fixes and beacon programming / debugging into the ath(4) driver.
The basic power save tracking:
* Add some new code to track the current desired powersave state; and
* Add some reference count tracking so we know when the NIC is awake; then
* Add code in all the points where we're about to touch the hardware and
push it to force-wake.
Then, how things are moved into power save:
* Only move into network-sleep during a RUN->SLEEP transition;
* Force wake the hardware up everywhere that we're about to touch
the hardware.
The net80211 stack takes care of doing RUN<->SLEEP<->(other) state
transitions so we don't have to do it in the driver.
Next, when to wake things up:
* In short - everywhere we touch the hardware.
* The hardware will take care of staying awake if things are queued
in the transmit queue(s); it'll then transit down to sleep if
there's nothing left. This way we don't have to track the
software / hardware transmit queue(s) and keep the hardware
awake for those.
Then, some transmit path fixes that aren't related but useful:
* Force EAPOL frames to go out at the lowest rate. This improves
reliability during the encryption handshake after 802.11
negotiation.
Next, some reset path fixes!
* Fix the overlap between reset and transmit pause so we don't
transmit frames during a reset.
* Some noisy environments will end up taking a lot longer to reset
than normal, so extend the reset period and drop the raise the
reset interval to be more realistic and give the hardware some
time to finish calibration.
* Skip calibration during the reset path. Tsk!
Then, beacon fixes in station mode!
* Add a _lot_ more debugging in the station beacon reset path.
This is all quite fluid right now.
* Modify the STA beacon programming code to try and take
the TU gap between desired TSF and the target TU into
account. (Lifted from QCA.)
Tested:
* AR5210
* AR5211
* AR5212
* AR5413
* AR5416
* AR9280
* AR9285
TODO:
* More AP, IBSS, mesh, TDMA testing
* Thorough AR9380 and later testing!
* AR9160 and AR9287 testing
Obtained from: QCA
Some code will appear soon that is actually setting the chip powerstate
separate from the self-generated frames power state.
* Allow the AR5416 family chips to actually have the power state changed
from the self generated state change.
Tested (STA mode):
* AR5210
* AR5211
* AR5412
* AR5413
* AR5416
* AR9285
All rtsock-initiated rte creation/modification are now
performed in route.c holding radix tree write lock.
This reduces the need for per-rte mutex.
Sponsored by: Yandex LLC
MFC after: 1 month
the 'HLT' instruction. This condition was detected by 'vm_handle_hlt()' and
converted into the SPINDOWN_CPU exitcode . The bhyve(8) process would exit
the vcpu thread in response to a SPINDOWN_CPU and when the last vcpu was
spun down it would reset the virtual machine via vm_suspend(VM_SUSPEND_RESET).
This functionality was broken in r263780 in a way that made it impossible
to kill the bhyve(8) process because it would loop forever in
vm_handle_suspend().
Unbreak this by removing the code to spindown vcpus. Thus a 'halt' from
a Linux guest will appear to be hung but this is consistent with the
behavior on bare metal. The guest can be rebooted by using the bhyvectl
options '--force-reset' or '--force-poweroff'.
Reviewed by: grehan@
into the area backed by vm_page_array wrongly compared end with
vm_page_array_size. It should be adjusted by first_page index to be
correct.
Also, the corner and incorrect case of the requested range extending
after the end of the vm_page_array was incorrectly handled by
allocating the segment.
Fix the comparision for the end of range and return EINVAL if the end
extends beyond vm_page_array.
Discussed with: royger
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
pmap pvlist locks which are scaled by MAXCPU.
This allows an amd64 system to boot with MAXCPU set
to 256, which is currently FreeBSD's hard limit without
x2apic support.
Compile-tested for other arch's.
PR: 185831
Discussed with: jhb
MFC after: 3 weeks
commit 1d1b908107255ffdff4d17f015d8f057d73cc6cb
Author: Brooks Davis <brooks@one-eyed-alien.net>
Date: Fri Mar 28 16:24:45 2014 +0000
Add a long needed seatbelt.
