All of these apply to both Huntington and Medford.
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4868
This should allow these functions to work for Medford as well.
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4866
All these fields will be used in shared ef10 code, so put them in an
ef10 member of a per-architecture union, rather that in the per-chip
union.
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4865
Creating some files together to do the build system changes in one go.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4859
Set WARNS if not set for EFI boot code and fix the issues highlighted by
setting it.
Most components are set to WARNS level 6 with few being left at lower
levels due to the amount of changes needed to fix at higher levels.
Error types fixed:
* Missing / invalid casts
* Missing inner structs
* Unused vars
* Missing static for internal only funcs
* Missing prototypes
* Alignment changes
* Use of uninitialised vars
* Unknown pragma (intrinsic)
* Missing types etc due to missing includes
* printf formatting types
Reviewed by: emaste (in part)
MFC after: 2 weeks
X-MFC-With: r293268
Sponsored by: Multiplay
Differential Revision: https://reviews.freebsd.org/D4839
This one mainly avoids mbuf cluster allocation for TCP ACKs during
TCP sending tests. And it gives me ~200Mbps improvement (4.7Gbps
-> 4.9Gbps), when running iperf3 TCP sending test w/ 16 connections.
While I'm here, nuke the unnecessary zeroing out pkthdr.csum_flags.
Reviewed by: adrain
Approved by: adrian (mentor)
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D4853
Many applications and kernel modules (e.g. bridge) rely on the ifmedia
status report; give them what they want.
Submitted by: Dexuan Cui <decui microsoft com>
Reviewed by: Jun Su <junsu microsoftc com>, me, adrian
Modified by: me (minor)
Original differential: https://reviews.freebsd.org/D4611
Differential Revision: https://reviews.freebsd.org/D4852
Approved by: adrian (mentor)
Sponsored by: Microsoft OSTC
- Implement the LRO using tcp_lro APIs, and LRO is enabled by default.
- Add several stats sysctl nodes.
- Check IP/TCP length before sending the packet to tcp_lro_rx(), if host
does not provide RX csum information (*); and add an option through
sysctl to always trust host TCP segment csum checks (default is off).
- Add sysctl to control the LRO entry depth; it is disabled by default.
It is used to avoid holding too much TCP segments in driver. Limiting
the LRO entry depth helps a lot in a one/two streams RX test.
This one 3x the RX performance on my local test (3Gbps -> 10Gbps), and
~2x the RX performance over a directly connected 40Ge network (5Gbps ->
9Gbps).
(*) It seems the host stops supplying csum information, once the network
load is high. This still needs investigation...
Reviewed by: Hongjiang Zhang <honzhan microsoft com>,
Dexuan Cui <decui microsoft com>,
Jun Su <junsu microsoft com>,
delphij
Tested by: me (local),
Hongjiang Zhang <honzhan microsoft com>
(directly connected 40Ge)
Approved by: delphij (mentor), adrian (mentor, no objection)
With feedback from: delphij, Hongjiang Zhang <honzhan microsoft com>
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D4824
This will allow to restore channel list after switching interface
to more restrictive regdomain.
Tested with Intel 3945BG (wpi) only.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D4863
This fixes the potential NULL pointer dereference properly, and also fixes
memory leaks encountered in the process of iterating through `*rp`.
MFC after: 1 week
Found by: Valgrind
Reported by: Dan Roberts <dan.roberts@isilon.com>
Submitted by: Miles Ohlrich <miles.ohlrich@isilon.com>
Sponsored by: EMC / Isilon Storage Division
After r292066, vdev_geom verifies both the vdev and pool guids of device
labels during open. However, spare and l2arc devices don't have pool guids,
so opening them by guid will fail (opening by path, when the pathname is
known, still succeeds). This change allows a vdev to be opened by guid if
the label contains no pool_guid, which is the case for inactive spares and
l2arc devices.
PR: 292066
Reported by: delphij
Reviewed by: delphij, smh
MFC after: 2 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D4861
__rpcbind_is_up(..) if getnetconfig(3) is partly successful in allocating
resources, but not completely successful by moving the endnetconfig(3) call
up before we return from the function if nconf == NULL.
MFC after: 1 week
Reported by: Coverity
Submitted by: Miles Ohlrich <miles.ohlrich@isilon.com>
Sponsored by: EMC / Isilon Storage Division
In the event that the getconfig(3) call in svcunix_create is partly successful,
some of the netconfig(3) resources allocated might be leaked if the call returns
NULL as endnetconfig(3) wasn't called explicitly in that case. Ensure that the
resources are fully cleaned up by going to the `done` label, which will call
endnetconfig(3) for us.
MFC after: 1 week
Reported by: Coverity
Submitted by: Miles Ohlrich <miles.ohlrich@isilon.com>
Sponsored by: EMC / Isilon Storage Division
by busdma to the blkfront driver must be an integer number of sectors,
and must be aligned in memory on a "sector" boundary.
Having these assertions yesterday would have made finding the bug fixed
in r293698 somewhat easier.
