There were a couple of attempts in the past to reduce it since it
took more than 1ms. Because mii_tick() periodically polls link
status, waiting more than 1ms for each GMII register access was
overkill. Unfortunately all previous attempts were failed with
various ways on different controllers.
This time, add additional 20us dealy at the end of GMII register
access which seems to requirement of all RealTek controllers to
issue next GMII register access request. This is the same way what
Linux does.
numbers. bge(4) supports too many models such that it's
unreasonable to list all these controllers in one line description
of name. While I'm here mention that BCM590x/BCM5779x is Fast
Ethernet controller.
bge(4) still lacks support for some controllers but supporting
these controllers should be easy now and adding new controllers
do not require touching .Nd any more.
Obtained from: OpenBSD
- Use KERNCONFDIR with KERNCONF instead of copying the kernel config into the source tree
so included kernel configs work.
- Put more stuff in the _.bk/_.ik log file, not just make statements.
- Add the kernel config name to the pprint during kernel installation.
- Add NANO_MODULES providing a list of modules to build and install.
Reviewed by: imp
MFC after: 2 weeks
ensure that grow_amount is a multiple of the page size. Otherwise, the
kernel may crash in swap_reserve_by_uid() on HEAD and FreeBSD 8.x, and
produce a core file with a missing stack on FreeBSD 7.x.
Diagnosed and reported by: jilles
Reviewed by: kib
MFC after: 1 week
actually 16 I/O lines but the other ones are used for system devices and
interrupts.
The IXP4XX platform can set interrupts on these pins for
high/low/rising/falling/transitional but this is not implemented yet.
The Cambria has the same interface but as all the pins are assigned to system
functions the gpio header is toggled via a PLD on the i2c bus and is not
supported by this commit.
function from the timer code to util, rename it appropriately and
also fix a bug in sctp_get_prev_mtu(), where calling it with a
value existing in the MTU table did not return a smaller one.
MFC after: 3 days.
because there's inter-entry garbage, just scan forward
to find the next one. This allows us to handle a lot
of Zip archives that have been modified in-place.
Thanks to: Gleb Kurtsou for sending me a sample archive
controllers. sk(4) never reprogrammed station address for Yukon
controllers so overriding station address with ifconfig(8) was not
possible.
Fix the bug by reprogramming all registers that control station
address, flow-control and virtual station address. Virtual station
address has no use at this moment since driver does not make use of
fail over feature.
Tested by: "Mikhail T." <mi+thun <> aldan.algebra.com>
MFC after: 1 week
the IEEE80211_C_RATECTL flag set, default to NONE for all drivers. Only if
a driver calls ieee80211_ratectl_init() check if the NONE algo is still
selected and try to use AMRR in that case. Drivers are still free to use
any other algo by calling ieee80211_ratectl_set() prior to the
ieee80211_ratectl_init() call.
After this change it is now safe to assume that a ratectl algo is always
available and selected, which renders the IEEE80211_C_RATECTL flag pretty
much useless. Therefore revert r211314 and 211546.
Reviewed by: rpaulo
MFC after: 2 weeks
