list lock, as there has been a report that an alternative lock order
is getting introduced. This should help ferret it out.
Reported by: Ed Maste <emaste at phaedrus dot sandvine dot ca>
device driver, owned by the network stack, or initialized by the device
driver before attach and read-only from then on.
Not all device drivers and network stack components currently follow
these rules, especially with respect to IFF_UP, and a few exceptions
with IFF_ALLMULTI.
MFC after: 7 days
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags. Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags. This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.
Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.
Reviewed by: pjd, bz
MFC after: 7 days
and move both flags from ifnet.if_flags to ifnet.if_drv_flags, making
and documenting the locking of these flags the responsibility of the
device driver, not the network stack. The flags for these two fields
will be mutually exclusive so that they can be exposed to user space as
though they were stored in the same variable.
Provide #defines to provide the old names #ifndef _KERNEL, so that user
applications (such as ifconfig) can use the old flag names. Using the
old names in a device driver will result in a compile error in order to
help device driver writers adopt the new model.
When exposing the interface flags to user space, via interface ioctls
or routing sockets, or the two fields together. Since the driver flags
cannot currently be set for user space, no new logic is currently
required to handle this case.
Add some assertions that general purpose network stack routines, such
as if_setflags(), are not improperly used on driver-owned flags.
With this change, a large number of very minor network stack races are
closed, subject to correct device driver locking. Most were likely
never triggered.
Driver sweep to follow; many thanks to pjd and bz for the line-by-line
review they gave this patch.
Reviewed by: pjd, bz
MFC after: 7 days
- Push 'i' into the only block where it is used.
- Remove redundant check for rt being NULL. If rt_check() hasn't
returned an error, then rt is valid.
Reviewed by: gnn
from the port number (if any exists). This unbreaks
env HTTP_PROXY="http://localhost:3128/" portsnap fetch
While I'm here, list both the host and the port in the error message
output if getaddrinfo() fails, since either of them could be responsible
for the failure.
than what we already have" message. [1]
When operating with the undocumented --debug option, replace "xargs
phttpget" with "xargs -t phttpget", since that might conceivably help
debugging.
Noticed by: simon [1]
m_copym(m, 0, M_COPYALL, how).
This is required for strict alignment architectures where we align the IP
header in the input path but m_copym() will create an unaligned copy in
bridge_broadcast(). m_copypacket() preserves alignment of the first mbuf.
Noticed by: Petri Simolin
Approved by: mlaier (mentor)
MFC after: 3 days
not holding any non-sleep-able-locks locks when copyin is called.
This gets executed un-conditionally since we have no function
to wire the buffer in this direction.
Pointed out by: truckman
MFC after: 1 week
the timeout routine.
- Fix locking in detach.
- Add locking in shutdown.
- Don't mess with the PCI command register in resume, the PCI bus driver
already does this for us.
- Add locking to the non-serial ifmedia routines.
- Fix locking in ioctl.
- Remove spls and support for 4.x.
MFC after: 1 week
fast, lightweight, and generally good way for users to keep their
ports trees up to date.
This is version 0.9.4 from the ports tree (sysutils/portsnap) with
the following changes:
1. The experimental pipelined http code is enabled. No seatbelts
in -CURRENT. (^_^)
2. The working directory has moved from /usr/local/portsnap to
/var/db/portsnap (as discussed on -arch two days ago).
3. Portsnap now fetches a list of mirrors (distributed as DNS SRV
records) and selects one randomly. This should help to avoid the
uneven loading which plagues the cvsup mirror network.
4. The license is now 2-clause BSD instead of 3-clause BSD.
5. Various incidental changes to make portsnap fit into the base
system's build mechanics.
X-MFC-After: 6.0-RELEASE
X-MFC-Before: 5.5-RELEASE
X-MFC-To: RELENG_6, RELENG_5, ports
discussed on: -arch and several other places
"yes please" from: simon, remko, flz, Diane Bruce
thinks this is a great idea: bsdimp
Hopes he didn't forget any files: cperciva
event handler, dev_clone, which accepts a credential argument.
