it via pci_get_vpd_*() rather than always reading it for each device during
boot. I've left the tunable so that it can still be turned off if a device
driver causes a lockup via a query to a broken device, but devices whose
drivers do not use VPD (the vast majority) should no longer result in
lockups during boot, and most folks should not need to tweak the tunable
now.
Tested on: bge(4)
Silence from: jmg
one (hardware & global lock). This should address witness complaints that
a duplicate mutex is being acquired. Be sure to free the mutex to fix a
potential memory leak.
MFC after: 3 days
cpufreq_pre_change is called before the change, giving each driver a chance
to revoke the change. cpufreq_post_change provides the results of the
change (success or failure). cpufreq_levels_changed gives the unit number
of the cpufreq device whose number of available levels has changed. Hook
in all the drivers I could find that needed it.
* TSC: update TSC frequency value. When the available levels change, take the
highest possible level and notify the timecounter set_cputicker() of that
freq. This gets rid of the "calcru: runtime went backwards" messages.
* identcpu: updates the sysctl hw.clockrate value
* Profiling: if profiling is active when the clock changes, let the user
know the results may be inaccurate.
Reviewed by: bde, phk
MFC after: 1 month
other C files:
- Move sbcreatecontrol() and sbtoxsockbuf() to uipc_sockbuf.c. While
sbcreatecontrol() is really an mbuf allocation routine, it does its work
with awareness of the layout of socket buffer memory.
- Move pru_*() protocol switch stubs to uipc_socket.c where the non-stub
versions of several of these functions live. Likewise, move socket state
transition calls (soisconnecting(), etc) to uipc_socket.c. Moveo
sodupsockaddr() and sotoxsocket().
doesn't need to be first in softc now. (It was the whole
ifnet structure itself that needed to be first in the good
old days.) Fix the respective comment accordingly.
Add xrefs to ifnet(9) in some other comments while I'm here.
Pointed out by: thompsa
imitating an Ethernet device, so vlan(4) and if_bridge(4) can be
attached to it for testing and benchmarking purposes. Its source
can be an introduction to the anatomy of a network interface driver
due to its simplicity as well as to a bunch of comments in it.
(The rest of needed changes were in my previous commit, which got
interrupted in the middle. Alas, CVS commits are not atomic.)
imitating an Ethernet device, so vlan(4) and if_bridge(4) can be
attached to it for testing and benchmarking purposes. Its source
can be an introduction to the anatomy of a network interface driver
due to its simplicity as well as to a bunch of comments in it.
function may be called without any TCP SACK option blocks present. Protect
iteration over SACK option blocks by checking for SACK options present flag
first.
Bug reported by: wkoszek, keramida, Nicolas Blais
explaining that some more locking is needed. The routing pieces are done,
but there is an interlocking issue between optionally compiled code and
mandatory code.
Spotted by: kris
1) Eliminate an unnecessary check for fictitious pages. Specifically,
only device-backed objects contain fictitious pages and the object is
not device-backed.
2) Change the types of "psize" and "tmpidx" to vm_pindex_t in order to
prevent possible wrap around with extremely large maps and objects,
respectively. Observed by: tegge (last summer)
temporary mapping created by locore so that the lowest two to four
megabytes can become a permanent identity mapping. This implementation
avoids any use of a large page mapping.
FreeBSD/arm installworld install is only 170MB. The smallest SD card
I could find at the store today was 512MB (and it was only $10 after
rebate), with a 2GB card for as low as $25.00...
Now that the IIC stuff has been sorted out, include that as well.
Include hints for the icee 16kb 16-bit i2c device. It should include
info about the temperature sensor as well, but that driver isn't quite
ready.
Add bpf for dhclient happiness.
MFC After: 1 week
some devices (and not others). To get instances onto the iicbus, one
now needs hints or an identify routine. We also do not probe the bus
for devices because many iic devices cannot be safely probed (and when
they can, the probe order turns out to be somewhat difficult to get
right).
# I'm not 100% sure that the iicsmb removal is right. Please contact me if
# this causes difficulty.
robustness of IIC transactions when parts aren't present. This also
removes a bunch of debug. This also moves this driver to 7-1
addressing rather than 6-0 addressing, which is more inline with all
the other iic drivers in the tree. I've tested this for about a
million years on the systems at work.
The relevant changes for FreeBSD (excerpt from the release note):
* Newly implemented CORE EXT words: CASE, OF, ENDOF, and ENDCASE. Also
added FALLTHROUGH, which works like ENDOF but jumps to the instruction
just after the next OF.
* Bugfix: John-Hopkins locals syntax now accepts | and -- in the comment
(between the first -- and the }.)
* Bugfix: Changed vmGetWord0() to make Purify happier. The resulting
code is no slower, no larger, and slightly more robust.
o tcp_input() now handles TCP segment sanity checks and preparations
including the INPCB lookup and syncache.
o tcp_do_segment() handles all data and ACK processing and is IPv4/v6
agnostic.
Change all KASSERT() messages to ("%s: ", __func__).
The changes in this commit are primarily of mechanical nature and no
functional changes besides the function split are made.
Discussed with: rwatson
- Change exca_activate_resource() to call BUS_ACTIVATE_RESOURCE() before
calling exca_(io|mem)_map() since the latter use rman_get_bus(tag|handle)
and the recent changes to nexus(4) mean that you need to activate a
resource before reading the bus tag and handle. This was true before,
but now the nexus(4) drivers on x86 and ia64 are more forceful about it.
Reviewed by: imp