"The problem with the approach taken both in _bus_dmamap_load_pages and
bus_dmamap_load_ma_triv is that they split the request buffer into
arbitrary chunks based on page boundaries, creating segments that no
longer have a size that's a multiple of the sector size. This breaks
drivers like blkfront (and probably other stuff)." [1]
This was most easily triggered by running `fsck /` on a system running
in Xen (e.g. Amazon EC2) but also showed up via growfs(8) and probably
many other userland tools which access the disk directly.
Patch by: royger [1]
"Thinks this should be fine" by: ken
Add support for sparse files in ext4. Also implement read-ahead, which
greatly increases the performance when transferring files from ext4.
Both features implemented by Damjan Jovanovic.
PR: 205816
MFC after: 1 week
from int to int64.
MSDN says that SMB_SET_FILE_END_OF_FILE_INFO uses signed 64-bit integer
to specify offset, but since smbfs_smb_setfsize() has used plain int,
a value was truncated in case when offset was larger than 2G.
https://msdn.microsoft.com/en-us/library/ff469975.aspx
In particular, now `truncate -s 10G` will work correctly on the mounted
SMB share.
Reported and tested by: Eugene Grosbein <eugen at grosbein dot net>
MFC after: 1 week
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_geom.c:
If available, record the physical path of a vdev in ZFS meta-data.
Do this both when opening the vdev, and when receiving an attribute
change notification from GEOM.
Make vdev_geom_close() synchronous instead of deferring its work to
a GEOM event handler. There is no benefit to deferring the work and
this prevents a future open call from referencing a consumer that is
scheduled for destruction. The close followed by an immediate open
will occur during a vdev reprobe triggered by any type of I/O error.
Consolidate vdev_geom_close() and vdev_geom_detach() into
vdev_geom_close() and vdev_geom_close_locked(). This also moves the
cross linking operations between vdev and GEOM consumer into a
single place (linking in vdev_geom_attach() and unlinking in
vdev_geom_close_locked()).
Submitted by: gibbs, asomers
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D4524
member secsz was a uint16_t
sys/boot/zfs/zfs.c has a probe args structure member, secsz, that is a
uint16_t for media sector size; it is used as an argument for ioctl()
at line 484. however, this ioctl writes 32 bits of data (u_int *) and
therefore this ioctl will overwrite and corrupt 16 bits of memory.
other use cases seem to use correct u_int type for secsz.
PR: 204358
Submitted by: Toomas Soome <tsoome at me.com>
Reviewed by: asomers, delphij, smh
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D4811
Ensure that all iSCSI sessions are correctly terminated during shutdown.
* Enhances the changes done by r286226 (D3052).
* Add shutdown post sync event to run after filesystem shutdown
(SHUTDOWN_PRI_FIRST) but before CAM shutdown (SHUTDOWN_PRI_DEFAULT).
* Changes iscsi_maintenance_thread to processes terminate in preference to
reconnect.
Reviewed by: trasz
MFC after: 2 weeks
Sponsored by: Multiplay
Differential Revision: https://reviews.freebsd.org/D4429
Move actual rte selection process from rtalloc_mpath_fib()
to the rt_path_selectrte() function. Add public
rt_mpath_select() to use in fibX_lookup_ functions.
Submitted by: Jun Su <junsu microsoft com>
Reviewed by: Dexuan Cui <decui microsoft com>, me, adrain
Approved by: adrian
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D4762
generate code to branch based on an address in a register. This allows us
to have binaries larger than the 32MiB limit of a branch instruction.
The main use of this is with clang. Clang 3.8.0 has been shown to be larger
than the above limit.
- Add a description of Advantech PCI-1602 Rev. A boards. [1]
- Properly set up REG_ACR also for PCI-1602 Rev. A based on what the
Advantech-supplied Linux driver does.
- Additionally use the macros of <dev/ic/ns16550.h> to replace existing
magic values and get rid of trivial comments.
- Fix the style of some comments.
PR: 205359 [1]
Submitted by: Jan Mikkelsen (original patch) [1]
more than once when doing round-robin.
This lead to a panic because the iterator was trying the same domain
twice and not trying one of the other domains.
Reported by: pho
Tested by: pho
Some variables like PATH call a function when modified. Make sure to call
this also when leaving a function where such a variable was made local.
Make sure to restore local variables before shellparam, so getopts state is
not clobbered.
in6_selectsrc() has 2 class of users: socket-based one (raw/udp/pcb/etc) and
socket-less (ND code). The main reason for that change is inability to
specify non-default FIB for callers w/o socket since (internally) inpcb
is used to determine fib.
As as result, add 2 wrappers for in6_selectsrc() (making in6_selectsrc()
static):
1) in6_selectsrc_socket() for the former class. Embed scope_ambiguous check
along with returning hop limit when needed.
2) in6_selectsrc_addr() for the latter case. Add 'fibnum' argument and
pass IPv6 address w/ explicitly specified scope as separate argument.
Reviewed by: ae (previous version)