Implementors of the event can ignore it if they're not interested,
and most do. This avoids having multiple event handler types and
fall-back/precedence logic in devfs.
This changes the kernel API for /dev cloning, and may affect third
party packages containg cloning kernel modules.
Requested by: phk
MFC after: 3 days
I copied strcasecmp() from userland to the kernel and it didn't worked!
I started to debug the problem and I find out that this line:
while (tolower(*us1) == tolower(*us2++)) {
was adding _3_ bytes to 'us2' pointer. Am I loosing my minds here?!...
No, in-kernel tolower() is a macro which uses its argument three times.
Bad tolower(9), no cookie.
the buffer has not been wired and we are holding any non-sleep-able locks,
drop a witness warning. If the buffer has not been wired, it is possible
that the writing of the data can sleep, especially if the page is not in
memory. This can result in a number of different locking issues, including
dead locks.
MFC after: 1 week
Discussed with: rwatson
Reviewed by: jhb
Crypto changes:
o change driver/net80211 key_alloc api to return tx+rx key indices; a
driver can leave the rx key index set to IEEE80211_KEYIX_NONE or set
it to be the same as the tx key index (the former disables use of
the key index in building the keyix->node mapping table and is the
default setup for naive drivers by null_key_alloc)
o add cs_max_keyid to crypto state to specify the max h/w key index a
driver will return; this is used to allocate the key index mapping
table and to bounds check table loookups
o while here introduce ieee80211_keyix (finally) for the type of a h/w
key index
o change crypto notifiers for rx failures to pass the rx key index up
as appropriate (michael failure, replay, etc.)
Node table changes:
o optionally allocate a h/w key index to node mapping table for the
station table using the max key index setting supplied by drivers
(note the scan table does not get a map)
o defer node table allocation to lateattach so the driver has a chance
to set the max key id to size the key index map
o while here also defer the aid bitmap allocation
o add new ieee80211_find_rxnode_withkey api to find a sta/node entry
on frame receive with an optional h/w key index to use in checking
mapping table; also updates the map if it does a hash lookup and the
found node has a rx key index set in the unicast key; note this work
is separated from the old ieee80211_find_rxnode call so drivers do
not need to be aware of the new mechanism
o move some node table manipulation under the node table lock to close
a race on node delete
o add ieee80211_node_delucastkey to do the dirty work of deleting
unicast key state for a node (deletes any key and handles key map
references)
Ath driver:
o nuke private sc_keyixmap mechansim in favor of net80211 support
o update key alloc api
These changes close several race conditions for the ath driver operating
in ap mode. Other drivers should see no change. Station mode operation
for ath no longer uses the key index map but performance tests show no
noticeable change and this will be fixed when the scan table is eliminated
with the new scanning support.
Tested by: Michal Mertl, avatar, others
Reviewed by: avatar, others
MFC after: 2 weeks
entry points that will be inserted over the life-time of the 6.x branch,
including for:
- New struct file labeling (void * already added to struct file), events,
access control checks.
- Additional struct mount access control checks, internalization/
externalization.
- mac_check_cap()
- System call enter/exit check and event.
- Socket and vnode ioctl entry points.
MFC after: 3 days
o separate configured beacon interval from listen interval; this
avoids potential use of one value for the other (e.g. setting
powersavesleep to 0 clobbers the beacon interval used in hostap
or ibss mode)
o bounds check the beacon interval received in probe response and
beacon frames and drop frames with bogus settings; not clear
if we should instead clamp the value as any alteration would
result in mismatched sta+ap configuration and probably be more
confusing (don't want to log to the console but perhaps ok with
rate limiting)
o while here up max beacon interval to reflect WiFi standard
Noticed by: Martin <nakal@nurfuerspam.de>
MFC after: 1 week
We're checking for /var/run/jail_<name>.id file and if it exists, we don't
start the jail. It should be also safe in case of reboot(8), because
rc.d/cleanvar script is going to remove /var/run/jail_* files.
It helps to avoid potential mess when the same jail is started twice,
because of an administrator mistake (been there, done that).
MFC after: 1 week
