o add net80211 support for a tdma vap that is built on top of the
existing adhoc-demo support
o add tdma scheduling of frame transmission to the ath driver; it's
conceivable other devices might be capable of this too in which case
they can make use of the 802.11 protocol additions etc.
o add minor bits to user tools that need to know: ifconfig to setup and
configure, new statistics in athstats, and new debug mask bits
While the architecture can support >2 slots in a TDMA BSS the current
design is intended (and tested) for only 2 slots.
Sponsored by: Intel
when the CC is not set. Note NO_COUNTRY is set to 0xffff for now
(must be 16 bits as ieee80211_regdomain struct defines sku's and
cc's as uint16_t which may need fixing).
o do not require 1/2 and 1/4 rate channels be present in the
calibration list when doing a gsm regulatory change; the
existing 900MHz cards are not self-identifying so there is
no way (using the calibration channel list) to check
o store XML_Parser in the state block so we can report line numbers for errors
o complain about netband w/o mode
o complain about unknown modes
o complain about band w/o enclosing netband
o complain about duplicate freqband
o complain about unknown channel flags
o complain about band w/o freqband's
o complain about band w/o maxpower
o complain about country w/o ISO cc
o complain about country w/o regdomain reference
all others. Use this to disambiguate cmd line arguments that can
be either clone params or regular parameters so, in particular,
"bssid" again works as a regular parameter.
While here leverage the above to improve the logic for flushing
clone operations on the first !clone cmd line parameter.
Reviewed by: jhay
header is now in two parts: bsdxml.h and bsdxml_external.h, representing
the expat.h and expat_external.h headers. Updated the info on the man
page as well. Also, fixed a type-error in a printf in
sbin/ifconfig/regdomain.c that would cause a compiler warning.
Approved by: sam, phk
Note this includes changes to all drivers and moves some device firmware
loading to use firmware(9) and a separate module (e.g. ral). Also there
no longer are separate wlan_scan* modules; this functionality is now
bundled into the wlan module.
Supported by: Hobnob and Marvell
Reviewed by: many
Obtained from: Atheros (some bits)
o mark cmds/parameters to indicate they are potential arguments to a clone
operation (e.g. vlantag)
o when handling a create/clone operation do the callback on seeing the first
non-clone cmd line argument so the new device is created and can be used;
and re-setup operating state to reflect the newly created device
Reviewed by: Eugene Grosbein
MFC after: 2 weeks
interface. Once the limit is reached packets with unknown source addresses are
dropped until an existing host cache entry expires or is removed. Useful to
use with the STICKY cache option.
Sponsored by: miniSuperHappyDevHouse NZ
it would return true on a partial match where it would think the edsc module
was already present by having a positive match on 'ed'. This changes it so
that it compares the full string including the nul terminators.
This also fixes a buffer overflow in the ifkind variable where the length of
the interface name in *argv wasnt checked for size.
Reviewed by: brooks
Approved by: re (gnn)
communicate with another private port.
All unicast/broadcast/multicast layer2 traffic is blocked so it works much the
same way as using firewall rules but scales better and is generally easier as
firewall packages usually do not allow ARP blocking.
An example usage would be having a number of customers on separate vlans
bridged with a server network. All the vlans are marked private, they can all
communicate with the server network unhindered, but can not exchange any
traffic whatsoever with each other.
Approved by: re (rwatson)
bridged, previously legitimate traffic was not passed as the bridge could not
tell that it was on a different Ethernet segment.
All non-tagged traffic is treated as vlan1 as per IEEE 802.1Q-2003
previous commit:
Remove IPX over IP tunneling support, which allows IPX routing over IP
tunnels, and was not MPSAFE. The code can be easily restored in the
event that someone with an IPX over IP tunnel configuration can work
with me to test patches.
This removes one of five remaining consumers of NET_NEEDS_GIANT.
Approved by: re (kensmith)
Spotted by: Artem Naluzhny <tutat nhamon dot com dot ua>
o revised channel handling support; ifconfig now queries the kernel to
find the list of available channels and handles channel promotion;
channel attributes can be specified as part of the channel; e.g. 36:a
for channel 36 in 11a (as opposed to turbo A or HT A)
o use channel list to map between freq and IEEE channel #; this eliminates
all knowledge of how the mapping is done and fixes handling of cases
where channels overlap in the IEEE channel # space but are distinct in
the frequency+attributes space (e.g. PSB)
o add new knobs: bgscan, ff (Atheors fast frames), dturbo (Atheros
Dynamic Turbo mode), bgscanidle, bgscanintvl, scanvalid, roam:rssi11a,
roam:rssi11b, roam:rssi11g, roam:rate11a, roam:rate11b, roam:rate11g
(roaming parameters), burst, doth (forthcoming 11h support)
o print contents of WME, ATH, WPA, RSN, information elements with -v option
o print signal strength in dBm
o print noise floor in dBm
o add list txpow to print tx power caps/channel
o change default channel display in status to be more informative
The name trunk is misused as the networking term trunk means carrying multiple
VLANs over a single connection. The IEEE standard for link aggregation (802.3
section 3) does not talk about 'trunk' at all while it is used throughout IEEE
802.1Q in describing vlans.
The lagg(4) driver provides link aggregation, failover and fault tolerance.
Discussed on: current@
