107 from
init_main.c. Kernel sysctl(8) variables are certainly a wrong way to
control user-space processes in general, but in this particular case the
sysctl(8) variable should have remained as it supports init(8), which
isn't passed command line flags (which in turn could have been set via
/etc/rc.conf), etc.
As there is already a similar "kern.init_path" sysctl(8) variable which
directly affects init(8), resurrect the init(8) shutdown timeout under
sysctl(8) variable "kern.init_shutdown_timeout". But this time document
it as being intentionally unused within the kernel and used by init(8).
Also document it in the manpages init(8) and rc.conf(5).
Reviewed by: phk
MFC after: 2 weeks
running" panics.
Previously, recursion through the "include" feature was prevented by
marking each ruleset as "running" when applied. This doesn't work for
the case where two DEVFS instances try to apply the same ruleset at
the same time.
Instead introduce the sysctl vfs.devfs.rule_depth (default == 1) which
limits how many levels of "include" we will traverse.
Be aware that traversal of "include" is recursive and kernel stack
size is limited.
MFC: after 3 days
that with the NIC set of registers rather than the ASIC registers. I
believe this was a harmless oversight, since we set ED_P0_CR to the
same value 5ms later, but just to be safe...
it is destroyed in GEOM, in addition to being removed from /dev.
Before this patch, if you applied a new MBR which deleted a slice,
the deleted slice would not be in /dev, but it would still appear
in kern.geom.conftxt and kern.geom.confxml, which would confused
the diskPartitionEditor in sysinstall.
Submitted by: pjd
Tested by: pjd, rodrigc
MFC after: 1 week
linked process was exec()'ed, and map samples in that address range
into the appropriate buckets in the runtime loader's profile.
Improve a few comments.
MFC after: 3 days