Exit with an error when make is called without a target at the top level
rather than poluting the source tree and causing use confusion in future
builds.
commit a9d9aa341b2f4308a227ab460ba85f1f287ad028
Author: Brooks Davis <brooks@one-eyed-alien.net>
Date: Tue Apr 29 16:06:12 2014 +0000
Simplify seatbelt added in 1d1b908 based in feedback.
Discussed with: imp@FreeBSD.org
Reviewed by: imp
Sponsored by: DARPA, AFRL
netstat has two options for printing multicast tables:
sysctl (the default one for live systems) and kvm-based one (for cores).
It looks like kvm-based one hasn't been working since it's been introduced
in r190012 due to absence of mfctablesize kernel symbol.
Check for all ipv4-multicast symbols being correctly resolved was introduced
in r259638 regardless of 'live' value leading to "No IPv4 MROUTING" error
message.
Reported by: Olivier Cochard-Labbé
MFC after: 1 week
exists on another interface. The panic was introduced by change 264887, which
changed the fibnum parameter in the call to rtalloc1_fib() in
ifa_switch_loopback_route() from RT_DEFAULT_FIB to RT_ALL_FIBS. The solution
is to use the interface fib in that call. For the majority of users, that will
be equivalent to the legacy behavior.
PR: kern/189089
Reported by: neel
Reviewed by: neel
MFC after: 3 weeks
X-MFC with: 264887
Sponsored by: Spectra Logic
2008-03-13 Dennis Czeremin <dennis.czeremin@smiths-heimann.com>
PR libstdc++/35566
* include/bits/stl_multimap.h (multimap<>::multimap(_InputIterator,
_InputIterator)): Forward to _M_insert_equal, not _M_insert_unique.
This patch was GPL2 at the time and fixes a regression introduced with
the merge of GCC r129013 in FreeBSD r236829.
MFC after: 3 days
Sponsored by: Bally Wulff Games & Entertainment GmbH
platforms which do not use loaders or kernels that want to hardcode
options or for FDT passed in by loader.
Also fix a build issue by putting the kmdp variable accessed back under
the #ifdef FDT; we may wish to revisit decision in which case more
code needs changing.
Submitted by: brooks
by adding an argument to the VM_SUSPEND ioctl that specifies how the virtual
machine should be suspended, viz. VM_SUSPEND_RESET or VM_SUSPEND_POWEROFF.
The disposition of VM_SUSPEND is also made available to the exit handler
via the 'u.suspended' member of 'struct vm_exit'.
This capability is exposed via the '--force-reset' and '--force-poweroff'
arguments to /usr/sbin/bhyvectl.
Discussed with: grehan@
old devd's and thus hosts that get IP addresses from DHCP was too much
of a POLA violation.
The sysctl may be removed again after r263758 has been merged to at
least stable/9 and stable/10, and releases have been cut from those
branches.
Discussed with: mjg
Reported by: theraven, rwatson
according to the method outlined in the AHCI spec.
Tested with FreeBSD 9/10/11 with MSI disabled,
and also NetBSD/amd64 (lightly).
Reviewed by: neel, tychon
MFC after: 3 weeks
to bus_space(9) and that uses the proto(4) driver for talking to
hardware. If the I/O resource is a memory mapped I/O resource,
then mmap(2) will be attempted to avoid read(2)/write(2) overhead.
Sponsored by: Juniper Networks, Inc.
It exposes I/O resources to user space, so that programs can peek
and poke at the hardware. It does not itself have knowledge about
the hardware device it attaches to.
Sponsored by: Juniper Networks, Inc.
Instead opening/closing provider by each of metadata classes, do it only
once in core code. Since for SCSI disks open/close means sending some
SCSI commands to the device, this change reduces taste time.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
FD_SETSIZE is often used as an argument to select or compared with an
integer file descriptor. Rather than force 3rd party software to add
explicit casts, just make it a plain (int) constant as on other
operating systems.
Previous discussion:
http://lists.freebsd.org/pipermail/freebsd-standards/2012-July/002410.html
