spanning tree support.
Based on Jason Wright's bridge driver from OpenBSD, and modified by Jason R.
Thorpe in NetBSD.
Reviewed by: mlaier, bms, green
Silence from: -net
Approved by: mlaier (mentor)
Obtained from: NetBSD
.depends other then the commant line.
Also remove -g from CFLAGS. The user should add it to CFLAGS if they
desire debug support.
Reviewed by: ru (in concept)
MFC After: 7 days
hosts to share an IP address, providing high availability and load
balancing.
Original work on CARP done by Michael Shalayeff, with many
additions by Marco Pfatschbacher and Ryan McBride.
FreeBSD port done solely by Max Laier.
Patch by: mlaier
Obtained from: OpenBSD (mickey, mcbride)
its value once per ifconfig run. Use Sam's new callback
operation to set it when everything is done.
The purpose for this is that if you did something like
ifconfig bge0 media 100baseTX mediaopt full-duplex
multiple times it would end up causing the PHY to re-sync
since it would send the IOCTLs:
ifconfig bge0 media 100baseTX -mediaopt full-duplex
ifconfig bge0 media 100baseTX mediaopt full-duplex
This would cause the PHY to be updated twice even though
there really wasn't any change since the check in
sys/net/if_media.c would always fail.
Caveat is that this doesn't fix the case of:
ifconfig bge0 media autoselect
etc. since in sys/net/if_media.c it forces an autoselect to go through
the entire process in ifmedia_ioctl :-( :
/*
* If no change, we're done.
* XXX Automedia may invole software intervention.
* Keep going in case the the connected media changed.
* Similarly, if best match changed (kernel debugger?).
*/
if ((IFM_SUBTYPE(newmedia) != IFM_AUTO) &&
(newmedia == ifm->ifm_media) &&
(match == ifm->ifm_cur))
return 0;
Briefly looked at by: sam
special-purpose code to display status for an interface for
state that was not address-oriented. This status reporting
was merged in to the address-oriented status reporting but
did not work for link address reporting (as discovered with
fwip interfaces). Correct this mis-merge and eliminate the
bogus kludge that was used for link-level address reporting.
o add an af_other_status method for an address family for
reporting status of things like media, vlan, etc.
o call the af_other_status methods after reporting address
status for an interface
o special-case link address status; when reporting all
status for an interface invoke it specially prior to
reporting af_other_status methods (since it requires the
sockaddr_dl that is passed in to status separately from
the rtmsg address state)
o correct the calling convention for link address status;
don't cast types, construct the proper parameter
This fixes ifconfig on fwip interfaces.
o break per-address family support out into separate files
o modularize per-address family and functional operations using
a registration mechanism; this permits configuration according
to which files you include (but beware that order of the files
is important to insure backwards compatibility)
o many cleanups to eliminate incestuous behaviour, global variables,
and poor coding practices (still much more to fix)
The original motivation of this work was to support dynamic addition
of functionality based on the interface so we can eliminate the various
little control programs and so that vendors can distribute ifconfig
plugins that support their in-kernel code. That work is still to be
completed.
o Update 802.11 support for all the new net80211 functionality; some
of these operations (e.g. list *) may be better suited in a different
program
increasing it. Add code to ifconfig to use this size to find the
sockaddr_dl after the struct if_data in the routing message. This
allows struct if_data to grow (up to 255 bytes) without breaking
ifconfig.
Submitted by: peter
the bug exists in little-endian machine, it was not triggered due
to the difference of memory ordering between little/big endian
machines. Instead of relying on possibly modified value during
function invokcations, use saved copy of ifr.ifr_addr.sa_family.
Also add a comment at the top of ifconfig.c clarifying the issue
so the bug won't re-appear.
Approved by: jake
Reviewed by: yar
prior sysctl due to the structure growing between calls try again.
Also try again for deleting routes if things fail. We've seen
route -f fail this way which does not actually flush all routes.
This fixes it. It will whine but it will do the work.
PR: 56732
Obtained from: IronPort
like tun are naming their modules using the 'if_; prefix and previous version of
the code failed to detect their presence in the kernel, resulting in the same
module being loaded twice.
the corresponding manpage has been committed.
The rest of "vlan" words, which are refering
to the technology itself, should be capitalized.
MFC after: 1 week
reorganize the printing of the interface name when using wildcard
cloning so it is not printed if it we either immediately rename or
destroy the interface.
Reviewed by: ru
from the sdl because strlcpy requires that the source string be
NUL-terminated unlike strncpy.
Submitted by: Peter Jeremy <PeterJeremy at optushome dot com dot au>
name.
Prevent the kernel from potentially overflowing the interface name
variable. The size argument of strlcpy is complex because the name is
not null-terminated in sdl_data.
and to make sure that we catch oversized arguments rather than silently
truncate them. I dont know if sscanf will reject an integer if it will
not fit in the short return variable or not, but this way it should be
detected.
be changed, it is very convenient to be able to toggle SDH/Sonet,
idle/unassigned cells and scrambled mode and to see the carrier
state.
Reviewed by: -arch (if_media.h definitions)
regarding 802.1 MAC and Mandatory Access Control (MAC). Some
potential for confusion remains further in other areas of the
system regarding Message Authentication Codes (MAC).
Requested by: wollman
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
interfaces using the 'mac' argument. Without MAC support in the
kernel, this does not change the behavior of ifconfig.
Approved by: re
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
Setting this flag on an ethernet interface blocks transmission of packets
and discards incoming packets after BPF processing.
This is useful if you want to monitor network trafic but not interact
with the network in question.
Sponsored by: http://www.babeltech.dk
Also, for all interfaces in this mode pass all ethernet frames to upper layer,
even those not addressed to our own MAC, which allows packets encapsulated
in those frames be processed with packet filters (ipfw(8) et al).
Emphatically requested by: Anton Turygin <pa3op@ukr-link.net>
Valuable suggestions by: fenner
that could be used to set/get arbitrary length link level
addresses. Alias "lladdr" parameter and "ether" family
to the new "link" family for backward compatibility.
PR: bin/31476
MFC after: 1 week
It does not help modern compilers, and some may take some hit from it.
(I also found several functions that listed *every* of its 10 local vars with
"register" -- just how many free registers do people think machines have?)
The first "synopsis" example has a "[/prefixlength]" which shouldn't
be there, since that stuff is part of the preceeding "address" as is
explained in the description of "address".
(The way it is now, 192.168.0.1/16/prefixlength would be a proper
operand. Note that "prefixlength" is not mentioned by name anywhere.)
PR: 32462
Submitted by: Gary W. Swearingen <swear@blarg.net>
a packed array so sizeof work. This broke RFMON mode and passing
up 802.11 packets.
The Linux emulation code was derived from the open source Linux driver to
maintain compatibility.
LEAP support is added, hints from Richard Johnson. I've verified this
locally with PC350v42510.img firmware. More bug fixing from Marco to
fix long passwords.
Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep
so it doesn't look like your system died during a flash update.
Install header files in /usr/include/dev/an
Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol.
This way you can manage 2 keys a little easier. Map the home mode into
key 5. Enhance ifconfig to dump the various configured SSIDs. I use
a bunch of different ones and roam between them. Use the syntax similar
to the WEP keys to deal with setting difference SSIDs.
Bump up up the Card capabilities RID since they added 2 bytes to it
in the latest firmware. Thankfully we changed it from a terminal
failure so the card still worked but the driver whined.
Some cleanup patches from Marco Molteni.
Submitted by: Richard Johnson <raj@cisco.com>
Marco Molteni <molter@tin.it>
and myself
Various checks: David Wolfskill <david@catwhisker.org>
Reviewed by: Brooks Davis <brooks@freebsd.org>
Warner Losh <imp@freebsd.org>
Approved by: Brooks Davis <brooks@freebsd.org>
Warner Losh <imp@freebsd.org>
Obtained from: Linux emulation API's from Aironet driver.
This works for wi(4), but apparantly other wireless drivers seem to do
the right thing.
Submitter and yours truly both got Mislead(tm).
Submitted by: udp <udp@sneakerz.org>
index, then retrieve statistics for that index, rather than retrieving
all interfaces and then looking for a matching name. This allows the
user to refer to an interface via an alias name.
While I'm here, also perform a few assorted cleanups.
COPTS towards the end of final CFLAGS so that it can be used to
override Makefile and other defaults. Using it in Makefiles risks
having options set using it clobbered when somebody uses it on the
command line.
Approved by: bde
This work was based on kame-20010528-freebsd43-snap.tgz and some
critical problem after the snap was out were fixed.
There are many many changes since last KAME merge.
TODO:
- The definitions of SADB_* in sys/net/pfkeyv2.h are still different
from RFC2407/IANA assignment because of binary compatibility
issue. It should be fixed under 5-CURRENT.
- ip6po_m member of struct ip6_pktopts is no longer used. But, it
is still there because of binary compatibility issue. It should
be removed under 5-CURRENT.
Reviewed by: itojun
Obtained from: KAME
MFC after: 3 weeks
printed on a single, very long, and generally unreadable line. This
isn't very useful. It's also really ugly and most of the time you don't
care what media is supported anyway.
PR: 27701
Submitted by: Brooks Davis <brooks@one-eyed-alien.net>
despite the fact that most people want to set exactly the same settings
regardless of which card they have. It has been repeatidly suggested
that this configuration should be done via ifconfig. This patch
implements the required functionality in ifconfig and add support to the
wi and an drivers. It also provides partial, untested support for the
awi driver.
PR: 25577
Submitted by: Brooks Davis <brooks@one-eyed-alien.net>
This allows you to set ether addresses with 'ifconfig ether'. Also, use
some saner socket address families that allow several special case tests
to be removed.
address on an interface. This basically allows you to do what my
little setmac module/utility does via ifconfig. This involves the
following changes:
socket.h: define SIOCSIFLLADDR
if.c: add support for SIOCSIFLLADDR, which resets the values in
the arpcom struct and sockaddr_dl for the specified interface.
Note that if the interface is already up, we need to down/up
it in order to program the underlying hardware's receive filter.
ifconfig.c: add lladdr command
ifconfig.8: document lladdr command
You can now force the MAC address on any ethernet interface to be
whatever you want. (The change is not sticky across reboots of course:
we don't actually reprogram the EEPROM or anything.) Actually, you
can reprogram the MAC address on other kinds of interfaces too; this
shouldn't be ethernet-specific (though at the moment it's limited to
6 bytes of address data).
Nobody ran up to me and said "this is the politically correct way to
do this!" so I don't want to hear any complaints from people who think
I could have done it more elegantly. Consider yourselves lucky I didn't
do it by having ifconfig tread all over /dev/kmem.
Improve compatibility with BSD/OS, and also more accurately reflect that
IP aliases aren't really any different than the primary IP address on an
interface.
Reviewed by: dcs
Approved by: jkh
IPv6 scoped addr display is not yet supported by ifconfig
and route. Now almost of IPv6 apps support it, so its support
in ifconfig and route is important to keep consisetncy, and
to avoid user confusion.
Approved by: jkh
packet divert at kernel for IPv6/IPv4 translater daemon
This includes queue related patch submitted by jburkhol@home.com.
Submitted by: queue related patch from jburkhol@home.com
Reviewed by: freebsd-arch, cvs-committers
Obtained from: KAME project
we're about to operate on, try to load one. Don't complain if the
load fails, and always press on regardless (there may not be a module
suitable or required).
With the renaming of the PCI ethernet driver modules and the addition
of appropriate miibus dependancies on those modules that need it, it is
now no longer necessary to compile many ethernet drivers into the kernel;
they will be loaded on demand the first time they are ifconfig'ed.
Inspiration from: mount
Reviewed by: obrien
This is inteded for to allow ifconfig to print various unstructured
information from an interface.
The data is returned from the kernel in ASCII form, see the comment in
if.h for some technicalities.
Canonical cut&paste example to be found in if_tun.c
Initial use:
Now tun* interfaces tell the PID of the process which opened them.
Future uses could be (volounteers welcome!):
Have ppp/slip interfaces tell which tty they use.
Make sync interfaces return their media state: red/yellow/blue
alarm, timeslot assignment and so on.
Make ethernets warn about missing heartbeats and/or cables
This means that the driver will add/delete routes when it knows it is
up/down, rather than have the generic code belive it is up if configured.
This is probably most useful for serial lines, although many PHY chips
could probably tell us if we're connected to the cable/hub as well.
them as ints. Among other bugs, doing so at best caused benign
overflow followed by fatal sign extension on machines with 32-bit
ints and 64-bit longs.
place rather than updating the main loop's index variables from within
a subroutine and other revolting things like that. Move some more
globals into local variables.
program and it's use of global variables. Somehow, I managed to miss the
most obvious case.. "ifconfig ed0 10.0.0.1" failed (no "inet")
Submitted by: dfr
family inet if not specified. (eg: "ifconfig ed0" down would fail because
no family was specified, even though the up/down status is not per family)
Pointed out by: Wolfgang Helbig <helbig@MX.BA-Stuttgart.De>
- parse command options using getopt for consistancy
- sanitise the command parsing so that it's less like spaghetti
- implement a "-l" option (idea from NetBSD - just list names)
- attempt to clean up the sysctl parsing loop some more. It still needs
to be taken out the back and shot though.
- cut down on global usage, but there's a lot more scope for this.
- make usage string a bit closer to reality (it was missing lots of things)
Unfortunately, I did this for the second time but with the memory of
the NetBSD version still recently in my mind. It's hard to redo simple
changes or getopt stuff without making it look like what you've been
working with a few hours ago.
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.
Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.
do it themselves. (Some of these programs actually depended on this
beyond compiling the definition of struct ifinfo!) Also fix up some
other #include messes while we're at it.
- Don't link against libkvm and don't uselessly include <kvm.h>.
- Declare constant objects as const.
- Declare functions with the correct types.
- Call functions with the correct parameters.
Not fixed:
- The sysctl parsing remains ugly (but it may be the best we can do).
- atnetrange() should use strtoul() rather than sscanf() for better
error checking.
it stopped us from removing or setting loopback address
on lo0:
also make use of the fact the athe sockaddre_at struct now has a "netrange"
field.
CVS ----------------------------------------------------------------------
I discovered that when asking for the IFLIST via sysctl(), if you
specify only AF_INET address, it actually gives you only AF_INET..
(suprise, suprise..!)
Now, it should "do the right thing" in just about all cases... The only
problem, is that "the right thing" isn't exactly clear in all cases.
ifconfig would segfault on "ifconfig ed0 ether up" and the like).
The main reason for this commit was that an "ifconfig -a" would also show
the AF_INET addresses in AF_IPX form (if the kernel was configured for IPX)
due to insufficient AF checking in my "new way" of doing it.
and the ethernet address for non-root users.
I apologise to the world for propagating the ugliness of some of the code
constructs within ifconfig... Fixing them would just abou mean rewriting
most of the function call interfaces, something I didn't have the stomach
for. :-)
